LE 30W LED Security Light with Motion Sensor

1. Introduction

Thank you for choosing the LE 30W LED Security Light with Motion Sensor. This product is designed to provide efficient and reliable outdoor illumination with advanced motion sensing and photocell technology. Please read this manual carefully before installation and operation to ensure proper use and maximize the lifespan of your light.

2. Safety Information

WARNING: Risk of electric shock. Disconnect power before installation or servicing.

• Ensure the power supply is turned off at the circuit breaker before beginning installation.
• This product must be installed by a qualified electrician in accordance with local electrical codes.
• Do not connect to a dimmer switch.
• Do not install on a surface that is not stable or capable of supporting the weight of the fixture.
• Avoid looking directly into the LED light source when illuminated, as it may cause eye strain or damage.
• Ensure all connections are secure and properly insulated to prevent short circuits.

3. Package Contents

Verify that all components are present before installation:

• 1 x LE 30W LED Security Light with Motion Sensor
• 1 x Mounting Bracket (pre-attached)
• 1 x Light Kit (includes screws and wall anchors)
• 1 x User Manual (this document)

4. Product Overview

Familiarize yourself with the components of your security light:

Figure 4.1: Front view of the LE 30W LED Security Light, showing the main light panel, integrated motion sensor, and power cable.

Figure 4.2: Product dimensions and construction details, highlighting the durable aluminum casing, ETL listing, and frosted shade.

• LED Panel: High-brightness 30W LED array.
• Motion Sensor (PIR): Detects infrared heat signatures for motion activation.
• Photocell: Detects ambient light levels for dusk-to-dawn operation.
• Adjustable Bracket: Allows for multi-angle positioning.
• Heat Sink: Located on the back for efficient heat dissipation.

5. Setup and Installation

This light is designed for wall or eave mounting. Ensure the mounting surface is sturdy and can support the fixture's weight.

5.1 Mounting Options

Figure 5.1: Illustration of flexible mounting positions and sensor rotation.

• Wall Mounted: Securely attach to a vertical wall surface.
• Under Eave Mounting: Ideal for overhead coverage, mounted to the underside of an eave.
• Adjustable Positioning: The lamp and sensor can be rotated to achieve optimal coverage.

5.2 Installation Steps

1. Turn off Power: Locate the circuit breaker controlling the installation area and turn off the power. Verify power is off using a voltage tester.
2. Prepare Mounting Surface: Mark the drilling points for the mounting bracket on your desired surface.
3. Drill Holes: Drill pilot holes at the marked locations. Insert wall anchors if necessary.
4. Attach Bracket: Secure the mounting bracket to the surface using the provided screws.
5. Wire Connections: Connect the light's wires to your household wiring. Typically, this involves connecting the live (black) wire to live, neutral (white) to neutral, and ground (green/bare copper) to ground. Ensure all connections are tight and insulated with wire nuts.
6. Mount Fixture: Attach the light fixture to the secured mounting bracket. Tighten any screws to hold the light firmly in place.
7. Adjust Angle: Adjust the angle of the light fixture and the motion sensor to your desired coverage area.
8. Restore Power: Once installation is complete and all connections are secure, restore power at the circuit breaker.

6. Operating Instructions

The LE 30W LED Security Light features adjustable settings for optimal performance.

6.1 Sensor Adjustments

Figure 6.1: Sensor adjustment knobs for TIME, SENS, and LUX settings.

• TIME (Delay Time): Controls how long the light stays on after motion is detected. Adjustable from approximately 3 seconds to 8 minutes (480 seconds). Rotate the knob clockwise to increase the duration, counter-clockwise to decrease.
• SENS (Sensitivity): Adjusts the detection range of the motion sensor. Adjustable from approximately 4 meters to 10 meters (13 to 33 feet). Rotate clockwise for higher sensitivity and longer detection range, counter-clockwise for lower sensitivity and shorter range.
• LUX (Light Sensitivity): Determines the ambient light level at which the motion sensor becomes active.
  • Rotate towards the sun symbol (): The light will activate with motion during both day and night.
  • Rotate towards the moon symbol (): The light will only activate with motion when ambient light levels are low (at dusk or night). This is the recommended setting for energy saving.

6.2 Motion Detection Range

Figure 6.2: The sensor has a 120-degree detection angle and a maximum range of 10 meters.

The motion sensor has a detection angle of 120 degrees and a maximum range of 10 meters (33 feet). For optimal performance, ensure the sensor is not obstructed and is positioned to cover the desired area.

7. Maintenance

Regular maintenance ensures the longevity and optimal performance of your security light.

• Cleaning: Periodically clean the light fixture and sensor lens with a soft, damp cloth. Do not use abrasive cleaners or solvents.
• Inspection: Regularly inspect the wiring and mounting for any signs of wear, damage, or loosening.
• Heat Dissipation: Ensure the heat sink on the back of the fixture is free from debris or obstructions to allow for proper heat dissipation.

Figure 7.1: The heat sink on the back of the unit effectively dissipates heat, crucial for product longevity.

8. Troubleshooting

If you encounter issues with your security light, refer to the following common problems and solutions:

9. Specifications

10. Warranty and Support

This product comes with a manufacturer-and-seller-combination warranty. For specific warranty terms and conditions, please refer to the product packaging or contact your point of purchase.

Customer Support

If you have any questions, require technical assistance, or need to report an issue, please contact Lepro customer support through the following channels:

• Online: Visit the official Lepro website for support resources and contact information.
• Email: Refer to your purchase documentation for the customer service email address.
• Phone: Check the product packaging or Lepro's website for a customer service phone number.

Please have your product model number (340005-DW-US) and purchase date ready when contacting support.