BlitzWolf BW-AS1 Wireless Bluetooth Speaker User Manual

1. Introduction

The BlitzWolf BW-AS1 is a high-fidelity wireless Bluetooth speaker designed to deliver clear, balanced audio. Featuring dual drivers and a robust battery, it offers versatile connectivity options including Bluetooth 4.0 and a 3.5mm AUX-in port, along with hands-free calling capabilities.

2. Package Contents

Please check the package for the following items:

• 1x BlitzWolf BW-AS1 Wireless Bluetooth Speaker
• 1x USB Charging Cable
• 1x 3.5mm Audio Cable
• 1x User Manual

3. Product Overview

Figure 3.1: Top Panel Controls
This image displays the top surface of the BlitzWolf BW-AS1 speaker, highlighting the power button, play/pause button, and volume control buttons.

Figure 3.2: Rear Panel Ports
This image shows the back of the BlitzWolf BW-AS1 speaker, indicating the DC 5V charging port and the AUX-in port.

Button Functions:

• Power Button: Press and hold to power on/off. Short press to switch modes (Bluetooth/AUX).
• Play/Pause Button: Short press to play or pause music. During a call, short press to answer/end, long press to reject.
• Volume Down (-): Short press to decrease volume. Long press for previous track.
• Volume Up (+): Short press to increase volume. Long press for next track.

4. Setup

4.1 Charging the Speaker

1. Connect the provided USB charging cable to the DC 5V port on the speaker.
2. Connect the other end of the USB cable to a USB power adapter (not included) or a computer's USB port.
3. The charging indicator light will illuminate. A full charge takes approximately 3.5 hours.
4. Once fully charged, the indicator light will change or turn off (refer to specific LED behavior in the next section).

4.2 Powering On/Off

• To power on, press and hold the Power Button until you hear an audible prompt.
• To power off, press and hold the Power Button again until you hear an audible prompt.

5. Operating Instructions

5.1 Bluetooth Pairing

1. Ensure the speaker is powered on and in Bluetooth pairing mode (indicated by a flashing LED, typically blue). If not, short press the Power Button to switch modes.
2. On your mobile device (smartphone, tablet, laptop), enable Bluetooth.
3. Search for available Bluetooth devices. You should see "BW-AS1" in the list.
4. Select "BW-AS1" to connect. Once paired, the speaker will emit an audible confirmation, and the LED indicator will become solid blue.
5. The speaker will automatically attempt to reconnect to the last paired device when powered on.

5.2 AUX-in Mode

1. Connect one end of the provided 3.5mm audio cable to the AUX-in port on the speaker.
2. Connect the other end of the 3.5mm audio cable to the audio output jack of your device (e.g., smartphone, MP3 player, computer).
3. The speaker will automatically switch to AUX-in mode, or you may need to short press the Power Button to cycle to AUX mode.
4. Audio will now play through the speaker from your connected device. Volume can be controlled via both the speaker and the connected device.

5.3 Hands-Free Calling

• When a call comes in while connected via Bluetooth, the music will pause.
• Short press the Play/Pause Button to answer the call.
• To end the call, short press the Play/Pause Button again.
• To reject an incoming call, long press the Play/Pause Button.

6. Maintenance

• Clean the speaker with a soft, dry cloth. Do not use abrasive cleaners or solvents.
• Avoid exposing the speaker to extreme temperatures, direct sunlight, or high humidity.
• Store the speaker in a cool, dry place when not in use for extended periods.
• Do not attempt to disassemble or repair the speaker yourself, as this will void the warranty and may cause damage.

7. Troubleshooting

8. Specifications