1. Introduction
This manual provides detailed instructions for the installation, operation, and maintenance of your Abask Dash Cam Q40S. Please read this manual thoroughly before using the device to ensure proper functionality and to maximize your driving safety and recording experience.
Figure 1.1: Abask Dash Cam Q40S main unit, rear camera, and included 32GB MicroSD card.
2. Product Overview and Features
The Abask Dash Cam Q40S is designed to provide reliable video surveillance for your vehicle, offering both front and rear recording capabilities. Key features include:
- Full HD 1080P Recording: Captures clear video footage from both front and rear cameras.
- 4-inch IPS Screen: Provides a clear display for easy menu navigation and real-time viewing.
- Wide-Angle Lenses: Front camera with 170° wide-angle and rear camera with 140° lens for comprehensive coverage.
- WDR Technology: Wide Dynamic Range adjusts light conditions for optimal video quality day and night.
- G-Sensor: Automatically locks and saves video footage during collisions.
- Loop Recording: Overwrites the oldest unlocked files to ensure continuous recording.
- Parking Mode & Motion Detection: Monitors your vehicle for impacts or movement when parked.
- Night Vision: Enhanced low-light performance for clear recordings in dark conditions.
Figure 2.1: Key features and components of the Abask Dash Cam Q40S.
Figure 2.2: Illustration of the dash cam's night vision capabilities with WDR technology.
Figure 2.3: The four available display modes for viewing front and rear camera footage.
3. Package Contents
Please verify that all items listed below are included in your package:
- 1 x Main Dash Cam Unit
- 1 x Rear Camera with Cable (6M)
- 1 x Car Charger (3.5M)
- 1 x USB Cable (0.6M)
- 1 x Suction Cup Mount
- 1 x User Manual
- 1 x Double-sided Tape
- 2 x Screws
Figure 3.1: Contents of the Abask Dash Cam Q40S package.
4. Setup and Installation
Follow these steps to properly install your Abask Dash Cam Q40S:
- Prepare Memory Card: Insert a MicroSD card (Class 10 or higher, up to 32GB recommended, not included) into the main dash cam unit. Format the card within the dash cam's settings menu before first use.
- Mount Main Dash Cam: Attach the main dash cam unit to your front windshield using the suction cup mount. Position it near the center of the windshield, ensuring it does not obstruct your view.
- Connect Power: Plug the car charger into your vehicle's cigarette lighter socket. Connect the other end to the main dash cam unit. The camera will automatically power on/off with your vehicle's ignition.
- Install Rear Camera:
- Method 1 (Inside Vehicle): Attach the rear camera to the inside of your rear windshield using the double-sided tape.
- Method 2 (Outside Vehicle): Install the rear camera near your license plate using the provided screws and double-sided tape.
- Connect for Reversing View (Optional): If you desire a reversing view with parking grid lines, connect the red wire from the rear camera cable to the positive pole of your vehicle's reversing lamp. This will automatically display the rear view when reverse gear is engaged.
Figure 4.1: Installation diagram for the main and rear cameras.
Figure 4.2: Reversing view display with parking grid lines.
5. Operating Instructions
5.1 Power On/Off
- Automatic: The dash cam will automatically power on and begin recording when your vehicle's ignition is turned on. It will power off automatically when the ignition is turned off.
- Manual: Press and hold the power button to manually turn the device on or off.
5.2 Recording Modes
- Normal Recording: The dash cam continuously records video in segments (e.g., 1, 3, or 5 minutes) and saves them to the MicroSD card.
- Emergency Recording (G-Sensor): In the event of a sudden impact or collision, the built-in G-Sensor will automatically detect the event and lock the current video segment, preventing it from being overwritten by loop recording.
- Parking Mode Recording: When enabled, the dash cam will automatically start recording if motion is detected or an impact occurs while the vehicle is parked. This feature requires a continuous power supply (e.g., hardwiring kit, not included).
Figure 5.1: G-Sensor and Loop Recording functionality.
Figure 5.2: Motion Detection and Parking Monitor in action.
6. Function Settings
Access the menu settings on your dash cam to customize the following functions:
- Loop Recording: Sets the duration of video segments (e.g., 1 minute, 3 minutes, 5 minutes). When the memory card is full, the oldest unlocked files will be overwritten.
- G-Sensor: Adjusts the sensitivity of the G-Sensor (Off/Low/Medium/High). A higher sensitivity will trigger emergency recording more easily.
- Parking Protection: Enables or disables the parking monitoring feature. When enabled, the camera will record if an impact is detected while parked.
- Motion Detection: Activates recording when movement is detected in front of the camera while parked.
- Audio Recording: Toggles audio recording on or off.
- Date Stamp: Enables or disables the display of date and time on recorded videos.
- Screen Protection: Sets the time after which the screen will turn off automatically (e.g., 30 seconds, 1 minute, 2 minutes) to avoid distraction while driving. Recording continues in the background.
- Auto Shut-off: Configures the time after which the device will automatically power off if no operation is detected (e.g., 1 minute, 3 minutes, 5 minutes).
7. Maintenance
- Clean Lenses: Regularly clean the camera lenses with a soft, lint-free cloth to ensure clear video quality.
- Format Memory Card: Format the MicroSD card periodically (e.g., once a month) to prevent data corruption and ensure optimal recording performance. Back up any important files before formatting.
- Temperature: Avoid exposing the dash cam to extreme temperatures, which can affect battery life and device performance.
- Firmware Updates: Check the manufacturer's website for any available firmware updates to improve performance and add new features.
8. Troubleshooting
| Problem | Possible Solution |
|---|---|
| Dash cam does not power on. |
|
| Recording stops or freezes. |
|
| Video footage is blurry or unclear. |
|
| Rear camera not displaying. |
|
| Parking Mode/Motion Detection not working. |
|
9. Specifications
| Brand | Abask |
| Model | Q40S |
| Front Camera Resolution | 1920 x 1080P (Full HD) |
| Rear Camera Resolution | 720 x 480P |
| Screen Size | 4 Inches IPS |
| Front Camera Angle | 170 Degrees |
| Rear Camera Angle | 140 Degrees |
| Storage | MicroSD, up to 32GB (Class 10 recommended) |
| Voltage | 5 Volts |
| Dimensions (Main Unit) | 11 x 1.2 x 6 cm |
| Weight (Main Unit) | 106.4 g |
| Special Features | WDR, G-Sensor, Loop Recording, Parking Mode, Motion Detection, Night Vision |
10. Warranty and Support
Abask provides a 12-month warranty from the date of purchase for the Dash Cam Q40S. If you encounter any issues or have questions regarding your product, please contact Abask customer support. We aim to respond within 24 hours and provide a satisfactory solution.
For support, please refer to the contact information provided on the product packaging or the official Abask website.
