Simple Designs LF1015-TAN Three Shelf Etagere Floor Lamp with Wine Rack Instruction Manual

Introduction

This manual provides comprehensive instructions for the assembly, operation, and maintenance of your Simple Designs LF1015-TAN Three Shelf Etagere Floor Lamp with Wine Rack. This versatile unit combines a lighting fixture with practical storage, featuring three shelves, a wine rack, and a stemware holder, all encased in a tan finish with a white linen shade. Please read this manual thoroughly before use to ensure safe and efficient operation.

Safety Information

Always follow basic safety precautions when using electrical appliances to reduce the risk of fire, electric shock, and personal injury.

• Ensure the lamp is unplugged before assembly, cleaning, or replacing the bulb.
• Use only the specified bulb type and wattage (1 x 100-Watt equivalent Type A medium base bulb, not included).
• Do not operate the lamp with a damaged cord or plug.
• Keep cords away from heat, sharp edges, and moving parts.
• Place the lamp on a stable, level surface to prevent tipping.
• Do not overload the shelves or wine rack beyond their intended capacity.
• Keep small children and pets away from the lamp, especially during operation and if cords are exposed.

Package Contents

Verify that all components are present before beginning assembly:

• Lamp Frame (Tan finish)
• White Linen Lamp Shade
• Shelves (3)
• Wine Rack (integrated)
• Stemware Holder (integrated)
• Light Socket with Pull Chain Switch
• Assembly Hardware (screws, connectors, etc.)
• Power Cord with Cord Clips

Figure 1: Exploded view of the Simple Designs LF1015-TAN Floor Lamp, showing individual components including the frame, shelves, wine rack, and lamp shade.

Setup and Assembly

Assembly is required. Follow these general steps. Refer to the included diagram for specific part identification.

1. Unpack all components and lay them out on a clean, soft surface to prevent scratches.
2. Assemble the main frame structure by connecting the vertical posts and horizontal supports using the provided hardware. Ensure all connections are secure.
3. Insert the shelves into their designated positions within the frame. The wine rack and stemware holder are typically integrated into specific shelf levels.
4. Attach the lamp shade to the top section of the frame, ensuring it is securely fastened.
5. Install the light bulb (1 x 100-Watt equivalent Type A medium base bulb, not included) into the socket.
6. Route the power cord along the back of the lamp frame using the provided cord clips to keep it tidy and secure.
7. Place the assembled lamp in its desired location, ensuring it is stable and near a power outlet.

Figure 2: Detail of the lamp socket with the pull chain switch for easy operation.

Figure 3: Detail of the integrated stemware holder, designed to securely hold wine glasses.

Figure 4: Detail of the integrated wine bottle rack, capable of holding multiple bottles securely.

Operating Instructions

• Turning On/Off: The lamp is operated by a convenient pull chain switch located directly under the shade. Pull the chain once to turn the light on, and pull it again to turn it off.
• Using the Shelves: The three shelves can be used to display decorative items, books, or other small objects. Ensure items are placed securely and do not exceed the shelf's weight capacity.
• Using the Wine Rack: The integrated wine rack at the base is designed to hold up to eight standard wine bottles. Place bottles carefully to ensure stability.
• Using the Stemware Holder: The middle shelf features a stemware holder for hanging wine glasses. Hang glasses upside down to keep them clean and easily accessible.

Maintenance

• Cleaning: Dust the lamp frame and shelves regularly with a soft, dry cloth. For the linen shade, use a lint roller or a soft brush to remove dust. Do not use abrasive cleaners or solvents.
• Bulb Replacement: Always unplug the lamp before replacing the bulb. Allow the old bulb to cool completely. Replace with a 100-Watt equivalent Type A medium base bulb.
• Cord Care: Periodically check the power cord for any signs of damage. Ensure it remains securely fastened with the cord clips to prevent tripping hazards or damage.

Troubleshooting

• Light Does Not Turn On:
  • Check if the lamp is properly plugged into a working outlet.
  • Ensure the light bulb is securely screwed into the socket.
  • Replace the light bulb with a new one to rule out a burnt-out bulb.
  • Verify the pull chain switch is functioning correctly.
• Lamp is Unstable:
  • Ensure all assembly screws and connections are tightened.
  • Place the lamp on a flat, level surface.
  • Distribute items on the shelves evenly to maintain balance.

Specifications

Warranty and Support

For warranty information or technical support, please refer to the product packaging or contact Simple Designs customer service directly. Keep your purchase receipt for warranty claims.