Sitecom CH-001 Wireless Charging Pad User Manual

Introduction

This manual provides essential instructions for the safe and efficient use of your Sitecom CH-001 Wireless Charging Pad. Please read this manual thoroughly before using the device and keep it for future reference. The Sitecom CH-001 is designed to wirelessly charge Qi-compatible smartphones at 5W, 7.5W, or 10W speeds, offering a convenient and cable-free charging experience.

Product Overview

The Sitecom CH-001 Wireless Charging Pad is a compact and efficient device for charging your Qi-compatible smartphone. It features a non-slip surface to keep your device secure during charging and an LED indicator for charging status.

Sitecom CH-001 Wireless Charging Pad with glowing rings indicating wireless charging

Figure 1: The Sitecom CH-001 Wireless Charging Pad, illustrating its sleek design and the wireless charging area with subtle glowing rings.

What's Included:

Sitecom CH-001 Wireless Charging Pad
Micro-USB cable (0.8 m, USB-A to Micro-B)

What You Need:

Qi-compatible smartphone
USB wall charger:
- For standard 5W charging: 10W (5V/2A) USB wall charger
- For fast 7.5W/10W charging: Adaptive Fast Charge or Quick Charge 2.0 (or higher) USB wall charger (9V/1.8A)

Setup

Follow these steps to set up your Sitecom CH-001 Wireless Charging Pad:

Connect the Micro-USB Cable: Insert the Micro-USB end of the included cable into the Micro-USB port on the charging pad.

Underside view of the Sitecom CH-001 Wireless Charging Pad showing the Micro-USB port

Figure 2: The Micro-USB port located on the side of the charging pad for power input.

Connect to Power: Plug the USB-A end of the cable into a compatible USB wall charger (not included). Ensure the wall charger meets the power requirements for your desired charging speed (5V/2A for standard, 9V/1.8A for fast charging).
Plug into Wall Outlet: Insert the USB wall charger into a power outlet. The charging pad is now ready for use.

Operating Instructions

Using the Sitecom CH-001 Wireless Charging Pad is straightforward:

Place Your Smartphone: Gently place your Qi-compatible smartphone directly onto the center of the charging pad. The non-slip surface will help keep your phone in place.

Smartphone placed on the Sitecom CH-001 Wireless Charging Pad, showing charging indicator on phone screen

Figure 3: A smartphone positioned on the charging pad, indicating active wireless charging.

Verify Charging: The LED indicator on the charging pad will illuminate, and your smartphone's screen should show that it is charging. The pad automatically detects your device and delivers the optimal charging power (5W, 7.5W, or 10W).

Side view of a smartphone charging wirelessly on the Sitecom CH-001 pad

Figure 4: Side profile of a smartphone resting on the Sitecom CH-001 Wireless Charging Pad during charging.

Charging with Phone Cases: The charger supports charging through most phone cases up to 3mm thick. Cases with magnetic components or excessive thickness may interfere with wireless charging. Remove such cases if charging issues occur.
Charging Completion: Once your smartphone is fully charged, the charging pad will stop delivering power. You can remove your phone at any time.

Maintenance

To ensure the longevity and optimal performance of your Sitecom CH-001 Wireless Charging Pad, follow these maintenance guidelines:

Cleaning: Disconnect the charging pad from the power source before cleaning. Use a soft, dry, or slightly damp cloth to wipe the surface. Do not use harsh chemicals, abrasive cleaners, or immerse the device in water.
Storage: When not in use, store the charging pad in a cool, dry place away from direct sunlight and extreme temperatures.
Handling: Avoid dropping the device or subjecting it to strong impacts. Do not attempt to disassemble or modify the charging pad, as this will void the warranty and could cause damage.

Troubleshooting

If you encounter issues with your Sitecom CH-001 Wireless Charging Pad, refer to the following common problems and solutions:

Problem	Possible Cause	Solution
Phone not charging or charging slowly.	Phone not properly aligned on the pad. Phone case is too thick or contains metal/magnets. USB wall charger is not powerful enough. Foreign object detected on the pad. Phone is not Qi-compatible.	Reposition the phone to the center of the pad. Remove the phone case or use a thinner, non-metallic case. Ensure you are using a 5V/2A (10W) or 9V/1.8A (Fast Charge) USB wall charger. Remove any objects (keys, coins, cards) from the charging pad. Verify your smartphone supports Qi wireless charging.
LED indicator is off.	Charging pad is not receiving power. Phone is not placed correctly.	Check all cable connections and ensure the wall charger is plugged into a live outlet. Reposition the phone on the pad.
Charging pad gets warm.	Normal operation during wireless charging. Poor phone alignment or foreign object.	Slight warmth is normal. Ensure proper phone alignment and remove any foreign objects. If it becomes excessively hot, discontinue use and contact support.

Specifications

Feature	Detail
Model Number	CH-001
Brand	Sitecom
Wireless Standard	Qi Certified (Version 1.2.4)
Input	Micro-USB: 5V/2A, 9V/1.8A
Wireless Output Modes	5W, 7.5W, 10W
Charging Distance	≤ 10mm (charges through cases up to 3mm thick)
Special Features	Overcurrent protection, Overcharge protection, Short-circuit protection, Foreign object detection, Thermal protection
Compatible Devices	Qi-compatible mobile phones
Included Components	Wireless Charging Pad, Micro-USB cable (0.8m, USB-A to Micro-B)

Warranty Information

Sitecom products are designed and manufactured to the highest quality standards. For detailed warranty information, including terms and conditions, please refer to the official Sitecom website or the warranty card included with your purchase. Keep your proof of purchase for warranty claims.

Support

If you require further assistance or have questions not covered in this manual, please visit the official Sitecom support website or contact their customer service. You can typically find contact details on the Sitecom website or on the product packaging.

Website: www.sitecom.com/support (Example link, please verify actual URL)

	Sitecom MD-1012 USB-A + USB-C Stick Card Reader User Manual User manual for the Sitecom MD-1012 USB-A + USB-C Stick Card Reader with USB port, detailing its features, specifications, safety instructions, and compliance information.
	Sitecom Magnetic Wireless Charging Pad AWCH-3001 User Manual User manual and specifications for the Sitecom AWCH-3001 Magnetic Wireless Charging Pad. Learn how to use, safety instructions, technical details, and conformity information.
	SITECOM CN-5015 USB-C Hub: User Manual, Specs & Features \| 10Gbps Power Delivery Comprehensive user manual for the SITECOM CN-5015 USB-C to 4x USB-C 10Gbps Power Delivery Hub. Find detailed specifications, connection guides, safety instructions, and support information.
	Sitecom CH-2019 65W Universal Notebook Charger User Manual User manual for the Sitecom CH-2019 65W Universal Notebook Charger, providing specifications, safety instructions, and support information for this versatile power adapter.
	SITECOM WLR-5002 AC750 Wi-Fi Router User Manual User manual for the SITECOM WLR-5002 AC750 Wi-Fi Router, covering setup, configuration, wireless settings, firewall, and advanced features.
	Sitecom WLX-7000 AC1200 Wi-Fi Dual-band Access Point User Manual Comprehensive guide for the Sitecom WLX-7000 AC1200 Wi-Fi Dual-band Access Point, covering setup, configuration, features, and troubleshooting. Enhance your home network with faster speeds and extended range.

Sitecom CH-001