1. Introduction
This manual provides instructions for the Skar Audio SKAR2CH-RCA17 17-foot 2-channel twisted pair RCA interconnect cable. This cable is designed for high-quality audio signal transfer in various audio systems.
Key Features:
- 17-foot length, 2-channel audiophile-grade RCA interconnect cable.
- Constructed with 99.99% Oxygen Free Multi-Strand Copper Wire for optimal conductivity.
- Features Twisted Pair Technology to minimize noise and maximize signal transfer.
- Precision machined, color-coded metal ends (Red & White band identifiers) for easy identification and secure connection.
- Matte blue finish with a Max Flex Jacket for enhanced wire flexibility and durability.
2. What's in the Box
The package for the Skar Audio SKAR2CH-RCA17 includes:
- One (1) Skar Audio SKAR2CH-RCA17 17-Foot 2-Channel Twisted Pair RCA Interconnect Cable.
3. Setup Instructions
Follow these steps to properly connect your Skar Audio RCA interconnect cable:
- Identify Components: Locate the RCA output jacks on your audio source (e.g., head unit, receiver) and the RCA input jacks on your amplifier or other audio component. Ensure both devices are powered off before making connections.
- Connect to Source: Plug one end of the Skar Audio RCA cable into the corresponding output jacks of your audio source. The cable features precision machined, color-coded metal ends (red and white bands). Typically, red indicates the right channel and white indicates the left channel.
- Route the Cable: Carefully route the 17-foot cable from your audio source to your amplifier or destination component. Avoid routing the RCA cable parallel to power cables, as this can introduce noise. Cross power cables at a 90-degree angle if necessary. The Max Flex Jacket allows for easy routing.
- Connect to Destination: Plug the other end of the Skar Audio RCA cable into the corresponding input jacks of your amplifier or destination component, matching the red and white color codes for right and left channels respectively. Ensure connections are firm and secure.
- Verify Connections: Double-check all connections to ensure they are fully seated and correctly matched. Loose connections can lead to signal loss or intermittent audio.
4. Operating the Cable
The Skar Audio SKAR2CH-RCA17 cable is a passive component designed to transmit audio signals. Once properly connected between your audio source and amplifier/component, it operates automatically. Ensure that both the audio source and the receiving component are powered on and configured correctly for audio output and input, respectively. The cable's twisted pair technology and oxygen-free copper construction work to deliver a clean, high-fidelity signal.
5. Maintenance and Care
To ensure the longevity and optimal performance of your Skar Audio RCA interconnect cable, follow these maintenance guidelines:
- Cleaning: Use a soft, dry cloth to wipe down the cable and connectors. Avoid using harsh chemicals or abrasive cleaners, which can damage the jacket or plating.
- Storage: When not in use, coil the cable loosely to prevent kinks and damage. Store it in a clean, dry environment away from extreme temperatures and direct sunlight.
- Handling: Always grasp the connector housing when plugging or unplugging the cable, rather than pulling on the cable itself. This prevents strain on the internal wiring and connections.
- Inspection: Periodically inspect the cable for any signs of wear, cuts, or damage to the jacket or connectors. Replace the cable if significant damage is observed to prevent potential audio issues.
6. Troubleshooting
If you experience issues with your audio system after installing the RCA cable, consider the following troubleshooting steps:
- No Sound:
- Ensure both the audio source and amplifier/component are powered on.
- Verify that the RCA cables are securely connected to the correct input/output jacks on both devices.
- Check the volume levels on all connected devices.
- Test with another known-good RCA cable if available, to rule out a cable issue.
- Humming or Buzzing Noise:
- Ensure the RCA cables are not routed too close to power cables or other sources of electromagnetic interference. Try rerouting the cable.
- Check for proper grounding of all audio components. A ground loop isolator may be necessary in some car audio installations.
- Verify that the RCA connectors are fully seated and making good contact. Loose connections can introduce noise.
- Intermittent Audio:
- Inspect the cable and connectors for any physical damage.
- Ensure all connections are tight and secure.
7. Specifications
Detailed technical specifications for the Skar Audio SKAR2CH-RCA17 cable:
| Feature | Specification |
|---|---|
| Brand | Skar Audio |
| Model Name | SKAR2CH-RCA17 |
| Connector Type | RCA |
| Cable Type | Composite |
| Compatible Devices | Most devices with RCA inputs or outputs (audio systems, home theaters) |
| Special Feature | Tangle Free, Twisted Pair Technology |
| Connector Gender | Male-to-Male |
| Number of Pins | 2 |
| Indoor/Outdoor Usage | Indoor, Outdoor |
| Unit Count | 17.0 Feet |
| Item Weight | 6.24 ounces |
| Color | Blue, Red, White |
| Outer Material | Max Flex Jacket |
| Manufacturer | Skar Audio |
| UPC | 655036034828 |
8. Warranty and Support
Warranty Information:
The Skar Audio SKAR2CH-RCA17 cable comes with a 2-year limited warranty. This warranty covers defects in materials and workmanship under normal use. Please retain your proof of purchase for warranty claims.
Customer Support:
For technical assistance, warranty claims, or general inquiries, please contact Skar Audio customer support through their official website or the retailer where the product was purchased. Visit www.skaraudio.com for more information.