1. Introduction
This manual provides instructions for the safe and efficient use of your Sunny-room Battery Charger. This charger is designed to power lithium-ion camera battery packs ranging from 7.2V to 8.0V. It features both AC wall and DC car charging capabilities, making it suitable for various charging environments.
The charger incorporates constant current control to prevent over-voltage, over-charging, and short-circuit conditions, ensuring the safety of your batteries.
2. Safety Information
Please read and understand all safety instructions before using the charger. Failure to follow these instructions may result in electric shock, fire, or damage to the product.
- To prevent fire or moisture exposure, keep the charger in a dry location.
- To reduce the risk of electric shock, do not remove the cover or back plate of the charger. There are no user-serviceable parts inside. Refer all servicing to qualified service personnel.
- Do not disassemble the unit.
- Ensure the charger is used only with compatible battery models as listed in this manual. Using incompatible batteries may cause damage or safety hazards.
- Avoid exposing the charger to extreme temperatures, direct sunlight, or corrosive environments.
3. Package Contents
Verify that all items are present in the package:
- 1x Wall Charger (with fold-out US plug)
- 1x Car Charger Cable
- 1x EU Plug Adapter
4. Setup
Follow these steps to prepare your charger for use:
- Insert Battery: Align the battery with the charging slot on the charger. Gently push the battery into the slot until it is securely seated.
Image: Proper insertion of a battery into the charging unit.
- Connect to Power Source:
- For Wall Charging: Fold out the US plug from the charger body and plug it directly into a standard AC 100V-240V wall outlet. If an EU outlet is required, attach the provided EU plug adapter before plugging into the wall.
- For Car Charging: Connect the car charger cable to the charger's DC input port. Then, insert the other end of the car charger cable into your vehicle's 12V DC accessory socket (cigarette lighter port).
Image: The battery charger connected to a vehicle's 12V DC power outlet for car charging.
5. Operating Instructions
Once the battery is inserted and the charger is connected to a power source, the charging process will begin automatically.
- LED Indicator: The charger features an LED indicator to display the charging status.
- When the battery is charging, the LED indicator will illuminate red.
- When the battery is fully charged, the LED indicator will turn green.
- Charging Time: The typical charging time for a fully depleted battery is approximately 1 to 4 hours. Actual charging time may vary depending on the battery's capacity and current charge level.
- Important Note: This charger is designed exclusively for charging camera batteries. It cannot be used to directly power or charge a camera or camcorder.
Image: The LED indicator displaying red for 'Charging' and green for 'Fully Charged'.
6. Maintenance
Proper maintenance ensures the longevity and optimal performance of your charger:
- Keep the charger clean and dry. Avoid using liquid cleaners; wipe with a soft, dry cloth.
- Store the charger in a cool, dry place away from direct sunlight and extreme temperatures when not in use.
- Regularly inspect the charger and cables for any signs of damage. If damage is found, discontinue use and contact support.
7. Troubleshooting
If you encounter issues with your charger, refer to the following common problems and solutions:
- Charger Not Powering On / LED Not Illuminating:
- Ensure the charger is securely plugged into a functional power outlet (wall or car).
- Verify that the power outlet itself is active. Try plugging in another device.
- Check the car charger cable for any damage or loose connections if using in a vehicle.
- Battery Not Charging / LED Remains Red Indefinitely:
- Ensure the battery is correctly inserted into the charger slot and makes proper contact.
- Confirm that the battery is compatible with this charger (refer to Section 9: Compatible Battery Models).
- The battery itself may be faulty or at the end of its lifespan. Try charging a different, known-good battery if available.
- General Compatibility Issues:
- Incorrect battery purchase will result in unusable equipment. Always double-confirm the specific model of your camera or battery before purchase.
- If you are unsure about battery or charger compatibility, please contact the seller or manufacturer for assistance.
8. Specifications
- Input: AC 100V-240V, Max 150mA, 50/60Hz
- Output: DC 8.4V, 600mA (for 7.2V-8.0V Lithium-ion Camera Battery Packs)
- Product Dimensions: 3.35 x 1.85 x 1.38 inches (85 x 47 x 41 mm)
- Item Weight: 2.46 ounces (0.07 Kilograms)
- Charging Time: 1 to 4 Hours (approximate)
- Safety Certifications: CE, FCC
Image: Front view of the charger detailing input and output specifications.
Image: Side view of the charger detailing input and output specifications.
9. Compatible Battery Models
This charger is compatible with the following Panasonic battery models:
- Panasonic CGA-D07SE/1B, CGR-D08SE/1B, CGR-D14SE/1B, CGR-D16SE/1B, CGP-D28SE/1B
- Panasonic CGP-D110A/1B, CGR-D120A/1B, CGR-D210A/1B, CGR-D220A/1B, CGR-D320A/1B
- Panasonic CGP-D110, CGR-D120, CGR-D210, CGR-D220, CGR-D320
- Panasonic CGA-D07S, CGR-D08S, CGP-D14S, CGR-D16S, CGP-D28S
- Panasonic CGA-D07, CGR-D08, CGR-D08R, CGR-D14, CGR-D16, CGP-D28
- Panasonic PV-DBP8, PV-DBP8A, PV-DBP9, PV-DBP9A
- Panasonic CGA-D54, CGA-D54S, CGA-D54S-1H, CGA-D54SE/1B
- Panasonic CGR-D815, CGR-D53, CGR-D53S, CGR-D53A/1B, CGR-D53A/1K
- Panasonic CGR-D08A/1B, CGR-D14A/1B, CGR-D16A/1B, CGP-D28A/1B
- Panasonic AG-B23, VW-VBD29, VW-VBD55, VW-VBD58, VW-VBD78, AG-VBR59, AG-VBR89G, AG-VBR118G
10. Warranty and Support
For information regarding warranty coverage, technical support, or any product-related inquiries, please contact the seller or manufacturer directly. Refer to your purchase documentation for specific contact details.
