Xitomer Fender Eliminator Bracket with LED License Plate Light for Suzuki GSXR 600/750 (2011-2025) Instruction Manual

1. Introduction

This manual provides comprehensive instructions for the installation, operation, and maintenance of your Xitomer Fender Eliminator Bracket with LED License Plate Light. Designed for Suzuki GSXR 600 and GSXR 750 models from 2011 to 2025, this product offers a streamlined aesthetic for your motorcycle while maintaining essential license plate visibility.

2. Product Features

• Compatibility: Specifically designed for Suzuki GSXR 600 / GSXR 750 models from 2011 to 2025.
• Material: Constructed from durable 5083-H112 Aluminum Alloy with a 3.0mm thickness, featuring a black powder coating for enhanced longevity and corrosion resistance.
• Hardware: Includes all necessary 304 stainless steel hardware for secure installation.
• Integrated Lighting: Features an LED license plate light for improved visibility. Note: This product does not fit OEM license plate lights and requires wiring connection.

3. Package Contents

Verify that all components are present before beginning installation:

• Fender Eliminator Bracket (1)
• LED License Plate Light (1)
• Mounting Hardware (Bolts, Washers, Nuts) (Set)

Image: Contents of the Xitomer Fender Eliminator package, including the main bracket, LED light, and various bolts and washers.

Image: Detailed view of the fender eliminator bracket with dimensions (178mm/7.0inch length, 70mm/2.75inch width), showing the included LED light and accessories.

4. Setup and Installation

Installation requires basic mechanical skills and tools. Ensure the motorcycle is stable and powered off before beginning.

4.1. Preparation

1. Park your motorcycle on a level surface and ensure it is stable.
2. Turn off the ignition and disconnect the battery to prevent electrical shorts during wiring.
3. Identify and remove the existing factory fender and license plate assembly. This typically involves unscrewing mounting bolts and disconnecting any wiring for the original license plate light or turn signals.

4.2. Installing the LED License Plate Light

1. Attach the provided LED license plate light to the designated mounting points on the fender eliminator bracket using the small screws.
2. Ensure the light is securely fastened and oriented correctly to illuminate the license plate.

4.3. Mounting the Fender Eliminator Bracket

1. Align the fender eliminator bracket with the mounting holes on your motorcycle's subframe, where the original fender was attached.
2. Secure the bracket using the supplied 304 stainless steel hardware. Tighten all bolts firmly but do not overtighten to avoid damaging threads.

4.4. Wiring the LED License Plate Light

1. The LED license plate light requires connection to your motorcycle's electrical system. You will need to add some wires to connect the plugs.
2. Identify the appropriate power source (e.g., existing license plate light wiring or tail light wiring). Consult your motorcycle's service manual for wiring diagrams if unsure.
3. Connect the LED light's wires to the power source, ensuring correct polarity (positive to positive, negative to negative). Use appropriate electrical connectors (not included) and insulate all connections to prevent shorts and corrosion.
4. Route the wiring safely, away from moving parts and heat sources, securing it with zip ties if necessary.

4.5. Adjusting the Bracket Angle

The bracket allows for angle adjustment to suit your preference and local regulations.

1. Loosen the adjustment bolts on the bracket.
2. Adjust the angle of the license plate to the desired position.
3. Tighten the adjustment bolts securely to lock the angle in place.

Images: Before and after views of the fender eliminator installation, demonstrating the improved aesthetic and visibility.

5. Operating Instructions

Once installed and wired correctly, the LED license plate light will activate with your motorcycle's tail light or when the designated circuit is powered. Ensure the license plate is clearly visible and illuminated according to local traffic laws.

6. Maintenance

• Regular Inspection: Periodically check all mounting bolts for tightness. Vibrations from motorcycle operation can cause fasteners to loosen over time.
• Cleaning: Clean the bracket and LED light with a soft cloth and mild soap and water. Avoid abrasive cleaners or solvents that could damage the finish or electrical components.
• Wiring Check: Inspect wiring connections for any signs of wear, corrosion, or damage. Repair or replace as necessary.

7. Troubleshooting

8. Specifications

9. Warranty and Support

Xitomer products are manufactured to high-quality standards. For specific warranty information or technical support, please refer to the product packaging or contact Xitomer customer service directly through their official channels. Keep your purchase receipt for warranty claims.