Product Overview
The JBL GO2 is a full-featured waterproof Bluetooth speaker designed to be taken anywhere. It allows you to wirelessly stream music via Bluetooth for up to 5 hours of continuous JBL quality sound. Featuring an IPX7 waterproof design, the GO2 is ideal for use by the poolside or at the beach. It also includes a built-in noise-cancelling speakerphone for crystal clear phone calls. The compact design and variety of colors make the GO2 a stylish and functional audio companion.
Key Features:
- Wireless Bluetooth Streaming
- Up to 5 hours of playtime
- IPX7 waterproof rating
- Integrated speakerphone for calls
- Audio Cable Input for wired connections
Figure 1: Front view of the JBL GO2 speaker in Cyan.
Setup
Before using your JBL GO2 speaker, please ensure it is fully charged. The package includes the speaker, a Micro USB Cable, and a Quick Start Guide.
Charging the Battery:
- Locate the Micro USB port on the side of the speaker, protected by a waterproof flap.
- Open the flap and connect the supplied Micro USB cable to the speaker's charging port.
- Connect the other end of the USB cable to a USB power adapter (not included) or a computer's USB port.
- The LED indicator on the speaker will illuminate to show charging status. A full charge takes approximately 2.5 hours.
Note: The speaker can be used while charging.
Figure 2: Side view of the JBL GO2, showing the Micro USB charging port and 3.5mm audio input under the protective flap.
Operating Instructions
Power On/Off:
- Press the Power button (circle icon) located on the top of the speaker to turn it on or off.
Bluetooth Pairing:
- With the speaker powered on, press the Bluetooth button (Bluetooth logo icon) on the top of the speaker. The LED indicator will flash blue, indicating it is in pairing mode.
- On your Bluetooth-enabled device (smartphone, tablet, computer), go to the Bluetooth settings and search for available devices.
- Select "JBL GO2" from the list of devices.
- Once connected, the LED indicator will turn solid blue. You can now stream audio wirelessly to your speaker.
Music Playback and Volume Control:
- Use the Play/Pause button (triangle icon) to play or pause music.
- Press the Volume Up button (+) to increase volume.
- Press the Volume Down button (-) to decrease volume.
Speakerphone Functionality:
- When a call comes in, press the Play/Pause button to answer the call.
- Press the Play/Pause button again to end the call.
- Press and hold the Play/Pause button to reject an incoming call.
Using the Audio Cable Input:
- Open the waterproof flap on the side of the speaker.
- Connect a 3.5mm audio cable (not included) from your audio source to the AUX input port on the speaker.
- The speaker will automatically switch to AUX mode when a cable is detected.
Figure 3: Top view of the JBL GO2, highlighting the power, Bluetooth, volume, and play/pause/speakerphone buttons.
Maintenance
Proper care and maintenance will ensure the longevity and optimal performance of your JBL GO2 speaker.
Cleaning:
- Wipe the speaker with a soft, damp cloth. Do not use abrasive cleaners or solvents.
- Ensure the charging port and AUX input are dry before closing the waterproof flap.
Waterproof Care (IPX7):
- The JBL GO2 is IPX7 waterproof, meaning it can be immersed in water up to 1 meter (3.3 feet) for up to 30 minutes.
- Always ensure the waterproof flap covering the charging and AUX ports is securely closed before exposing the speaker to water.
- Do not expose the speaker to salt water or other liquids besides fresh water. If exposed, rinse with fresh water and dry thoroughly.
Battery Care:
- To preserve battery life, fully charge the speaker at least once every 3 months if not in regular use.
- Avoid exposing the speaker to extreme temperatures (hot or cold) as this can affect battery performance.
Troubleshooting
If you encounter issues with your JBL GO2 speaker, refer to the following common problems and solutions. For more detailed troubleshooting, please consult the official Troubleshooting Guide PDF available online.
No Power:
- Ensure the battery is charged. Connect the speaker to a power source using the Micro USB cable.
- Press and hold the Power button for a few seconds to ensure it's not just a quick press.
No Sound:
- Check the volume level on both the speaker and your connected device.
- Ensure the speaker is properly paired via Bluetooth or the audio cable is securely connected.
- If using Bluetooth, try disconnecting and re-pairing the device.
Bluetooth Pairing Issues:
- Make sure the speaker is in pairing mode (flashing blue LED).
- Ensure your device's Bluetooth is enabled and within range (up to 10 meters).
- Forget "JBL GO2" from your device's Bluetooth settings and try pairing again.
- Turn off other Bluetooth devices nearby to avoid interference.
For further assistance, you may refer to the official JBL GO2 Troubleshooting Guide (PDF).
Specifications
| Feature | Specification |
|---|---|
| Model Name | JBL GO 2 - Cyan |
| Dimensions (D x W x H) | 4.21" x 1.45" x 3.8" |
| Item Weight | 0.41 Pounds (6.6 ounces) |
| Battery Life | Up to 5 Hours |
| Charging Time | Approx. 2.5 Hours |
| Bluetooth Range | Up to 10 Meters |
| Speaker Maximum Output Power | 3 Watts |
| Water Resistance Level | IPX7 (Waterproof) |
| Connectivity Technology | Bluetooth, 3.5mm Audio Cable |
| Included Components | Speaker, Micro USB Cable, Quick Start Guide |
Warranty and Support
Your JBL GO2 speaker comes with a limited warranty. Please refer to the warranty card included in your product packaging for specific terms and conditions. For general inquiries, product support, or to download the full user manual, please visit the official JBL website or contact JBL customer service.
A comprehensive JBL GO2 User Manual (PDF) is available for download.
No relevant official product videos were found based on the provided metadata for embedding in this manual.
