Brentwood MC-109W 1.5 Cup Mini Food Chopper User Manual

1. Introduction

Thank you for purchasing the Brentwood MC-109W 1.5 Cup Mini Food Chopper. This compact and efficient appliance is designed to simplify your food preparation tasks, allowing you to quickly chop ingredients for various recipes. Please read this manual thoroughly before first use to ensure safe and optimal operation.

The Brentwood MC-109W features a 100-watt motor, durable stainless steel blades, and a safety lock bowl for secure operation. Its compact design makes it ideal for small kitchens and easy storage.

Image 1: The Brentwood MC-109W Mini Food Chopper, fully assembled and ready for use.

2. Important Safety Instructions

When using electrical appliances, basic safety precautions should always be followed to reduce the risk of fire, electric shock, and injury to persons, including the following:

• Read all instructions before operating the appliance.
• To protect against electrical hazards, do not immerse the motor base, cord, or plug in water or other liquids.
• Close supervision is necessary when any appliance is used by or near children.
• Unplug from outlet when not in use, before assembling or disassembling parts, and before cleaning.
• Avoid contact with moving parts. The blades are sharp. Handle with care.
• Do not operate any appliance with a damaged cord or plug, or after the appliance malfunctions or has been dropped or damaged in any manner.
• The use of attachments not recommended or sold by the manufacturer may cause fire, electric shock, or injury.
• Do not use outdoors.
• Do not let cord hang over edge of table or counter, or touch hot surfaces.
• Do not place on or near a hot gas or electric burner, or in a heated oven.
• Always ensure the lid is securely locked in place before operating the chopper.
• Do not attempt to defeat the safety interlock mechanism.

3. Parts Identification

Familiarize yourself with the components of your mini food chopper:

Image 2: Exploded view showing the motor base, chopping bowl, blade assembly, and lid.

1. Motor Base: Contains the motor and control switch.
2. Chopping Bowl: Transparent bowl for holding ingredients. Features measurement markings.
3. Blade Assembly: Stainless steel blades for chopping. Handle with extreme care.
4. Lid: Covers the chopping bowl and engages with the safety lock mechanism.

4. Setup and Assembly

Before first use, wash all removable parts (chopping bowl, blade assembly, lid) in warm, soapy water. Rinse thoroughly and dry. Wipe the motor base with a damp cloth.

1. Place the motor base on a clean, dry, and stable surface.
2. Carefully place the blade assembly onto the center shaft inside the chopping bowl. Ensure it sits firmly.
3. Add your ingredients to the chopping bowl. Do not overfill; ensure ingredients are below the MAX fill line.
4. Place the chopping bowl onto the motor base, aligning the tabs. Twist the bowl clockwise until it locks securely into place.
5. Place the lid onto the chopping bowl, aligning the lid's tab with the slot on the motor base. Twist the lid clockwise until it locks securely. The appliance will not operate unless the bowl and lid are correctly locked.

5. Operating Instructions

Once assembled and filled with ingredients:

1. Ensure the chopper is properly assembled with the bowl and lid securely locked.
2. Plug the power cord into a standard electrical outlet.
3. To operate, press and hold the 'On' switch located on the motor base. The blades will begin to rotate.

Image 3: Top view of the chopper, highlighting the 'On' and 'Off' switch positions.
4. Use short pulses for coarse chopping or hold for longer periods for finer results. Do not operate continuously for more than 30 seconds to prevent motor overheating. Allow a brief pause between pulses.
5. Once desired consistency is achieved, release the 'On' switch to turn off the appliance.
6. Unplug the chopper from the outlet.
7. Carefully twist the lid counter-clockwise to unlock and remove it.
8. Twist the chopping bowl counter-clockwise to unlock and remove it from the motor base.
9. Carefully remove the blade assembly before emptying the chopped ingredients.

Tips for Best Results:

• Cut large ingredients into smaller, uniform pieces (approx. 1-inch) before placing them in the bowl.
• Do not process hard items like coffee beans, ice, or frozen foods, as this can damage the blades and motor.
• For best results with herbs, ensure they are dry.

6. Cleaning and Maintenance

Proper cleaning and maintenance will extend the life of your mini food chopper.

1. Always unplug the appliance before cleaning.
2. Remove the lid, blade assembly, and chopping bowl.
3. Hand Wash Only: The chopping bowl, lid, and blade assembly are not dishwasher safe. Wash these parts in warm, soapy water. Rinse thoroughly and dry immediately to prevent water spots and rust on the blades.
4. Caution: The blades are extremely sharp. Handle the blade assembly with extreme care to avoid injury.
5. Wipe the motor base with a damp cloth. Do not immerse the motor base in water or any other liquid.
6. Ensure all parts are completely dry before reassembling or storing.
7. Store the chopper in a dry place, preferably with the blade assembly safely stored within the bowl.

7. Troubleshooting

If you encounter issues with your mini food chopper, refer to the following common problems and solutions:

8. Specifications

• Model: MC-109W
• Power: 100 Watts
• Capacity: 1.5 Cups
• Blade Material: Stainless Steel
• Color: White
• Product Dimensions: 8.25 x 5.5 x 6 inches
• Item Weight: 1.4 pounds
• Power Source: AC adapter
• Care Instructions: Hand Wash (removable parts)

9. Warranty and Support

For warranty information or customer support, please refer to the warranty card included with your purchase or visit the official Brentwood Appliances website. Do not attempt to repair the appliance yourself, as this may void the warranty and pose safety risks.