Product Overview
The Urmet 1130/11 is a classic 4-wire neutral intercom system designed for traditional call systems. It features a service button and is prepared for three additional independent keys, allowing for versatile applications such as operating staircase lights or controlling a secondary electric lock. This model is an ivory-colored replacement for the older 1130/1 model and is intended for indoor installation.
Figure 1: Front view of the Urmet 1130/11 intercom handset. This image shows the complete handset, highlighting its ergonomic design and the coiled cord connecting it to the base.
Package Contents
Upon opening the package, please verify that all components are present and undamaged. The standard package for the Urmet 1130/11 intercom typically includes:
- Urmet 1130/11 Intercom Handset (Ivory)
- Intercom Base Unit
- Mounting Screws and Wall Plugs
- User Manual (this document)
Figure 2: The Urmet 1130/11 intercom handset positioned next to its base unit. This view provides insight into the connection points and the overall structure of the device, useful for installation and maintenance.
Setup and Installation
The Urmet 1130/11 intercom is designed for straightforward indoor installation. It requires a 4-wire connection to your existing traditional call system. Professional installation is recommended for optimal performance and safety.
Safety Precautions:
- Always disconnect power to the intercom system before beginning installation or maintenance.
- Ensure all wiring is correctly connected according to the system's diagram to prevent damage or malfunction.
- Do not expose the unit to moisture or extreme temperatures.
Installation Steps:
- Preparation: Identify the location for the intercom unit. Ensure it is an indoor location, away from direct sunlight and moisture.
- Mounting the Base Unit: Use the provided screws and wall plugs to securely mount the intercom base unit to the wall. Ensure it is level.
- Wiring: Connect the 4-wire system cables to the designated terminals on the base unit. Refer to your building's intercom system wiring diagram for specific terminal assignments. Ensure all connections are secure.
- Handset Connection: Connect the coiled cord from the handset to the base unit.
- Testing: Once all connections are made, restore power to the intercom system. Test the call function, audio clarity, and any auxiliary functions (e.g., door release, staircase light control) if connected.
Figure 3: Side view of the Urmet 1130/11 intercom handset, demonstrating its mounted position. This image helps visualize the slim profile of the unit when installed.
Operating Instructions
The Urmet 1130/11 intercom is designed for simple and intuitive operation within a traditional intercom system.
Receiving a Call:
- When a visitor presses the call button at the entrance panel, the intercom unit will ring.
- Lift the handset from its cradle to answer the call and establish two-way communication.
- To end the call, simply place the handset back into its cradle.
Opening the Door (if connected):
- During an active conversation, press the dedicated door release button (usually marked with a key symbol) on the intercom unit to unlock the main entrance door.
Using Auxiliary Functions (if connected):
- The Urmet 1130/11 is equipped with a service button and can support up to three additional independent keys. These keys can be configured to control various functions such as staircase lighting, a secondary electric lock, or other compatible devices.
- Press the corresponding auxiliary button to activate its assigned function. Refer to your system installer for details on configured auxiliary functions.
Maintenance and Care
Proper maintenance ensures the longevity and optimal performance of your Urmet 1130/11 intercom.
- Cleaning: Clean the exterior of the intercom unit with a soft, dry cloth. For stubborn dirt, a slightly damp cloth with mild soap can be used, followed by drying. Do not use abrasive cleaners, solvents, or strong chemicals, as these can damage the plastic finish.
- Avoid Liquids: Do not spray liquids directly onto the unit or allow water to enter any openings.
- Environmental Conditions: Ensure the intercom is kept in a dry, indoor environment. Avoid exposing it to direct sunlight for prolonged periods or to extreme temperatures.
- Cord Care: Periodically check the coiled cord for any signs of wear or damage. Avoid excessive pulling or twisting of the cord.
Troubleshooting
This section provides solutions to common issues you might encounter with your Urmet 1130/11 intercom.
| Problem | Possible Cause | Solution |
|---|---|---|
| No sound from intercom / Cannot hear visitor |
|
|
| Visitor cannot hear me |
|
|
| Door release button not working |
|
|
| Intercom does not ring |
|
|
If the problem persists after attempting these solutions, please contact a qualified technician or your system installer for further assistance.
Specifications
| Feature | Detail |
|---|---|
| Brand | Urmet |
| Model Number | 1130/11 |
| Product Dimensions (L x W x H) | 22 x 8 x 6 cm |
| Item Weight | 400 grams |
| Color | Ivory (Ral 1013) |
| Phone Type | Wired |
| Material | Acrylonitrile Butadiene Styrene (ABS) |
| Power Source | Corded Electric |
| Dialer Phone Type | Single Keypad |
| Answering System Type | Digital |
| Multi-operation | Single-line operation |
| Caller ID | No |
| First Available Date | August 19, 2024 |
Warranty and Support
For warranty information, please refer to the terms and conditions provided by your retailer or the official Urmet website. Keep your purchase receipt as proof of purchase.
For technical support, installation queries, or service requests, please contact your local Urmet distributor or the professional installer who set up your intercom system. You may also find additional resources and contact information on the official Urmet website.
Note: This manual provides general guidelines. Specific wiring and system configurations may vary. Always consult a qualified professional for complex installations or repairs.
