Introduction
This manual provides detailed instructions for the safe and efficient assembly, operation, and maintenance of your Artemide Tolomeo Mega Floor Lamp. Please read this manual thoroughly before installation and retain it for future reference.
Important Safety Information
Always follow basic safety precautions when using electrical appliances to reduce the risk of fire, electric shock, and personal injury.
- Ensure the power supply is disconnected before assembly, disassembly, or cleaning.
- Do not operate the lamp with a damaged cord or plug.
- Use only the specified bulb type and wattage (E26, up to 150W incandescent or equivalent LED).
- Keep the lamp away from water and moisture.
- This lamp is designed for indoor use only.
- Do not attempt to modify the lamp in any way.
Setup and Assembly
The Artemide Tolomeo Mega Floor Lamp is designed for straightforward assembly. It typically arrives in multiple packages. Ensure all components are present before beginning.
- Unpack Components: Carefully remove all parts from the packaging. Verify that you have the base, main support stem, adjustable arm sections, shade, and any necessary fasteners. Refer to the packing list if provided.
- Assemble the Base and Stem: Attach the main support stem to the circular base. Ensure it is securely fastened.
- Attach Arm Sections: Connect the adjustable arm sections to the main stem and to each other, following the design of the lamp. The joints and tension control knobs should allow for smooth movement.
- Install the Shade: Secure the parchment diffuser shade to the lamp head.
- Insert the Bulb: Carefully screw an E26 base bulb (up to 150W incandescent or equivalent LED) into the lamp socket. Do not overtighten.
- Position the Lamp: Place the lamp on a stable, level surface.
- Connect to Power: Plug the power cord into a standard electrical outlet.
Note: Assembly may require minor adjustments to tension control knobs for optimal arm movement. Refer to the image below for a visual guide to the assembled lamp structure.
Figure 1: Fully assembled Artemide Tolomeo Mega Floor Lamp, showcasing its adjustable arm and parchment diffuser.
Operating Instructions
The Artemide Tolomeo Mega Floor Lamp features intuitive controls and adjustable components for versatile lighting.
Power On/Off
The lamp is equipped with a pull chain switch. Gently pull the chain to turn the lamp on or off.
Adjusting the Lamp Position
The lamp's arm structure is highly adjustable. You can modify the extension, height, and angle of the lamp head to direct light precisely where needed.
- Arm Extension: The articulated arm can extend from approximately 44.5 inches to 77.5 inches.
- Fixture Height: The overall height of the fixture can be adjusted from 58.25 inches to 128.75 inches.
- Shade Angle: The shade can be tilted to direct light.
Caution: When adjusting, hold the arm firmly to prevent sudden movements. Do not force joints beyond their natural range of motion.
Figure 2: The Artemide Tolomeo Mega Floor Lamp positioned in a room, demonstrating its extensive reach and adjustability.
Care and Maintenance
Regular care will help maintain the appearance and functionality of your Artemide Tolomeo Mega Floor Lamp.
- Cleaning: Disconnect the lamp from the power supply before cleaning. Use a soft, dry cloth to wipe down the aluminum surfaces. For the parchment diffuser, use a very lightly dampened cloth if necessary, and dry immediately. Avoid abrasive cleaners or solvents.
- Bulb Replacement: Ensure the lamp is unplugged and the bulb has cooled before attempting to replace it. Unscrew the old bulb and screw in a new E26 base bulb (up to 150W incandescent or equivalent LED).
- Joints and Tension: Periodically check the joints and tension control knobs. If the arm feels too loose or too stiff, gently adjust the tension knobs as needed. Do not overtighten.
Troubleshooting
If you encounter issues with your Artemide Tolomeo Mega Floor Lamp, refer to the following common problems and solutions:
| Problem | Possible Cause | Solution |
|---|---|---|
| Lamp does not turn on. | No power to the outlet, loose plug, faulty bulb, or faulty switch. | Check if the outlet is working with another device. Ensure the plug is fully inserted. Replace the bulb. If the issue persists, contact customer support. |
| Light flickers. | Loose bulb, incorrect bulb type, or unstable power supply. | Tighten the bulb. Ensure the bulb wattage and type are correct. Try plugging into a different outlet. |
| Arm is difficult to adjust or sags. | Tension control knobs require adjustment. | Gently adjust the tension control knobs at the joints until the desired movement and stability are achieved. |
| Lamp makes unusual noises. | Loose components or internal wiring issue. | Disconnect power immediately. Inspect for any loose parts. Do not attempt to repair internal wiring. Contact customer support. |
Specifications
Detailed technical specifications for the Artemide Tolomeo Mega Floor Lamp (Model TLM0100).
- Model: TLM0100
- Brand: Artemide
- Finish Type: Polished Aluminum
- Base Material: Aluminum
- Shade Material: Parchment Diffuser
- Bulb Base: E26
- Max Wattage Per Bulb: 150W (Incandescent)
- Light Source Type: Incandescent, LED compatible
- Voltage: 120 Volts
- Switch Type: Pull Chain
- Base Diameter: 12.5 inches
- Shade Diameter: 12.63 inches
- Shade Height: 8.69 inches
- Adjustable Arm Extension: 44.5 inches to 77.5 inches
- Adjustable Fixture Height: 58.25 inches to 128.75 inches
- Adjustable Fixture Width: 13 inches to 73.25 inches
- Item Weight: Approximately 35 pounds (15.88 kg)
- Indoor/Outdoor Usage: Indoor only
- Special Feature: Highly adjustable design
Warranty and Customer Support
Artemide products are manufactured to high standards. For specific warranty information regarding your Tolomeo Mega Floor Lamp, please refer to the documentation included with your purchase or visit the official Artemide website.
If you require technical assistance, have questions about assembly, or need to report a defect, please contact Artemide customer support directly. Contact details can typically be found on the manufacturer's website or in the product packaging.
Manufacturer: Artemide
Model Number: TLM0100
