ASUS TUF Gaming X570-Plus AM4 ATX Motherboard Instruction Manual

1. Introduction

The ASUS TUF Gaming X570-Plus motherboard is engineered for durability and performance, supporting AMD Ryzen 2nd and 3rd generation AM4 processors, including Zen 3 Ryzen 5000 series CPUs. This motherboard features PCIe 4.0 connectivity, dual M.2 slots, and a robust 12+2 Dr. MOS power stage design, ensuring stable and efficient operation for gaming and demanding applications. This manual provides essential information for setting up, operating, and maintaining your motherboard.

Figure 1: ASUS TUF Gaming X570-Plus Motherboard, highlighting compatibility with newer Ryzen processors.

2. Key Features

• AMD AM4 Socket and PCIe 4.0: Optimized for Zen 3 Ryzen 5000 & 3rd Gen AMD Ryzen CPUs, offering high-speed data transfer.
• Enhanced Power Solution: Features military-grade TUF Gaming components, ProCool sockets, and a Digi+ VRM with a 12+2 Dr. MOS power stage for maximum durability and stable power delivery.
• Comprehensive Cooling: Includes an active PCH heatsink, VRM heatsink, M.2 heatsink, hybrid fan headers, and Fan Expert 4 for efficient thermal management.
• Next-Gen Connectivity: Equipped with dual PCIe 4.0 M.2 slots, USB 3.2 Gen 2 ports, exclusive Realtek L8200A Gigabit Ethernet, TUF LANGuard, and Turbo LAN technology for high-speed networking and peripheral connections.
• Realtek S1200A Codec: Delivers pristine audio quality with a 108dB signal-to-noise ratio for stereo line-out and a 103dB SNR for line-in.

3. Setup and Installation

Before beginning installation, ensure your workspace is static-free. Refer to the motherboard layout diagram for component locations.

3.1. Unboxing and Components

Figure 2: Included accessories with the ASUS TUF Gaming X570-Plus Motherboard.

The retail package typically includes the ASUS TUF Gaming X570-Plus motherboard, a user manual, support DVD, rear I/O panel shield, 2 SATA cables, M.2 screw package, and TUF Gaming stickers.

3.2. CPU Installation

1. Locate the AM4 socket on the motherboard.
2. Lift the load lever and open the CPU socket cover.
3. Carefully align your AMD Ryzen processor with the socket, ensuring the golden triangle on the CPU matches the triangle on the socket. Do not force the CPU into the socket.
4. Close the socket cover and push down the load lever until it locks into place.

3.3. RAM (Memory) Installation

1. Locate the 4 DDR4 DIMM slots on the motherboard. For dual-channel configuration, refer to the motherboard manual for recommended slot pairing (usually A2 and B2 first).
2. Open the clips at both ends of the DIMM slot.
3. Align the notch on the memory module with the notch on the DIMM slot.
4. Press down firmly on both ends of the memory module until the clips snap into place.

3.4. M.2 SSD Installation

The motherboard features dual PCIe 4.0 M.2 slots, each with its own heatsink for optimal performance.

Figure 3: M.2 slots with heatsinks for high-speed storage.

1. Unscrew and remove the M.2 heatsink from the desired slot.
2. Insert your M.2 SSD into the slot at a 30-degree angle.
3. Push the SSD down and secure it with the provided M.2 screw.
4. Reattach the M.2 heatsink, ensuring proper contact with the SSD for cooling.

3.5. Graphics Card Installation

Insert your PCIe 4.0 graphics card into the reinforced PCIe 4.0 x16 slot. Ensure it is seated firmly and secured with the case's retention mechanism.

4. Operating Instructions

4.1. BIOS Setup

Upon first boot, press the DEL key during the POST (Power-On Self-Test) to enter the BIOS setup utility. Here you can configure system settings, boot order, and enable features like XMP for memory overclocking.

4.2. Software and Drivers

Install the necessary drivers and utilities from the provided support DVD or download the latest versions from the ASUS official website. Key utilities include:

• Armoury Crate: For system monitoring, RGB lighting control (Aura Sync), and driver updates.
• Fan Expert 4: For advanced fan control and thermal management.
• TUF LANGuard / Turbo LAN: For network optimization.

Figure 4: Motherboard features like Aura Sync RGB lighting and integrated audio.

5. Maintenance

• BIOS Updates: Regularly check the ASUS support website for the latest BIOS versions. It is crucial to update your BIOS if installing a compatible Ryzen 5000 series CPU. Follow the instructions provided by ASUS for a safe update process.
• Driver Updates: Keep all motherboard drivers (chipset, audio, LAN, etc.) updated to ensure system stability and performance.
• Physical Cleaning: Periodically clean dust from the motherboard and components using compressed air. Ensure the system is powered off and unplugged before cleaning.

6. Troubleshooting

If you encounter issues, consider the following general troubleshooting steps:

• No Display: Verify all power connections (24-pin ATX, 8-pin CPU, PCIe power for GPU). Reseat RAM modules and graphics card. Test with a single RAM stick.
• System Instability: Ensure all drivers are up to date. Check CPU and GPU temperatures. Verify RAM compatibility and stability (e.g., run memory tests).
• BIOS Issues: If the system fails to boot after a BIOS update, use the BIOS Flashback feature (if available and supported by your specific model) or consult the ASUS support website for recovery procedures.
• Peripheral Detection: Ensure USB devices are connected to the correct ports. Update chipset drivers.

7. Specifications

Figure 5: Detailed view of the motherboard's rear I/O panel.

8. Warranty and Support

For detailed warranty information and technical support, please refer to the official ASUS website or contact ASUS customer service. Keep your proof of purchase for warranty claims.