ALLWAY RM

ALLWAY Mini Bluetooth Speaker RM User Manual

1. Introduction

This manual provides detailed instructions for the ALLWAY Mini Bluetooth Speaker, model RM. It covers product features, setup procedures, operational guidelines, maintenance tips, and troubleshooting information to ensure optimal use of your device. The speaker is designed for portable wireless audio playback, featuring Bluetooth 5.0 connectivity and support for TF cards.

2. Package Contents

3. Product Overview

3.1 Key Features

3.2 Speaker Components and Controls

The ALLWAY Mini Bluetooth Speaker features a minimalist design with essential controls for ease of use.

ALLWAY Mini Bluetooth Speaker showing its compact size and lightweight design
Figure 1: The ALLWAY Mini Bluetooth Speaker highlighting its compact and lightweight design, making it easy to carry with one hand. The image displays two speakers, one with red accents and one with teal accents, against a vibrant background.

The speaker's small form factor allows for easy portability. It includes a power button, volume controls, a mode button, a Micro USB charging port, and a TF card slot. Specific button functions are detailed in the Operating section.

ALLWAY Mini Bluetooth Speaker with sound waves illustrating its powerful sound
Figure 2: Illustration of the speaker's 1.5-inch full-range driver producing clear sound at mid to high frequencies. The image shows sound waves emanating from the speaker, emphasizing its audio capabilities.

4. Setup

4.1 Charging the Speaker

  1. Locate the Micro USB charging port on the speaker.
  2. Connect one end of the provided Micro USB cable to the speaker's charging port.
  3. Connect the other end of the cable to a USB power source (e.g., computer USB port, USB wall adapter).
  4. The charging indicator light will illuminate (typically red) to show that the speaker is charging.
  5. Charging typically takes approximately 2 hours for a full charge. The indicator light will turn off or change color (e.g., blue) once fully charged.
ALLWAY Mini Bluetooth Speaker charging, indicating 7 hours of battery life
Figure 3: The ALLWAY Mini Bluetooth Speaker being charged via its Micro USB port. A full charge provides up to 7 hours of playback time.

4.2 Bluetooth Pairing

  1. Ensure the speaker is fully charged or has sufficient battery life.
  2. Press and hold the power button to turn on the speaker. The speaker will enter Bluetooth pairing mode, indicated by a flashing LED light (e.g., blue).
  3. On your mobile device (smartphone, tablet, laptop), navigate to the Bluetooth settings and ensure Bluetooth is enabled.
  4. Scan for available devices. You should see "ALLWAY" appear in the list.
  5. Select "ALLWAY" to initiate the pairing process.
  6. Once successfully paired, the speaker's LED light will typically stop flashing and remain solid (e.g., solid blue), and you may hear an audible confirmation tone.
  7. The speaker will automatically attempt to reconnect to the last paired device when powered on, if that device's Bluetooth is active and within range.
ALLWAY Mini Bluetooth Speaker connecting to a smartphone via Bluetooth 5.0
Figure 4: The ALLWAY Mini Bluetooth Speaker establishing a smooth and stable connection with a smartphone using Bluetooth 5.0 technology.

5. Operating Instructions

5.1 Power On/Off

5.2 Bluetooth Playback

5.3 TF Card Playback

6. Maintenance

7. Troubleshooting

ProblemPossible CauseSolution
Speaker does not turn onLow batteryCharge the speaker using the provided Micro USB cable.
Cannot pair with Bluetooth deviceSpeaker not in pairing mode; Bluetooth off on device; Device too farEnsure speaker is in pairing mode (flashing LED). Enable Bluetooth on your device. Move speaker closer to the device. Forget previous pairings on your device and try again.
No sound during playbackVolume too low; Speaker not connected; Incorrect audio sourceIncrease volume on both the speaker and your connected device. Verify the speaker is successfully paired. Ensure the correct playback mode (Bluetooth/TF card) is selected.
Poor sound quality or intermittent connectionInterference; Device too far; Low batteryMove the speaker closer to the connected device. Ensure no obstructions are between them. Charge the speaker. Avoid environments with strong Wi-Fi or other wireless interference.
TF card not playingCard not inserted correctly; Unsupported file format; Corrupted cardReinsert the TF card. Ensure audio files are in a supported format. Try a different TF card.

8. Specifications

9. Warranty and Support

For warranty information or technical support, please refer to the contact details provided on the product packaging or the official ALLWAY website. Keep your purchase receipt as proof of purchase for any warranty claims.

Related Documents - RM

Preview Allway Aqua 10 Smart Humidifier Speaker User Manual
User manual for the Allway Aqua 10 Smart Humidifier Speaker, detailing safety precautions, function overview, humidifier modes, Bluetooth connectivity, technical specifications, app guide, FCC statement, and warranty information.
Preview Allway PL20 Open Wireless Earphone Product Instructions and User Manual
Detailed instructions for the Allway PL20 Open Wireless Earphone, covering packaging, configuration, operation, pairing, controls, charging, safety, warranty, and FCC compliance. Learn how to use your Allway earbuds effectively.
Preview Allway Halo 20 Bluetooth Speaker User Manual and Specifications
User manual for the Allway Halo 20 Bluetooth speaker by Allway, covering functions, specifications, warranty, and FCC compliance. Includes setup, operation, and troubleshooting. Manufactured by Shenzhen TKT Innovations Co., Limited.
Preview ALLWAY Soft Grip Contour Scraper Set: Versatile Blades for Moldings & More
Discover the ALLWAY Soft Grip Contour Scraper Set, featuring 6 double-edge stainless steel blades and an ergonomic handle for detailed work on moldings, reveals, rods, and balusters. Includes blade file and storage case.