Introduction
The Line 6 Spider V60 MkII is a versatile 60-watt 1x10 combo guitar amplifier designed for practice, recording, and live performance. It offers a wide range of amplifier models, effects, and cabinet simulations, providing tools for both traditional and unique sound creation. Key features include Classic Speaker mode, a comprehensive selection of presets, a built-in wireless receiver, and USB connectivity for integration with the Spider V Remote editor app.
Package Contents
- Line 6 Spider V60 MkII Amplifier
- Power Cable
- User Manual (this document)
Setup
1. Unpacking and Placement
Carefully remove the amplifier from its packaging. Place the amplifier on a stable, level surface. Ensure adequate ventilation around the unit.
2. Power Connection
Connect the supplied power cable to the AC IN port on the rear panel of the amplifier and then to a suitable electrical outlet.
Figure 1: Rear panel connections, including the power input.
3. Instrument Connection
Plug your guitar into the INPUT jack on the front panel using a standard 1/4-inch instrument cable.
4. Optional Connections
- FBV Pedal: Connect an optional Line 6 FBV foot controller to the FBV PEDAL jack on the rear panel for hands-free control of presets and effects.
- USB: Connect the amplifier to a computer (Mac/PC) or mobile device (iOS/Android) via the USB port for recording, editing tones with the Spider V Remote app, and firmware updates.
- AUX IN: Connect an external audio player to the AUX IN jack to play along with backing tracks.
- Headphones/Line Out: Use the PHONES/LINE OUT jack for silent practice with headphones or for connecting to a mixing console or audio interface.
Figure 2: Optional Line 6 FBV footswitch for enhanced control.
Figure 3: USB connectivity for recording and app control.
Operating Instructions
Front Panel Controls Overview
Figure 4: Front panel of the Spider V60 MkII amplifier.
| Control | Function |
|---|---|
| INPUT | 1/4-inch input for your instrument. |
| DRIVE | Adjusts the amount of gain or distortion. |
| BASS, MID, TREBLE | Tone stack controls for low, mid, and high frequencies. |
| VOLUME | Controls the output level of the selected amplifier model. |
| AMP | Selects amplifier models. |
| FX1, FX2, FX3 | Controls for various effects (e.g., modulation, delay). |
| REVERB | Adjusts the amount of reverb effect. |
| MASTER | Overall output volume control for the amplifier. |
| PHONES/LINE OUT | Headphone output or line-level output for recording/PA. |
| Display Screen | Shows current preset, amp model, and effect settings. |
| Navigation Buttons | Used to scroll through presets and edit parameters. |
Preset Selection and Editing
The Spider V60 MkII comes with a wide array of factory presets, including Artist, Iconic Song, and classic amp presets. Use the navigation buttons to scroll through and select different presets. To customize a preset, adjust the tone and effect knobs. Your changes can be saved to a user preset slot.
Figure 5: Amplifier display showing various preset options.
Classic Speaker Mode
Engage the Classic Speaker mode for an organic sound and feel, emulating traditional guitar amplifier cabinets. This mode provides a different tonal response compared to the full-range speaker mode.
Figure 6: Internal speaker configuration, relevant to Classic Speaker Mode.
Wireless Receiver
The Spider V60 MkII features a built-in wireless receiver compatible with Line 6 Relay transmitters. This allows for cable-free instrument connection. Refer to your Line 6 Relay transmitter manual for pairing instructions.
Figure 7: Line 6 Relay wireless transmitter for cable-free playing.
Metronome and Drum Loops
Utilize the built-in metronome and drum loops for practice and timing improvement. These features can be accessed and controlled via the amplifier's interface or the Spider V Remote app.
Figure 8: Visual representation of a metronome, indicating the amplifier's built-in timing tools.
Maintenance
- Cleaning: Wipe the exterior of the amplifier with a soft, dry cloth. Avoid using abrasive cleaners or solvents.
- Storage: Store the amplifier in a dry environment, away from extreme temperatures and direct sunlight.
- Transportation: When transporting, ensure the amplifier is securely packed to prevent damage.
Troubleshooting
| Problem | Possible Cause / Solution |
|---|---|
| No Sound Output |
|
| Distorted or Unwanted Noise |
|
| Spider V Remote App Connectivity Issues |
|
Specifications
| Feature | Detail |
|---|---|
| Brand | Line 6 |
| Model Number | 99-010-0225 |
| Output Wattage | 60 Watts |
| Speaker Configuration | 1x10 Combo |
| Speaker Amplification Type | Active |
| Item Weight | 26.2 pounds |
| Product Dimensions | 9.1 x 17.4 x 16.9 inches |
| Color | Black |
| Material | Metal, Plastic |
| Power Source | Corded Electric |
| Connector Type | Plug, Wireless |
| Compatible Devices | Drum (likely refers to drum loops/metronome functionality) |
| Date First Available | May 30, 2019 |
Warranty and Support
For warranty information and technical support, please refer to the official Line 6 website or contact their customer service. Product registration may be required to activate your warranty.
You can visit the official Line 6 store for more information: Line 6 Store
