1. Introduction
This manual provides essential information for the installation, operation, and maintenance of your Teka Be Linea RS15 45.40 Undermount Sink. This 18/10 stainless steel sink features a square basin with a depth of 200 mm, designed for robust performance and resistance to deformation and scratches. It incorporates SilentSmart technology to reduce noise during use. Please read this manual thoroughly before installation and use to ensure proper function and longevity of your product.
Figure 1: Top view of the Teka Be Linea RS15 45.40 Undermount Sink, showcasing its square basin and central drain with basket valve.
2. Safety Information
- Always ensure the water supply is turned off before beginning any installation or maintenance work.
- Wear appropriate personal protective equipment, such as gloves and eye protection, during installation.
- Handle the sink with care to avoid scratches or damage to the finish.
- Ensure all connections are watertight to prevent leaks.
- If you are unsure about any part of the installation process, consult a qualified professional.
3. Package Contents
Verify that all components are present and undamaged before proceeding with installation.
- Teka Be Linea RS15 45.40 Undermount Sink
- Drain with Basket Valve
- Siphon
- Special Installation Clips
4. Setup and Installation
The Teka Be Linea RS15 45.40 is designed for undermount installation, providing a seamless look with your countertop. It is suitable for 60cm furniture.
- Prepare the Countertop: Ensure the countertop opening is precisely cut according to the provided template and dimensions. Refer to Figure 3 for cutout dimensions.
- Position the Sink: Carefully place the sink into the countertop opening from below.
- Secure the Sink: Use the special installation clips provided to secure the sink firmly to the underside of the countertop. Ensure even pressure for a stable fit.
- Install Drain and Siphon: Connect the drain with the basket valve to the sink opening. Attach the siphon assembly, ensuring all connections are tightened and sealed to prevent leaks.
- Connect Plumbing: Connect the siphon to your household drainage system. Test for leaks by running water into the sink.
Figure 2: Dimensional drawing showing the top view of the sink with measurements (e.g., 450mm width, 400mm depth for the basin, 490mm overall width, 440mm overall depth).
Figure 3: Countertop cutout diagram, indicating required dimensions (e.g., 446mm width, 396mm depth) and corner radius (R13) for proper undermount installation.
Figure 4: An example of the Teka Be Linea RS15 45.40 sink installed as an undermount unit in a kitchen countertop, demonstrating its integrated appearance with a faucet.
5. Operation
The Teka Be Linea RS15 45.40 sink functions as a standard kitchen basin.
- Water Flow: Use your kitchen faucet to control water flow into the sink.
- Drainage: The integrated basket valve allows for efficient drainage and can be used to catch food debris, preventing clogs in the siphon.
- SilentSmart Technology: The sink's design includes soundproofing pads to minimize noise from water impact, contributing to a quieter kitchen environment.
6. Maintenance and Care
Proper care will help maintain the appearance and longevity of your stainless steel sink.
- Daily Cleaning: Clean the sink regularly with a soft cloth or sponge and mild soap or a stainless steel cleaner. Rinse thoroughly with clean water and dry to prevent water spots.
- Avoid Abrasives: Do not use abrasive cleaners, steel wool, or harsh chemicals (e.g., bleach, strong acids) as these can scratch or damage the stainless steel finish.
- Prevent Stains: Avoid leaving acidic foods (e.g., citrus, tomatoes) or corrosive substances in direct contact with the sink surface for extended periods.
- Basket Valve: Regularly clean the basket valve to remove food debris and ensure proper drainage.
7. Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Slow Drainage | Clogged basket valve or siphon. | Remove and clean the basket valve. Inspect and clear any blockages in the siphon. |
| Water Leaks | Loose connections in drain or siphon. | Check and tighten all plumbing connections. Ensure seals are properly seated. |
| Surface Scratches | Abrasive cleaning materials or sharp objects. | Use non-abrasive cleaners and avoid dragging sharp objects across the sink surface. Minor scratches can sometimes be buffed out with specialized stainless steel polish. |
| Water Spots/Stains | Hard water deposits or improper drying. | Wipe the sink dry after each use. Use a vinegar solution or specialized stainless steel cleaner for stubborn spots. |
8. Specifications
- Model: RS15 45.40
- Brand: Teka
- Material: 18/10 Stainless Steel, Alloy Steel
- Installation Type: Undermount
- Shape: Square
- Overall Dimensions (Approx.): 49 cm (W) x 44 cm (D) x 20 cm (H) (19.3" W x 17.3" D x 7.9" H)
- Basin Dimensions (Approx.): 45 cm (W) x 40 cm (D) x 20 cm (Depth) (17.7" W x 15.7" D x 7.9" Depth)
- Minimum Base Cabinet Width: 60 cm (23.6 inches)
- Drain Type: Grid with Basket Valve
- Technology: SilentSmart (Noise Reduction)
- Item Weight: Approximately 15 kg (33 lbs)
- Manufacturer Part Number: 115000006
- Item Model Number: 8434778004311
9. Warranty and Support
Teka products are manufactured to high-quality standards and come with a manufacturer's warranty. For specific warranty details, please refer to the documentation included with your purchase or visit the official Teka website.
For technical support, spare parts, or service inquiries, please contact Teka customer service through their official channels.
