Bostik TruColor RapidCure Grout User Manual

Introduction

The Bostik TruColor RapidCure Urethane Grout is a premium, pre-mixed, and ready-to-use solution designed for tile grouting. This product is formulated with urethane and quartz, offering durability and ease of application. It eliminates the need for additional sealing and provides resistance against common food stains and household chemical products, ensuring a long-lasting and clean finish for your tiled surfaces.

Product Overview

Bostik TruColor RapidCure Grout Container

This image displays the 9lb container of Bostik TruColor RapidCure Grout. The container is white with a blue lid and features the Bostik logo and product name. It highlights key features such as "Premium, Pre-Mixed, Urethane Grout" and "Grout - Tile". The specific color of this product is Lunar (H196).

Available Color Swatches

This image presents a range of color swatches available for Bostik TruColor RapidCure Grout, each labeled with its corresponding color name and code (e.g., H196 Lunar). These swatches are crucial for selecting the appropriate grout color to match your tile project. The Lunar color is a medium gray shade.

Setup and Preparation

Bostik TruColor RapidCure Grout is a pre-mixed product, simplifying the setup process. No additional mixing or sealing is required before or after application.

Important Considerations:

• Ensure the tile installation is fully cured and dry according to the tile adhesive manufacturer's instructions before grouting.
• Verify the chosen grout color matches your project requirements using the provided color charts.
• This product is not for use in hot tubs, steam showers, or areas intended to be submerged in water (such as pools, fountains, or water features).

Operating Instructions

This grout is designed for easy installation by both DIY enthusiasts and professional contractors.

Application Steps (General Guidelines):

1. Open the container and stir the grout thoroughly to ensure consistent texture.
2. Apply the grout to the tile joints using a rubber float, ensuring all joints are completely filled.
3. Remove excess grout from the tile surface immediately using the edge of the float.
4. Clean the tile surface with a damp sponge, wiping diagonally across the grout lines to avoid pulling grout from the joints. Rinse the sponge frequently.
5. Allow the grout to cure. The product permits water exposure after 3 days.

Maintenance and Care

Bostik TruColor RapidCure Grout is resistant to most food stains and common household chemical products, making it easy to maintain.

Cleaning Recommendations:

• For routine cleaning, use a mild, pH-neutral cleaner and a soft cloth or sponge.
• Wipe up spills promptly to prevent potential staining, although the grout is highly resistant.
• Avoid abrasive cleaners or harsh chemicals that could damage the grout surface or surrounding tiles.

Troubleshooting

While Bostik TruColor RapidCure Grout is designed for ease of use, here are some common issues and general advice:

• Grout Haze: If a haze remains on the tile surface after initial cleaning, allow the grout to dry for a few hours, then buff the surface with a clean, dry cloth or a specialized grout haze remover if necessary.
• Uneven Color: Ensure the grout is thoroughly stirred before and during application to maintain consistent color. Apply evenly across all joints.
• Cracking/Shrinkage: Ensure proper substrate preparation and follow all application guidelines. Avoid applying grout too thinly.

Product Compatibility and Conversion

TruColor vs. QuartzLock2 Grout

Bostik TruColor Grout is equivalent to Bostik QuartzLock2 Grout. This image visually represents the equivalence between the two product lines. Users transitioning between these products can refer to the conversion chart for exact color matches.

Color Conversion Chart

This detailed chart provides a comprehensive conversion guide between Bostik TruColor RapidCure and Bostik QuartzLock2 grout colors. It lists color names, codes, and available sizes (9 lbs, 18 lbs) for both product lines, indicating corresponding colors or noting "New color" where direct matches are not available. It also lists some QuartzLock2 colors that do not have a direct TruColor equivalent, suggesting close matches.

Specifications

Warranty and Support

Specific warranty details for Bostik TruColor RapidCure Grout are typically provided at the point of purchase or on the product packaging. For detailed warranty information or technical support, please contact Bostik Smart Adhesives directly.

Additional product information and resources may be available at the official Bostik website or through authorized distributors. You can also find more information here.