1. Introduction
Welcome to the ultimate spa experience with your INTEX PureSpa Bubble Massage Inflatable Spa. This manual provides essential information for the safe and efficient operation, maintenance, and enjoyment of your spa. Please read it thoroughly before setup and use.
Figure 1: The INTEX PureSpa Bubble Massage Inflatable Spa, ready for use.
2. Important Safety Information
Always follow basic safety precautions when installing and using this electrical product. Failure to follow these instructions could result in injury or death.
- DANGER: Risk of Accidental Drowning. Extreme caution must be exercised to prevent unauthorized access by children.
- WARNING: To reduce the risk of injury, do not permit children to use this product unless they are closely supervised at all times.
- WARNING: Risk of Electric Shock. Connect only to a grounded receptacle.
- WARNING: Do not use an extension cord.
- WARNING: Water temperature in excess of 104°F (40°C) may be harmful to your health.
- WARNING: Pregnant women and persons with heart disease, high blood pressure, diabetes, or other health conditions should consult a physician before using a spa.
- WARNING: To avoid injury, exercise care when entering or exiting the spa.
- WARNING: Do not use drugs or alcohol before or during spa use to avoid unconsciousness and possible drowning.
- WARNING: Always test the water temperature before entering the spa.
3. Package Contents
Your INTEX PureSpa package includes the following items:
- Inflatable Spa Unit
- Spa Control Unit (Pump/Heater/Blower)
- Insulated Spa Cover with Lock
- Thermal Ground Cloth
- Inflation Hose
- 3-Way Test Strip
- 2 Filter Cartridges
- Floating Pool Chlorine Dispenser
- Carry Bag
4. Setup Instructions
Follow these steps to set up your PureSpa Bubble Massage Inflatable Spa:
- Site Selection: Choose a flat, level surface free of sharp objects. Ensure adequate drainage and proximity to a grounded electrical outlet.
- Ground Cloth Placement: Lay the thermal ground cloth on the selected site. This provides insulation and protection for the spa base.
- Unfold Spa: Carefully unfold the inflatable spa unit onto the ground cloth.
- Connect Control Unit: Attach the spa control unit to the spa. Ensure all connections are secure.
- Inflate Spa: Use the provided inflation hose to connect the control unit's air pump to the spa's inflation valve. Turn on the control unit and activate the bubble function to inflate the spa. The spa will automatically stop inflating when it reaches the correct pressure.
Figure 2: A person connecting the inflation hose to the spa control unit for setup.
Setup Video Guide
Video 1: This video demonstrates the inflation and initial setup process for the Intex Hot Tub, showing how to connect the pump and inflate the spa.
Video 2: This video provides a full review and assembly guide for the Intex Bubble Spa, detailing the unboxing and step-by-step assembly.
5. Operating Instructions
The PureSpa control panel allows you to manage all spa functions. Ensure the spa is filled with water to the recommended level before operating the heater or bubble jets.
Control Panel Functions:
- Power Button: Turns the spa control unit on/off.
- Temperature Adjustment: Use the up/down arrows to set your desired water temperature (68°F - 104°F / 20°C - 40°C).
- Heater Button: Activates the heating system. The indicator light will turn green when heating is active.
- Bubble Button: Activates the 140 high-powered bubble jets for a relaxing massage.
- Filter Button: Turns the filter pump on/off to circulate and clean the water.
- °C/°F Button: Toggles the temperature display between Celsius and Fahrenheit.
Figure 3: The INTEX PureSpa in a backyard, demonstrating the bubble massage function.
Operating Video Guide
Video 3: This video discusses the energy efficiency of the spa cover, particularly in sub-zero temperatures, highlighting its ability to maintain water temperature.
6. Maintenance
Regular maintenance is crucial for the longevity and performance of your spa.
Water Treatment:
- Use the included 3-way test strip to regularly check water chemistry (chlorine, pH, alkalinity).
- Adjust chemicals as needed using the floating chlorine dispenser and appropriate spa chemicals.
- The built-in hard water treatment system helps reduce calcium buildup, but regular testing is still recommended.
Filter Cartridges:
- Clean filter cartridges weekly by rinsing with a garden hose.
- Replace cartridges every 2-4 weeks, depending on usage and water quality.
Spa Cover:
- Always keep the insulated cover on the spa when not in use to minimize heat loss and prevent debris from entering.
- Secure the cover with the integrated locks for safety.
7. Troubleshooting
If you encounter issues with your spa, refer to the following common problems and solutions:
| Problem | Possible Cause | Solution |
|---|---|---|
| Spa not heating | Low water level, dirty filter, heater error code | Ensure water is above minimum line, clean/replace filter, check control unit for error codes and consult manual. |
| Bubbles not working | Blower motor issue, control panel error | Check power connection, restart spa, consult manual for specific error codes. |
| Water quality issues (cloudy, green) | Improper chemical balance, dirty filter, insufficient filtration time | Test and adjust water chemistry, clean/replace filter, increase filtration time. |
| Spa losing air | Leak in spa liner or valve | Locate leak using soapy water, repair with included patch kit, ensure valves are tightly closed. |
8. Specifications
- Brand: INTEX
- Model Name: PureSpa Bubble Massage
- Item Model Number: 28425E
- Seating Capacity: 4 People
- Water Capacity: 210 Gallons
- Product Dimensions: 77"L x 77"W x 28"H
- Material: Polyvinyl Chloride (PVC)
- Voltage: 120 Volts
- Number of Jets: 140
- Water Temperature Range: 68°F - 104°F (20°C - 40°C)
- Item Weight: 96.3 pounds
- Assembly Required: Yes
9. Warranty and Support
Your INTEX PureSpa Bubble Massage Inflatable Spa comes with a 1-Year Limited Manufacturer's Warranty. For warranty claims, technical support, or replacement parts, please refer to the contact information provided in your product packaging or visit the official INTEX website.
For additional support, you may also contact the seller, Homegoods Shop, for assistance with returns or product inquiries within their 30-day easy return policy.
