Cambridge Audio AXC35 Single-Disc CD Player User Manual

1. Introduction

The Cambridge Audio AXC35 is a high-performance single-disc CD player designed to deliver exceptional audio quality from your CD collection. Engineered with a focus on pure sound reproduction, it incorporates a premium Wolfson WM8524 Digital-to-Analog Converter (DAC) and a two-pole Butterworth filter to ensure clarity and precision. This player supports gapless playback and is compatible with MP3 and WMA files recorded on CD-R, CD-RW, and CD-ROM discs. Its robust all-metal chassis minimizes vibration, contributing to consistent and undistorted audio performance.

Figure 1: Front view of the Cambridge Audio AXC35 CD Player, showcasing its sleek design and disc tray.

2. Setup

2.1 Unpacking

• Carefully remove the AXC35 CD player from its packaging.
• Check that all accessories, including the remote control and power cable, are present.

2.2 Placement

• Place the CD player on a stable, level surface away from direct sunlight, heat sources, or excessive vibration.
• Ensure adequate ventilation around the unit.

Figure 2: Angled view of the AXC35, illustrating its compact dimensions (3.0" x 16.9" x 12.2") and weight (8.3 lbs).

2.3 Audio Connections

Connect the AXC35 to your amplifier using one of the following methods:

• Analog RCA Output: Use a high-quality RCA cable to connect the 'Line Output' (L/R) on the AXC35 to an available analog input on your amplifier.
• Digital Coaxial Output: For digital connection, use a coaxial cable to connect the 'Digital Output' (Coaxial) on the AXC35 to a digital coaxial input on your amplifier or external DAC.

Figure 3: Rear panel connections of the AXC35, including analog RCA and digital coaxial outputs.

2.4 Power Connection

• Connect the supplied power cable to the AC power inlet on the rear of the AXC35 and then to a suitable wall outlet.

2.5 Remote Control

• Insert the two supplied AAA batteries into the remote control, ensuring correct polarity.

3. Operating Instructions

3.1 Powering On/Off

• Press the power button on the front panel or the remote control to turn the unit on or off.

3.2 Loading a CD

• Press the 'Open/Close' button (triangle icon) on the front panel or remote to open the disc tray.
• Place a CD, CD-R, CD-RW, or CD-ROM (with MP3/WMA files) onto the tray with the label side facing up.
• Press the 'Open/Close' button again to close the tray. The player will begin reading the disc.

3.3 Playback Controls

• Play/Pause: Press the 'Play/Pause' button (triangle/two vertical bars icon) to start or pause playback.
• Stop: Press the 'Stop' button (square icon) to halt playback.
• Skip Track: Use the 'Skip Forward' (double arrow right) or 'Skip Backward' (double arrow left) buttons to navigate between tracks.
• Fast Forward/Rewind: Hold down the 'Skip Forward' or 'Skip Backward' buttons during playback to fast forward or rewind within a track.

Figure 4: Front panel controls for disc operation, including play, pause, stop, and skip functions.

3.4 Digital Output Usage

• The dedicated digital output allows you to record from a CD to a digital format or connect to a standalone DAC for further sound enhancement.

3.5 Remote Control Functions

• The remote control provides full functionality for power, disc tray operation, playback controls, and other settings.

4. Maintenance

4.1 Cleaning the Unit

• Wipe the exterior of the unit with a soft, dry, lint-free cloth.
• Do not use abrasive cleaning agents, waxes, or solvents.

4.2 Disc Care

• Handle CDs by their edges to avoid fingerprints or scratches.
• Store discs in their cases when not in use.

5. Troubleshooting

6. Specifications

7. Warranty and Support

For detailed warranty information and technical support, please refer to the official Cambridge Audio website or contact your authorized dealer. Keep your proof of purchase for any warranty claims.