IKEA PS 2014 Pendant Lamp Instruction Manual

1. Introduction

This manual provides detailed instructions for the safe assembly, installation, operation, and maintenance of your IKEA PS 2014 Pendant Lamp. Please read all instructions carefully before beginning installation and retain this manual for future reference.

The IKEA PS 2014 pendant lamp features a unique design that allows you to adjust the light intensity and create decorative patterns by manipulating its shape. This product bears the CE mark, indicating compliance with European safety standards.

2. Safety Information

• Electrical Safety: Installation must be performed by a qualified electrician in accordance with local electrical codes. Always switch off the power at the main circuit breaker before installation or maintenance.
• Bulb Type: Use only the recommended light bulb type: LED bulb E27 globe clear. Using an incorrect bulb may cause damage or fire.
• Clearance: Ensure adequate clearance around the lamp to prevent overheating and allow for proper light distribution.
• Handling: Handle the lamp components with care to avoid damage.
• Cleaning: Disconnect power before cleaning. Use a dry cloth; do not use liquid or abrasive cleaners.

3. Package Contents

Verify that all components are present before beginning assembly:

• Pendant lamp shade components (blades, arms)
• Ceiling cup
• Ball/Bracket components
• Cord with pull strings
• Mounting hardware (screws, anchors)
• Note: Light bulb (E27 globe clear LED) is sold separately.

Figure 1: The IKEA PS 2014 Pendant Lamp in its closed configuration, showcasing its distinctive design and white finish.

4. Assembly Instructions

The IKEA PS 2014 pendant lamp requires assembly. Follow these steps carefully:

1. Unpack all components and lay them out on a clean, flat surface.
2. Assemble the inner frame structure according to the diagrams provided in the separate assembly leaflet (not included in this general manual).
3. Attach the individual ABS plastic blades to the frame, ensuring they are securely fastened. The blades form the adjustable outer shell of the lamp.
4. Connect the pull strings to the designated mechanisms that control the opening and closing of the lamp blades.
5. Insert the E27 globe clear LED bulb (sold separately) into the lamp holder.

5. Installation

Warning: Electrical installation should only be performed by a qualified electrician. Ensure power is disconnected at the main circuit breaker before proceeding.

1. Turn off the power supply to the installation area at the main circuit breaker.
2. Mount the ceiling cup to the ceiling junction box using the provided mounting hardware. Ensure it is securely fastened to a structural element.
3. Connect the electrical wires from the lamp to the household wiring according to local electrical codes (typically live to live, neutral to neutral, and ground to ground).
4. Carefully tuck the wires into the ceiling cup and secure the lamp to the ceiling cup.
5. Restore power at the main circuit breaker and test the lamp.

Figure 2: The IKEA PS 2014 Pendant Lamp illuminating a dining area, demonstrating its functional and aesthetic appeal when installed.

6. Operating Instructions

The IKEA PS 2014 Pendant Lamp features an adjustable design to control light output and ambiance.

• Adjusting Light Intensity: The lamp's shape can be changed by pulling the two strings located at the bottom of the fixture.
• Closed Position: Pull one string to close the lamp, creating a more diffused and softer mood light. This position also casts decorative patterns on the ceiling and walls.
• Open Position: Pull the other string to open the lamp, allowing for a brighter, more general light.
• Experiment with different degrees of opening to achieve your desired lighting effect.

Figure 3: A detailed view of the lamp's adjustable blades, highlighting the mechanism that allows users to change its shape and light output.

7. Maintenance and Care

• Cleaning: Before cleaning, ensure the lamp is switched off and cooled down. Wipe the lamp with a dry, soft cloth. Do not use water, chemical cleaners, or abrasive materials, as these can damage the finish and electrical components.
• Bulb Replacement: Always switch off the power at the main circuit breaker before replacing the light bulb. Allow the bulb to cool completely. Replace with an E27 globe clear LED bulb (maximum 13W).
• Inspection: Periodically inspect the cord and connections for any signs of wear or damage. If any damage is found, discontinue use and consult a qualified electrician.

8. Troubleshooting

9. Specifications

• Model: IKEA PS 2014
• Brand: IKEA
• Max. Wattage: 13 W
• Light Source Type: LED (E27 globe clear recommended)
• Diameter: 0.35 m (14 inches)
• Cord Length: 1.5 m (4 feet 11 inches)
• Materials:
  • Blade: ABS plastic
  • Arm: Reinforced polyamide plastic
  • Ceiling cup/Ball: Polypropylene plastic
  • Bracket: Polyamide plastic
  • String: Polyethylene plastic
• Item Weight: Approximately 2.14 kg (4.71 pounds)
• Product Dimensions: 0.48 x 0.39 x 0.23 inches (packaging/shipping dimensions, actual assembled diameter is 14 inches)
• Assembly Required: Yes
• Indoor/Outdoor Usage: Indoor
• Control Method: Pull Chain

10. Warranty and Support

For information regarding warranty coverage, product support, or replacement parts, please refer to the official IKEA website or contact IKEA customer service directly. Keep your proof of purchase for warranty claims.