Introduction
Thank you for choosing the Nanlite LumiPad 25 LED Panel. This manual provides essential information for the safe and effective operation of your device. Please read it thoroughly before use and retain it for future reference.
Safety Precautions
- Do not expose the device to water or high humidity.
- Avoid direct eye exposure to the LED light.
- Use only approved power adapters and batteries.
- Do not attempt to disassemble or modify the unit.
- Keep out of reach of children.
Package Contents
Please verify that all items are present in your package:
- Nanlite LumiPad 25 LED Panel
- Mounting Adapter
- AC Power Adapter (may be sold separately)
- User Manual
Setup
1. Mounting the Light Panel
- Attach the included mounting adapter to the 1/4-inch screw thread located at the bottom of the LumiPad 25.
- Secure the mounting adapter to a compatible light stand or tripod.
- Adjust the angle of the LED panel using the tilt mechanism on the mounting adapter.
2. Powering the Device
The LumiPad 25 offers multiple power options:
- AC Power: Connect the AC power adapter to the DC IN port on the back of the panel, then plug the adapter into a wall outlet.
- Battery Power: Insert two compatible NP-F style batteries (sold separately) into the battery slots on the back of the panel. Ensure correct polarity.
Operation
1. Power On/Off
Locate the power switch on the back of the panel. Flip the switch to the 'ON' position to power on the light. Flip it to 'OFF' to power off.
2. Adjusting Brightness
Use the 'DIMMER' control knob on the back of the panel to adjust the light output from 0% to 100% brightness. Rotate clockwise to increase brightness and counter-clockwise to decrease.
3. Adjusting Color Temperature
Use the '5600K' control knob on the back of the panel to adjust the color temperature from warm (3200K) to cool (5600K). Rotate clockwise for cooler temperatures and counter-clockwise for warmer temperatures.
Maintenance
Cleaning
To clean the LED panel, use a soft, dry cloth. For stubborn marks, a slightly damp cloth with mild detergent can be used, ensuring no liquid enters the device. Do not use abrasive cleaners or solvents.
Storage
When not in use, store the LumiPad 25 in a cool, dry place, away from direct sunlight and extreme temperatures. If storing for extended periods, remove batteries.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Light does not turn on. | No power, faulty connection, or depleted batteries. | Check power adapter connection or replace/recharge batteries. Ensure power switch is ON. |
| Brightness not adjusting. | Dimmer knob not functioning or at minimum/maximum setting. | Rotate the dimmer knob fully in both directions. If issue persists, contact support. |
| Color temperature not changing. | Color temperature knob not functioning or at minimum/maximum setting. | Rotate the color temperature knob fully in both directions. If issue persists, contact support. |
Specifications
| Feature | Detail |
|---|---|
| Model Number | 11-2002 |
| Product Dimensions | 13.58 x 37 x 9 inches (overall packaging) / 1.2"L x 1.2"W x 1.2"H (unit) |
| Item Weight | 7.1 ounces |
| Brightness | 2140 lumens (max) |
| Color Temperature | 3200K - 5600K |
| Power Options | AC Adapter, NP-F style batteries, DC via D-tap cable |
Warranty and Support
Nanlite products are covered by a limited warranty. For detailed warranty information, technical support, or service inquiries, please visit the official Nanlite website or contact your local distributor.
Official Nanlite Website: www.nanlite.com