Introduction
The iLIVING 12" Wall Mounted Shutter Exhaust Fan with Thermostat Control is engineered to provide efficient and reliable ventilation for a variety of indoor spaces. This unit is designed to reduce cooling costs by effectively moving air, helping to regulate room temperature and improve overall air quality. Its robust construction ensures durability and long-term performance.
Figure 1: iLIVING 12" Wall Mounted Shutter Exhaust Fan.
This fan is suitable for use in homes, attics, garages, sheds, and other areas requiring improved air circulation and temperature regulation. Its automatic shutters and variable speed settings offer flexible control over your environment.
Figure 2: Illustration of the fan's air circulation principle, exhausting hot air and drawing in cool air.
Safety Information
Please read all instructions carefully before installation and operation. Failure to follow these instructions may result in electric shock, fire, or serious injury.
- Ensure the power source matches the fan's voltage requirements (120V).
- Always disconnect power before performing any maintenance or cleaning.
- Do not operate the fan with a damaged cord or plug.
- Keep hands, hair, and loose clothing away from moving parts.
- Install the fan in a location where it is protected from direct water exposure.
- The fan is UL Listed, indicating compliance with safety standards.
Product Features
- Heavy-Duty Construction: Features a galvanized steel frame for durability and weather-resistant aluminum shutters and blades.
- Thermostat Control: Built-in adjustable capillary thermostat allows temperature regulation between 32-130 °F (0-54 °C).
- Multiple Speeds: Offers 3-speed settings for customizable airflow, controlled via a pull chain.
- Efficient Airflow: Provides 960 CFM (Cubic Feet Per Minute) of airflow, covering up to 1200 SQF.
- Quiet Operation: Motion-balanced design contributes to reduced noise during operation.
- Safety Features: Equipped with OSHA compliant wire guards and a thermally protected, permanently lubricated motor.
- Automatic Shutters: Shutters open when the fan is on and close automatically when off, providing a tight seal against insects and weather.
Figure 3: Key features of the iLIVING 12" Shutter Exhaust Fan.
Setup and Installation
The iLIVING 12" Wall Mounted Shutter Exhaust Fan is designed for simple, electrician-free installation. It comes fully assembled and ready to be plugged into an approved electrical outlet.
Unpacking
- Carefully remove the fan from its packaging.
- Inspect the unit for any signs of damage during shipping. Do not use if damaged.
- Ensure all components are present: the fan unit, 6 ft power cord with standard 3-prong plug, and AC cable.
Mounting
- Choose a suitable location for mounting, such as an attic gable, garage wall, or shed opening. Ensure the mounting surface is sturdy enough to support the fan's weight (approximately 10.5 lbs).
- The fan requires a square opening of approximately 13 inches for optimal fit. The overall product dimensions are 15"W x 15"H x 6.4"D.
- Secure the fan to the wall using appropriate fasteners (not included) through the pre-drilled holes on the fan's frame. Ensure the fan is level and securely attached to prevent vibration and noise.
Electrical Connection
- Once mounted, plug the 3-prong power cord into a standard 120V AC electrical outlet.
- Ensure the outlet is properly grounded and meets local electrical codes.
Operating Instructions
The iLIVING 12" Wall Mounted Shutter Exhaust Fan features both thermostat control and a pull chain for speed adjustment.
Thermostat Control
- The built-in thermostat allows the fan to automatically turn on and off based on the ambient temperature.
- Locate the thermostat dial on the unit. It is typically marked with temperature ranges (e.g., LOW (Min 32°F) to HI (Max 130°F)).
- Rotate the dial to set your desired temperature. The fan will activate when the temperature rises above the set point and deactivate when it falls below.
- The thermostat includes a bypass switch, allowing continuous operation regardless of temperature if desired.
Figure 4: Thermostat control dial for temperature regulation.
Speed Adjustment
- The fan features a pull chain for manual speed selection.
- Pull the chain once for the first speed setting.
- Pull the chain again for the second speed setting.
- Pull the chain a third time for the highest speed setting.
- Pull the chain a fourth time to turn the fan off.
Maintenance
Regular maintenance ensures the longevity and efficient operation of your iLIVING exhaust fan.
- Cleaning: Periodically clean the fan blades and shutters to prevent dust and debris buildup, which can reduce airflow and efficiency. Use a soft cloth and mild detergent. Ensure the fan is unplugged before cleaning.
- Motor: The motor is permanently lubricated and thermally protected, requiring no additional lubrication.
- Inspection: Regularly inspect the power cord for any signs of damage. Check the mounting hardware to ensure the fan remains securely attached.
- Shutters: Ensure the automatic shutters open and close freely. Clear any obstructions that might prevent proper operation.
Troubleshooting
If you encounter issues with your iLIVING exhaust fan, refer to the following common troubleshooting steps:
| Problem | Possible Cause | Solution |
|---|---|---|
| Fan does not turn on. | No power to the outlet. Thermostat set too high. Pull chain in "off" position. | Check circuit breaker/fuse. Lower thermostat setting or use bypass switch. Pull chain to cycle through speeds. |
| Reduced airflow. | Dirty blades or shutters. Obstruction in front or behind fan. | Clean blades and shutters. Remove any obstructions. |
| Excessive noise or vibration. | Loose mounting hardware. Fan not level. Debris on blades. | Tighten mounting screws. Adjust fan position to be level. Clean blades. |
| Shutters not opening/closing properly. | Obstruction or debris. Damaged shutters. | Clear obstructions. Contact customer support if damaged. |
Specifications
Detailed technical specifications for the iLIVING 12" Wall Mounted Shutter Exhaust Fan with Thermostat Control (Model: ILG8SF12V-T).
Figure 5: Product Specifications Diagram.
- Model Name: ILG8SF12V-T
- Brand: iLiving
- Style: 12" Fan w/ Thermostat
- Color: Silver
- Product Dimensions: 6.4"D x 15"W x 15"H
- Item Weight: 10.5 pounds
- Power Source: Electric
- Voltage: 120V
- Wattage: 70 watts
- Air Flow Capacity: 960 Cubic Feet Per Minute (CFM)
- Coverage Area: 1200 SQF
- Number of Blades: 3
- Blade Length: 12 Inches
- Blade Material: Aluminum
- Control Method: Remote (Thermostat) and Pull Chain
- Number of Power Levels: 3
- Thermostat Range: 32-130 °F
- Safety Certification: UL Listed
Warranty and Support
iLiving stands behind the quality of its products.
Warranty Information
This iLIVING fan comes with a 1-year limited component warranty. This warranty covers defects in materials and workmanship under normal use. Please retain your proof of purchase for warranty claims.
Customer Support
For any questions, technical assistance, or warranty inquiries, please contact iLiving customer support. Refer to the product packaging or the official iLiving website for the most current contact information.
Figure 6: iLIVING commitment to quality and support.
