Safety Information
Please read and understand all safety information before assembling or using this product. Failure to follow these instructions may result in injury or property damage.
- Weight Limit: Do not exceed the maximum weight limit of 360 pounds for the entire cabinet. Ensure items are distributed evenly on shelves.
- Wall Mounting: For enhanced stability and safety, especially in areas with children or pets, it is highly recommended to secure the cabinet to a wall using the provided pre-drilled holes and appropriate hardware (not always included, check package contents).
- Pinch Points: Keep fingers and other body parts clear of door hinges and closing mechanisms to prevent pinching injuries.
- Stability: Always ensure the cabinet is placed on a level, stable surface. Avoid placing heavy items on the top shelf without proper wall anchoring.
- Chemical Storage: If storing chemicals, ensure they are properly sealed, labeled, and stored according to their safety guidelines.
- Electrical Appliances: If placing electrical appliances on or in the cabinet, ensure proper grounding and ventilation.
Setup and Assembly
Your INTERGREAT Metal Storage Cabinet is designed for straightforward assembly. We recommend having two people for easier and safer installation. All parts are numbered for easy identification. A video tutorial is also available for visual guidance.
Unpacking and Part Identification
Carefully unpack all components and lay them out on a clean, soft surface to prevent scratches. Verify that all parts listed in the instruction manual are present and undamaged. Each part is typically labeled with a corresponding number or letter.
Image: Exploded view of the cabinet components, showing individual panels and hardware for assembly.
Image: Overview of the INTERGREAT Metal Storage Cabinet components laid out for assembly, alongside tools and the instruction manual.
Assembly Steps
Follow the numbered steps in your included instruction booklet. Ensure all screws are tightened securely but do not overtighten to avoid stripping. If you encounter difficulties, refer to the video tutorial below or contact customer support.
Video: Detailed assembly guide for the INTERGREAT 36-inch Metal Storage Cabinet. This video demonstrates each step of the construction process, from unpacking to final door installation.
Tip: Some users find it helpful to loosely assemble components first, then tighten all fasteners once the structure is complete to ensure proper alignment.
Operating Instructions
Adjustable Shelves
The cabinet features two adjustable shelves, allowing you to customize the internal storage space according to your needs. Each shelf can support up to 180 pounds when properly installed.
- To adjust a shelf, remove all items from the shelf.
- Locate the adjustable buckles on the side panels.
- Carefully lift and remove the shelf from its current position.
- Reinsert the shelf into the desired slots, ensuring it is level and securely seated on all four buckles.
Image: Close-up view of the INTERGREAT Metal Storage Cabinet highlighting the adjustable shelf mechanism and dimensions.
Image: Visual representation of the customizable and adjustable shelves within the INTERGREAT Metal Storage Cabinet, showing height adjustment and thickened steel plate construction.
Locking Mechanism
The cabinet is equipped with a 3-point locking system for enhanced security. Two keys are provided.
- To lock the cabinet, ensure both doors are fully closed.
- Insert one of the provided keys into the lock cylinder on the right door handle.
- Turn the key to engage the 3-point locking rods, securing both doors.
- Remove the key and store it in a safe place.
Image: Detailed view of the INTERGREAT Metal Storage Cabinet's 3-point locking system and handle with keys.
Door Operation
The cabinet doors open at a wide 180-degree angle, providing full access to the contents. The doors are designed for quiet operation.
Maintenance
To ensure the longevity and optimal performance of your INTERGREAT Metal Storage Cabinet, follow these simple maintenance guidelines:
- Cleaning: The cabinet features a dust-proof coating, making it easy to clean. Wipe surfaces with a soft, damp cloth and mild detergent. Avoid abrasive cleaners or harsh chemicals that could damage the finish.
- Corrosion Protection: Made from cold-rolled steel with a dust-proof coating, the cabinet offers strong corrosion and moisture resistance. However, avoid prolonged exposure to excessive moisture or corrosive substances to maintain its integrity.
- Lubrication: Periodically check door hinges and the locking mechanism for smooth operation. Apply a small amount of silicone-based lubricant if any stiffness is observed.
- Fastener Check: Regularly inspect all screws and fasteners to ensure they remain tight. Retighten as necessary to maintain structural stability.
Troubleshooting
If you encounter any issues with your INTERGREAT Metal Storage Cabinet, refer to the following common problems and solutions:
| Problem | Possible Cause | Solution |
|---|---|---|
| Cabinet is wobbly or unstable. | Loose fasteners; uneven floor; cabinet not anchored. | Ensure all screws are tightened. Place cabinet on a level surface or use shims. Securely anchor the cabinet to a wall using the pre-drilled holes. |
| Doors do not close properly or are misaligned. | Improper assembly; loose hinges; cabinet not level. | Check that the cabinet is level. Inspect hinges for tightness and adjust if necessary. Re-check assembly steps for correct panel orientation. |
| Locking mechanism is stiff or not engaging. | Lack of lubrication; misalignment of locking rods. | Apply a small amount of silicone-based lubricant to the lock and rods. Ensure doors are fully closed and aligned before attempting to lock. |
| Difficulty during assembly. | Unclear instructions; missing parts; incorrect orientation. | Refer to the detailed colored image instructions and the video installation tutorial. Double-check part numbers. If parts are missing or damaged, contact customer support. Avoid forcing components. |
Specifications
| Feature | Detail |
|---|---|
| Brand | INTERGREAT |
| Model Number | SMB |
| Product Dimensions | 16"D x 32"W x 36"H |
| Color | Black |
| Material | Cold Rolled Steel (0.8mm thickness) |
| Finish Type | Powder Coated |
| Number of Shelves | 2 Adjustable Shelves |
| Shelf Weight Capacity | 180 pounds per shelf |
| Total Weight Limit | 360 Pounds |
| Lock Type | 3-Point Lock with Key |
| Included Components | 2 Locking Keys, Adjustable Shelves |
| Mounting Type | Floor Mount, Wall Mount (pre-drilled holes) |
| Item Weight | 65 Pounds |
| Recommended Uses | Office, Garage, Home, Shop, Utility Rooms, Art & Crafts, Filing, Kitchen Pantry |
Warranty and Support
For warranty information, technical support, or assistance with missing/damaged parts, please contact INTERGREAT customer service directly. Refer to the contact information provided with your purchase or visit the official INTERGREAT website.
- Online Resources: Additional video installation tutorials and FAQs may be available on the INTERGREAT website.
- Contact: For specific inquiries, please reach out to the seller or manufacturer.
