1. About Your ARCADE Pro Stunt Scooter
The ARCADE Pro Stunt Scooter is engineered for durability and performance, designed for beginners and intermediate riders aged 7 and up, supporting weights up to 220 lbs. It features a robust construction with 3D-stamped forks, a custom neck, and smooth ABEC-7 bearings for a stable and quiet ride. The scooter is ideal for recreational riding and BMX freestyle tricks.
- Built Tough: Features strong 3D-stamped forks, a custom neck, smooth bearings, a solid deck, and a dynamic design.
- Stable & Quiet Glide: Equipped with ABEC-7 bearings, reinforced T-bars with 117mm TPR grips, and an 83-degree headtube for enhanced stability.
- Ready to Ride: Comes mostly pre-assembled, requiring only two bolts to be tightened. Includes a one-degree concave deck (17.5” x 4”) and IHC compression.
2. Setup and Assembly
Your ARCADE Pro Stunt Scooter is designed for quick and easy assembly. Most components are pre-assembled at the factory. Follow these steps to complete the setup:
- Unpack: Carefully remove all components from the packaging. Ensure all parts are present: scooter deck with wheels, handlebar, and any included tools.
- Attach Handlebar: Insert the handlebar into the fork assembly. Align the handlebar with the front wheel.
- Secure Handlebar: Use the provided Allen wrench to tighten the two bolts on the clamp that secures the handlebar. Ensure these bolts are tightened firmly and evenly to prevent any movement during use.
- Final Check: Before riding, verify that all bolts are tight and the handlebar is securely aligned with the front wheel.
3. Operating Instructions
To ensure a safe and enjoyable riding experience, please adhere to the following operating guidelines:
- Safety First: Always wear appropriate safety gear, including a helmet, knee pads, and elbow pads.
- Riding Surface: Ride on smooth, dry, and clear surfaces. Avoid uneven terrain, loose gravel, wet areas, or public roads with traffic.
- Foot Placement: Place one foot firmly on the deck and use the other foot to push off the ground. Once momentum is gained, place both feet on the deck.
- Steering: Steer by leaning and gently turning the handlebars in the desired direction.
- Braking: To slow down or stop, apply pressure to the rear brake with your foot. Practice braking at low speeds first.
- Weight & Age Limits: This scooter is designed for riders aged 7 and up, with a maximum weight limit of 220 lbs.
4. Maintenance
Regular maintenance will extend the life of your ARCADE Pro Stunt Scooter and ensure safe operation:
- Check Bolts: Periodically inspect and tighten all bolts, especially those on the handlebar clamp, wheels, and brake. Loose bolts can affect performance and safety.
- Wheels & Bearings: Check wheels for wear and tear. If wheels or bearings become noisy or do not spin freely, they may need cleaning, lubrication, or replacement. The scooter uses 100mm polycarbonate wheels, which can be switched for 110mm wheels if desired.
- Grip Tape: Keep the grip tape clean and free of dirt or debris to maintain traction. Use a stiff brush to remove stubborn dirt.
- Brake: Inspect the custom nylon brake with steel insert for wear. Ensure it functions effectively. Replace if worn or damaged.
- Cleaning: Wipe down the scooter with a damp cloth after use. Avoid using harsh chemicals that could damage the finish.
5. Troubleshooting
Here are solutions to common issues you might encounter:
- Loose Handlebars: If the handlebars feel loose or wobble, re-tighten the two bolts on the handlebar clamp using an Allen wrench. Ensure they are very secure.
- Squeaky Wheels/Bearings: This often indicates dirt or lack of lubrication. Clean the wheels and bearings. If the noise persists or performance is affected, consider replacing the bearings or wheels.
- Ineffective Brake: Check the brake pad for wear. If it's worn, it may need replacement. Ensure the brake mechanism is free of obstructions and properly aligned.
- General Instability: Double-check all connections and bolts for tightness. Ensure the handlebar is perfectly aligned with the front wheel.
6. Specifications
| Feature | Detail |
|---|---|
| Brand | ARCADE |
| Model Name | Pro |
| Model Number | A5000 |
| Age Range (Recommended) | Kid (7+ years) |
| Weight Limit | 220 Pounds |
| Item Weight | 7.5 Pounds |
| Product Dimensions (L x W x H) | 27"L x 4"W x 32.5"H |
| Number of Wheels | 2 |
| Wheel Material | Polyurethane |
| Wheel Size | 100 Millimeters (upgradeable to 110mm) |
| Frame Material | Aluminum |
| Handlebar Type | Fixed T-bar (22.5 Inches high) |
| Grip Type | TPR |
| Brake Style | Rear Braking (Custom nylon with steel insert) |
| Suspension Type | Rigid |
| Included Components | Scooter |
7. Warranty and Support
ARCADE stands behind the quality of its products. Your ARCADE Pro Stunt Scooter comes with the following:
- Manufacturer Warranty: A 2-year manufacturer warranty.
- Satisfaction Guarantee: A 30-day money-back guarantee.
For any questions, concerns, or support needs, please contact our USA-based customer service department. Refer to your purchase documentation for specific contact details.