1. Introduction
This manual provides essential information for the safe and efficient operation, installation, and maintenance of your Mirage Inverter X Air Conditioner, Model 3. Please read this manual thoroughly before using the unit and retain it for future reference.
2. Safety Information
Important Safety Instructions:
- Ensure the unit is installed by a qualified professional in accordance with local electrical and building codes.
- Do not operate the air conditioner with wet hands or when standing on a wet surface.
- Disconnect power before performing any maintenance or cleaning.
- Keep children away from the unit and do not allow them to play with the controls.
- Do not insert objects into the air outlet or inlet.
- Use only the specified refrigerant (R-410A).
3. Product Overview
The Mirage Inverter X Air Conditioner is a compact, wall-mounted mini-split system designed for efficient cooling. It features Inverter technology for stable temperature control and energy efficiency.
Figure 3.1: Front view of the Mirage Inverter X indoor air conditioner unit. The unit is white with the "Mirage" logo on the left and "INVERTER X" on the right.
Key Features:
- Inverter Compressor for enhanced efficiency and stable temperature.
- 1 Ton (12,000 BTU) cooling capacity.
- SEER16 rating for energy savings.
- Antimicrobial Air Filter for improved air quality.
- Designed for 220V electrical systems.
4. Setup and Installation
Installation of this air conditioning unit requires specialized tools and knowledge. It is strongly recommended that installation be performed by a certified HVAC technician to ensure proper function, safety, and warranty validity.
General Installation Considerations:
- Location: Choose a location for the indoor unit that allows for optimal air distribution and easy access for maintenance. The outdoor unit should be placed on a stable surface with adequate clearance for airflow.
- Electrical Connection: The unit requires a dedicated 220V power supply. Ensure the electrical circuit meets the unit's power requirements and is protected by appropriate circuit breakers.
- Refrigerant Piping: Proper sizing and installation of refrigerant lines are crucial for system performance. The system uses R-410A refrigerant.
- Drainage: Ensure proper condensate drainage to prevent water damage.
5. Operating Instructions
Your Mirage Inverter X Air Conditioner is controlled via a remote control. Familiarize yourself with the remote's functions for optimal use.
Basic Operation Modes:
- Cool Mode: Sets the unit to cool the room to the desired temperature.
- Fan Mode: Circulates air without cooling or heating.
- Dry Mode: Reduces humidity in the room.
- Auto Mode: Automatically selects the operating mode based on the room temperature.
- Temperature Setting: Use the temperature adjustment buttons to set your desired room temperature.
Refer to your remote control's specific manual for detailed instructions on advanced features such as timer settings, sleep mode, and fan speed adjustments.
6. Maintenance
Regular maintenance ensures the longevity and efficiency of your air conditioner. Always disconnect power to the unit before performing any maintenance.
Filter Cleaning:
- Open the front panel of the indoor unit.
- Carefully remove the antimicrobial air filter(s).
- Clean the filter(s) using a vacuum cleaner or wash with lukewarm water and a mild detergent. Rinse thoroughly.
- Allow the filter(s) to dry completely in a shaded area before reinserting.
- Close the front panel.
Frequency: Clean filters every two weeks or more frequently depending on usage and air quality.
General Cleaning:
- Wipe the exterior of the indoor and outdoor units with a soft, damp cloth. Do not use harsh chemicals or abrasive cleaners.
- Ensure the outdoor unit's coils are free from debris (leaves, dirt). This may require professional cleaning.
Professional Servicing: It is recommended to have your unit professionally serviced annually to check refrigerant levels, clean coils, and inspect electrical components.
7. Troubleshooting
Before contacting customer support, review the following common issues and solutions:
| Problem | Possible Cause | Solution |
|---|---|---|
| Unit does not start | No power; circuit breaker tripped; remote control batteries low. | Check power supply; reset circuit breaker; replace remote control batteries. |
| Insufficient cooling | Dirty air filter; blocked outdoor unit; wrong mode selected; temperature setting too high. | Clean air filter; clear obstructions from outdoor unit; select Cool mode; lower temperature setting. |
| Unusual noise | Loose parts; foreign objects; unit not level. | Inspect for loose parts; remove foreign objects; ensure unit is level. If noise persists, contact service. |
| Water leakage from indoor unit | Blocked drain pipe; improper installation. | Check and clear drain pipe; contact installer for inspection. |
If the problem persists after attempting these solutions, please contact qualified service personnel.
8. Specifications
| Feature | Detail |
|---|---|
| Brand | Mirage |
| Model Number | 3 |
| Capacity | 1 Ton (12,000 BTU) |
| Voltage | 220 Volts |
| Power/Wattage | 230 |
| Seasonal Energy Efficiency Ratio (SEER) | 16 |
| Special Feature | Inverter Compressor |
| Refrigerant | R-410A |
| Filter Type | Antimicrobial Air Filter |
| Product Dimensions (Indoor Unit) | 27D x 70W x 83H Centimetres |
| Item Weight | 10.6 kg |
| Color | White |
9. Warranty and Support
For warranty information and customer support, please refer to the documentation provided with your purchase or contact Mirage customer service. Keep your proof of purchase for warranty claims.
For technical assistance or service requests, please have your model number (Model 3) and serial number ready when contacting support.
