RubyLux R001

Download PDF
Contents

RubyLux BioNase LED Nasal Therapy Device

Model: R001

Introduction

The RubyLux BioNase is a portable LED light therapy device designed to provide relief from nasal discomfort. It utilizes specific LED wavelengths to support nasal health. This manual provides essential information for the safe and effective use of your device.

Safety Information

Please read all safety instructions before using the RubyLux BioNase device.

  • Consult a healthcare professional before use if you have any pre-existing medical conditions, are pregnant, or are taking photosensitizing medications.
  • Do not use this device for severe medical conditions without professional medical advice.
  • Keep the device out of reach of children.
  • Do not look directly into the LED lights during operation.
  • Ensure the device is dry before use and storage. Do not immerse the device or its components in water.
  • Use only the specified 9-volt battery. Incorrect battery usage may cause damage or injury.
  • The LED wavelength is 660nm.

Package Contents

Verify that all items are present in your package:

  • RubyLux BioNase Main Unit
  • Nose Piece with Red LED Lights (2 units)
  • Instruction Manual (this document)

Note: A standard 9-volt battery is required and sold separately.

Setup

Installing the Battery

  1. Locate the battery compartment on the back of the main BioNase unit.
  2. Open the compartment cover.
  3. Insert one 9-volt battery, ensuring correct polarity (+ and - terminals match).
  4. Close the battery compartment cover securely.

Attaching the Nose Piece

  1. Connect the cable from the LED nose piece to the designated port on the main BioNase unit.
  2. Ensure a firm connection.
RubyLux BioNase main unit with nose piece cable

Image: The RubyLux BioNase main unit connected to the LED nose piece.

Close-up of RubyLux BioNase LED nose inserts

Image: A close-up view of the red LED nose inserts.

Operating Instructions

Using the Device

  1. Ensure the device has a working 9-volt battery installed and the nose piece is connected.
  2. Lie down or sit in a comfortable, relaxed position.
  3. Gently insert the LED nose piece into your nostrils.
  4. Press the green button on the main BioNase unit to start the treatment. The LED lights will illuminate.
  5. Each treatment session lasts approximately 5 minutes. The device will automatically turn off after this duration.
  6. After the session, gently remove the nose piece from your nostrils.

Usage Frequency

The BioNase device can be used up to 4 times per day. Allow several hours between sessions for optimal results.

Person using the RubyLux BioNase device

Image: A person demonstrating the use of the RubyLux BioNase device by inserting the LED nose piece into their nostrils.

Maintenance

Cleaning

After each use, gently wipe the LED nose piece with a soft, damp cloth. Do not submerge the device or nose piece in water. A mild disinfectant can be used if necessary, ensuring the device is completely dry before storage.

Storage

Store the device in a cool, dry place, away from direct sunlight and extreme temperatures. If storing for extended periods, remove the 9-volt battery to prevent leakage.

Troubleshooting

ProblemPossible CauseSolution
Device does not turn onBattery is dead or incorrectly insertedReplace the 9-volt battery and check polarity.
LED lights flickerLoose connection or low batteryEnsure the nose piece cable is firmly connected. Replace the battery.
Device turns off prematurelyBattery is lowReplace the 9-volt battery.

If issues persist after attempting these solutions, please contact customer support.

Specifications

FeatureDetail
ModelR001
Dimensions (L x W x H)10.16 x 7.62 x 2.54 cm (4 x 3 x 1 inches)
Weight91 g (3.2 oz)
Power Source1 x 9V Battery (not included)
LED Wavelength660 nm
Light Output4 mW/cm², 5 Joules
MaterialPlastic
ColorRed
UPC650726998145
ASINB07SFXLD2G

Warranty and Support

For warranty information or technical support, please refer to the contact details provided on the RubyLux official website or the product packaging. Keep your purchase receipt for warranty claims.

Documents and downloads

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.