1. Introduction
Thank you for choosing the AURLANE MIR012 LED Bathroom Mirror. This manual provides essential information for the safe installation, operation, and maintenance of your new mirror. Please read these instructions carefully before installation and keep them for future reference.
The MIR012 is a modern wall-mounted bathroom mirror featuring integrated peripheral LED lighting, a built-in digital clock, and a durable anodized aluminum frame. It is designed to provide optimal visibility and convenience in bathroom environments.
2. Safety Information
- Electrical Safety: Installation must be performed by a qualified electrician in accordance with all local electrical codes and regulations. Ensure the power supply is disconnected before installation or maintenance.
- Bathroom Zones: This mirror is rated IP24 (protection against splashing water) and is suitable for installation in Bathroom Volume 2 and 3. Do not install in Bathroom Volume 0 or 1 where direct water spray is likely.
- Handling: Mirrors are fragile. Handle with care to prevent breakage and injury.
- Cleaning: Use only soft, damp cloths and mild, non-abrasive cleaners. Avoid harsh chemicals that may damage the mirror surface or frame.
- LEDs: Do not attempt to replace the integrated LED lighting. Contact qualified personnel for service if the LEDs malfunction.
3. Package Contents
Verify that all components are present before beginning installation.
- AURLANE MIR012 LED Bathroom Mirror (1 unit)
- Mounting hardware (screws, wall plugs - may vary by region, ensure suitable hardware for your wall type is used)
- User Manual (this document)
4. Product Features
- Integrated peripheral LED lighting system for optimal visibility.
- Built-in digital clock display.
- Touch-sensitive power button for lighting control.
- Anodized aluminum frame with silver coating.
- Energy efficiency class A+.
- IP24 rating, suitable for bathroom environments.
5. Setup and Installation
The AURLANE MIR012 mirror is designed for wall-mounted installation. Professional installation is highly recommended.
- Preparation: Ensure the wall surface is clean, dry, and capable of supporting the mirror's weight (approximately 11 pounds / 5 kg). Identify the desired mounting location, considering electrical connections and bathroom zoning regulations.
- Marking: Carefully measure and mark the drilling points on the wall according to the mirror's mounting brackets. Use a level to ensure horizontal alignment.
- Drilling: Drill holes at the marked points using an appropriate drill bit for your wall type. Insert wall plugs if necessary.
- Wiring: Ensure the main power supply is OFF at the circuit breaker before proceeding. Connect the mirror's electrical wiring to the designated power supply in accordance with local electrical codes. This step must be performed by a qualified electrician.
- Mounting: Secure the mounting hardware to the wall. Carefully lift the mirror and attach it to the wall mounts, ensuring it is securely seated and stable.
- Final Check: Once mounted, restore power and test the mirror's functions.
Image 1: AURLANE MIR012 LED Bathroom Mirror, illustrating its design and wall-mounted appearance. The mirror features a bright LED border and a digital clock display in the lower right corner.
6. Operating Instructions
The AURLANE MIR012 mirror is designed for simple operation.
- Powering On/Off the LED Light: Locate the touch-sensitive button on the mirror surface (typically indicated by a power symbol). A single touch will turn the LED light on or off.
- Digital Clock: The integrated digital clock will display the time. Specific instructions for setting the time are not provided in the product specifications, but typically involve a long press or multiple presses on the touch button, or a separate small button on the back of the mirror. Refer to any supplementary documentation or contact customer support if specific clock setting instructions are required.
Image 2: Close-up view of the AURLANE MIR012 mirror's lower right section, highlighting the touch-sensitive power button and the integrated digital clock displaying '17:57'.
7. Maintenance
Regular cleaning and care will ensure the longevity and appearance of your mirror.
- Cleaning the Mirror Surface: Use a soft, lint-free cloth dampened with water or a non-abrasive glass cleaner. Spray cleaner onto the cloth, not directly onto the mirror, to prevent liquid from seeping into the edges or electrical components. Wipe gently to avoid streaks.
- Cleaning the Frame: Wipe the anodized aluminum frame with a soft, damp cloth. Avoid abrasive cleaners or scouring pads that could scratch the finish.
- Electrical Components: Ensure the mirror is disconnected from power before cleaning any electrical components or areas near wiring. Do not spray liquids directly onto the mirror's electrical parts.
- Inspection: Periodically check the mounting hardware for tightness and ensure the mirror remains securely attached to the wall.
8. Troubleshooting
If you encounter issues with your AURLANE MIR012 mirror, refer to the following common solutions:
- LED Light Does Not Turn On:
- Check if the main power supply to the mirror is active.
- Ensure the touch button is being pressed correctly.
- Verify that the electrical connections are secure (consult a qualified electrician if unsure).
- Digital Clock Not Displaying:
- Confirm the mirror has power.
- If the clock has a separate power source (e.g., battery), check it.
- Mirror Flickers or Malfunctions:
- Turn off the power to the mirror at the circuit breaker for a few minutes, then restore power. This can sometimes reset the internal electronics.
- If the issue persists, contact customer support.
9. Specifications
| Brand | AURLANE |
| Model Number | MIR012 |
| Dimensions (L x W x H) | 27.56 x 35.43 x 1.97 inches (70 x 90 x 5 cm) |
| Item Weight | 11 pounds (5 kg) |
| Material | Aluminum (Frame) |
| Mounting Type | Wall Mount |
| LED Power | 5W |
| Luminous Flux | 821 Lumens |
| Energy Efficiency Class | A+ |
| IP Rating | IP24 |
| Room Type | Bathroom |
| Special Features | Illuminated, Digital Clock |
Image 3: Energy label for the AURLANE MIR012 mirror, indicating an energy efficiency class of A+.
10. Warranty and Support
AURLANE products are manufactured to high-quality standards. For warranty information, technical support, or service inquiries, please refer to the retailer where the product was purchased or visit the official AURLANE website. Please have your model number (MIR012) and proof of purchase available when contacting support.
