Introduction
This user manual provides important information for the safe and efficient operation of your PELONIS 16-Inch Oscillating Pedestal Stand Up Fan. This fan is equipped with a quiet DC motor, offering 12 speed settings, a 12-hour timer, and remote control functionality. Its adjustable height and wide oscillation angle ensure optimal air circulation for various room types, including bedrooms, living rooms, and home offices.
Key features include ultra-quiet operation (as low as 38 dB), high energy efficiency, powerful wind delivery with 5 high-quality blades, an 85° oscillation angle, and a 24° tilt angle. It also features a blue LED display and auto power-off functions for convenience and safety.
Safety Information
Always read and follow all safety instructions before using this appliance to prevent injury or damage. Keep the fan on a stable, flat surface. Ensure the safety grid is properly installed to prevent accidental contact with moving parts. The built-in overheat protection will automatically switch off the fan if the motor overheats.
The intensive safety fence provides protection against accidental contact with the fan blades.
Setup Instructions
Follow these steps to assemble your PELONIS Pedestal Fan:
- Attach the base to the main pole. Ensure it is securely fastened.
- Adjust the height of the fan pole to your desired level (between 3.5 and 4 feet) and tighten the knob.
- Install the rear grill onto the motor unit, aligning the guard catch.
- Attach the fan blade to the motor shaft. Pull the blade to rotate it after installing to ensure it can be normally rotated.
- Secure the blade with the lock nut of the blade by turning it anticlockwise.
- Install the front grill, pressing the guards sequentially with both hands until it clicks into place.
Visual guide for fan assembly steps.
Assembly Video Guides:
Official Unboxing and Assembly Guide: This video provides a detailed unboxing and assembly process for the Pelonis Pedestal Fan, guiding you through each step.
Product Reveal and Assembly Overview: A quick look at the fan components and initial assembly steps.
Common Assembly Challenges: This video highlights potential difficulties during assembly, particularly with attaching the fan grills, offering insights into common user experiences.
Operating Instructions
Your PELONIS fan offers versatile control options for personalized comfort:
- Power On/Off: Use the power button on the fan's control panel or the remote control.
- Speed Settings: Choose from 12 speed settings to customize airflow. The DC motor ensures ultra-quiet operation even at higher speeds.
- Oscillation: Activate the oscillation function for widespread air distribution (85° horizontal oscillation). You can stop the oscillation at any desired angle.
- Tilt Adjustment: Manually adjust the fan head's tilt angle up to 24° for targeted airflow.
- Timer: Set the 12-hour timer for automatic shut-off, conserving energy and providing convenience.
- Remote Control: All functions can be conveniently controlled from up to 6 meters away using the included remote control.
Customize your comfort with 12-speed settings.
Achieve widespread air distribution with 90° oscillation and 24° tilt.
Easily operate your fan with the convenient remote control.
Fan Operation and Features Overview: This video demonstrates the fan's quiet operation, speed settings, and oscillation feature, highlighting its long-term reliability.
Maintenance
Regular cleaning ensures optimal performance and longevity of your fan. The fan grill is designed for easy removal to facilitate cleaning of the blades and internal components. The manufacturer recommends hand washing the grill and blades.
- Unplug the fan from the power outlet before cleaning.
- Remove the front grill by releasing its clips or screws.
- Carefully remove the fan blade.
- Wipe the blades and grills with a soft, damp cloth. For stubborn dust, hand wash with mild soap and water.
- Ensure all parts are completely dry before reassembling.
- Wipe down the exterior of the fan with a dry cloth.
The integrated carry handle makes it easy to move the fan for cleaning or relocation.
Troubleshooting
If you encounter issues with your PELONIS fan, refer to the following common problems and solutions:
| Problem | Possible Cause | Solution |
|---|---|---|
| Fan does not turn on. | No power, loose connection, or tripped circuit breaker. | Check power cord connection, wall outlet, and circuit breaker. |
| Fan is noisy. | Loose parts, dust accumulation on blades, or unstable base. | Ensure all parts are securely assembled. Clean blades and grills. Place fan on a stable surface. |
| Fan does not oscillate. | Oscillation function not activated or obstruction. | Press the oscillation button. Check for any obstructions preventing movement. |
| Remote control not working. | Dead batteries or obstruction between remote and fan. | Replace remote batteries. Ensure clear line of sight to the fan's receiver. |
| Difficulty assembling. | Misalignment of parts, especially grills. | Refer to the Setup section and assembly videos for detailed guidance on aligning and securing components. |
Specifications
| Feature | Detail |
|---|---|
| Brand | PELONIS |
| Model Name | FS40-19PRD |
| Color | White |
| Product Dimensions | 15.75"D x 15.75"W x 51.18"H |
| Item Weight | 12.35 Pounds |
| Power Source | AC |
| Voltage | 120 Volts |
| Number of Power Levels | 12 |
| Noise Level | 38 Sones |
| Oscillation Angle | 85° |
| Tilt Angle | 24° |
| Timer | 12-Hour |
| Control Method | Remote |
| Number of Blades | 5 |
| Blade Material | Plastic |
| Assembly Required | Yes |
Warranty and Support
PELONIS offers a 1-year manufacturer warranty with the purchase of this product, demonstrating confidence in its quality and durability.
For further assistance, please refer to the official user manual PDF available online:
