1. Introduction
This manual provides essential information for the safe installation, operation, and maintenance of your AURLANE MIR009 LED Bathroom Mirror. Please read these instructions thoroughly before installation and retain them for future reference.
The AURLANE MIR009 is a round, wall-mounted LED bathroom mirror designed to provide optimal visibility with integrated lighting. It features an anodized aluminum frame with a silver coating and a touch-sensitive on/off button for the LED light.
Image 1.1: The AURLANE MIR009 LED Bathroom Mirror, showcasing its illuminated round design and touch button, installed in a modern bathroom setting above a white sink.
2. Safety Information
- Ensure the power supply is disconnected before installation, maintenance, or cleaning.
- Installation must be performed by a qualified electrician in accordance with local wiring regulations.
- This mirror is rated Class 2 IP24, suitable for installation in bathroom volumes 2 and 3. Consult local electrical codes for specific zone requirements.
- Do not expose the mirror to excessive moisture or direct water spray.
- Do not attempt to modify or repair the mirror. Contact qualified service personnel for assistance.
- Keep packaging materials out of reach of children to prevent choking hazards.
3. Package Contents
Please check that all components are present and undamaged before proceeding with installation:
- AURLANE MIR009 LED Bathroom Mirror (1 unit)
- Mounting hardware (screws, wall plugs)
- Instruction Manual (this document)
4. Setup and Installation
Assembly is required for this product. Professional installation is recommended.
- Choose Location: Select a suitable wall location in your bathroom, ensuring it is within the permitted electrical zones (Volume 2 or 3) for IP24 rated products.
- Mark Mounting Points: Hold the mirror against the wall at the desired height and use a pencil to mark the positions for the mounting screws. Ensure the mirror is level.
- Drill Holes: Drill holes at the marked positions using an appropriate drill bit for your wall type. Insert the provided wall plugs.
- Electrical Connection: Ensure the main power supply to the circuit is OFF. Connect the mirror's electrical wiring to the household electrical supply according to local electrical codes. This mirror is a Class 2 appliance.
- Mount Mirror: Carefully align the mirror's mounting brackets with the installed screws/wall plugs and secure the mirror firmly to the wall.
- Restore Power: Once the mirror is securely mounted and all electrical connections are verified, restore power to the circuit.
Image 4.1: The AURLANE MIR009 LED Bathroom Mirror mounted on a wall, illustrating its integration into a bathroom environment. This image can serve as a visual reference for placement.
5. Operating Instructions
The AURLANE MIR009 LED Bathroom Mirror features a simple touch-sensitive button for controlling the integrated LED lighting.
- Turning On/Off: Gently touch the power symbol (⏻) located on the mirror surface to turn the LED light on or off.
Image 5.1: A detailed view of the touch-sensitive power button (⏻) on the mirror's surface, which controls the LED lighting.
6. Maintenance
To ensure the longevity and optimal performance of your AURLANE MIR009 LED Bathroom Mirror, follow these maintenance guidelines:
- Cleaning the Mirror Surface: Use a soft, lint-free cloth and a non-abrasive glass cleaner. Spray the cleaner onto the cloth, not directly onto the mirror, to avoid liquid seeping into the electrical components.
- Cleaning the Frame: Wipe the anodized aluminum frame with a soft, damp cloth. Avoid harsh chemicals or abrasive materials that could damage the finish.
- Electrical Components: Do not attempt to clean or tamper with the internal electrical components. Ensure the mirror is dry before restoring power after cleaning.
- LED Longevity: The integrated LEDs are designed for long life and do not require replacement under normal use.
7. Troubleshooting
If you encounter issues with your AURLANE MIR009 LED Bathroom Mirror, refer to the following common troubleshooting steps:
- LED Light Does Not Turn On:
- Check if the main power supply to the mirror's circuit is active.
- Ensure the touch button is being pressed correctly.
- If the issue persists, consult a qualified electrician.
- Mirror Surface Appears Dim or Flickering:
- Verify stable power supply.
- Contact customer support if the problem continues.
8. Specifications
Technical details for the AURLANE MIR009 LED Bathroom Mirror:
| Feature | Specification |
|---|---|
| Model Number | MIR009 |
| Brand | AURLANE |
| Product Dimensions | 23.23"L x 23.23"W (Diameter 59 cm) |
| Shape | Round |
| Frame Material | Anodized Aluminum |
| Finish Type | Silver Coating |
| Mounting Type | Wall Mount |
| Special Feature | Lighted, Touch Sensor |
| LED Lighting Power | 3W |
| Luminous Flux | 504 LM |
| Energy Efficiency Class | A+ |
| Electrical Class | Class 2 |
| IP Rating | IP24 |
| Item Weight | 5 Kilograms (11 pounds) |
| Assembly Required | Yes |
Image 8.1: Energy efficiency label for the AURLANE MIR009, indicating an A+ rating and 2.5 kWh/1000h consumption.
9. Warranty and Support
AURLANE products are manufactured to high-quality standards. For information regarding warranty coverage, please refer to the warranty card included with your purchase or visit the official AURLANE website.
For technical support, replacement parts, or any inquiries not covered in this manual, please contact AURLANE customer service through their official channels.
