1. Introduction
This manual provides essential instructions for the safe and efficient operation, setup, and maintenance of your GBC ShredMaster PX10-06 Super Cross-Cut Shredder. Please read this manual thoroughly before using the shredder and retain it for future reference.
The GBC ShredMaster PX10-06 is designed for home office use, providing P-4 level confidential security by shredding documents into 3/16" x 1 1/2" super cross-cut pieces. It can shred up to 10 sheets of paper simultaneously and features a 6-gallon waste bin.
Image 1.1: Front view of the GBC ShredMaster PX10-06 Home Office Shredder.
Image 1.2: Illustration of the Super Cross-Cut (P-4) security level, showing shredded paper size compared to a coin.
2. Important Safety Information
To reduce the risk of injury or damage, observe the following safety precautions:
- Keep loose clothing, jewelry, hair, and hands away from the paper entry slot.
- Do not allow children or pets near the shredder.
- Always unplug the shredder before moving, cleaning, or emptying the waste bin.
- Do not spray aerosols or lubricants into the shredder.
- Do not shred metal objects, plastic, or adhesive materials other than specified.
- The shredder features recessed blades to help prevent user injury. However, exercise caution during operation.
- This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm (Proposition 65 warning).
3. Package Contents
Verify that all items are present in the package:
- GBC ShredMaster PX10-06 Paper Shredder Unit (Shredder Head and Waste Bin)
- Instruction Manual (this document)
4. Setup
- Unpacking: Carefully remove all components from the packaging. The shredder head is typically packed upside down inside the waste bin for shipping.
- Assembly: Invert the shredder head and place it securely on top of the waste bin. Ensure it is properly seated.
- Placement: Position the shredder on a flat, stable surface. The front-facing design is optimal for placement beside a desk. Ensure adequate ventilation around the unit.
- Power Connection: Plug the power cord into a standard electrical outlet.
5. Operating Instructions
5.1 Powering On/Off
- Locate the main power switch on the back of the shredder and turn it to the "ON" position.
- On the control panel, press and hold the power button for approximately three seconds. The blue indicator light will blink. Wait for the blue light to become solid, indicating the shredder is ready for operation.
- To turn off, press and hold the power button again until the light turns off, then switch off the main power switch.
5.2 Shredding Documents
- Ensure the shredder is powered on and the blue indicator light is solid.
- Insert up to 10 sheets of paper into the paper entry slot. The shredder will automatically start shredding.
- The shredder can also shred staples and small paperclips.
- Do not exceed the maximum sheet capacity to prevent jams and motor strain.
- The shredder has a continuous run time of 6 minutes. After this period, it may require a cool-down period to prevent overheating.
Image 5.1: User operating the GBC ShredMaster PX10-06 shredder.
Image 5.2: The shredder's capability to shred up to 10 sheets, staples, and paperclips.
6. Maintenance
6.1 Emptying the Waste Bin
- Always turn off and unplug the shredder before emptying the waste bin.
- Carefully lift the shredder head off the waste bin.
- Dispose of the shredded paper. The 6-gallon bin provides ample capacity, reducing the frequency of emptying.
- Replace the shredder head securely onto the waste bin.
Image 6.1: The 6-gallon waste bin, illustrating its capacity for shredded materials.
6.2 Cleaning
- With the shredder unplugged, wipe the exterior with a soft, dry cloth.
- Do not use abrasive cleaners or solvents.
7. Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Shredder does not turn on. |
|
|
| Shredder motor runs but paper does not shred, or jams frequently. |
|
|
| Shredder stops during operation and will not restart immediately. |
|
|
| Blue indicator light blinks but shredder does not operate. |
|
|
8. Specifications
| Feature | Detail |
|---|---|
| Model Number | PX10-06 |
| Shred Type | Super Cross-Cut |
| Security Level | P-4 (3/16" x 1 1/2" particles) |
| Sheet Capacity | Up to 10 sheets (20lb bond paper) |
| Shreds | Paper, Staples, Paperclips |
| Waste Bin Capacity | 6 Gallons |
| Continuous Run Time | 6 minutes |
| Cool Down Time | Approximately 30 minutes (after 6 min run time) |
| Noise Level | Below 62 dBA (Whisper Shred Technology) |
| Special Features | Jam-Stop Auto Reverse Technology, Quiet Operation, Touch Control, Recessed Blades |
| Item Weight | 14.3 pounds |
| Product Dimensions | 14.37 x 10.04 x 16.06 inches |
| Size (Approx.) | 16" x 9.4" x 14" |
9. Warranty and Support
For warranty information and technical support, please refer to the manufacturer's official website or contact GBC customer service directly. Keep your purchase receipt as proof of purchase.
GBC Official Website: www.gbc.com
