Introduction
This manual provides detailed instructions for the installation, operation, and maintenance of your DiO Connected Home Roller Shutter Module Set (Model 54852). This set allows you to control your electric roller shutters individually or centrally using the included 3-channel remote control. For advanced scheduling and smartphone control, integration with a DiO LiteBox or DiO home automation gateway is required (sold separately).
Image: DiO Connected Home Roller Shutter Modules and 3-Channel Remote Control. This image displays the two white square modules and the black rectangular remote control, illustrating the main components of the product set.
Package Contents
Please verify that all items are present in your package:
- 2 x DiO Roller Shutter Modules
- 1 x DiO 3-Channel Remote Control
Setup and Installation
Installation of the DiO roller shutter modules requires electrical wiring knowledge. If you are unsure, consult a qualified electrician. Ensure the main power supply is disconnected before beginning installation.
- Power Disconnection: Turn off the main power supply to the circuit where the roller shutters are connected.
- Module Wiring: Connect the DiO module to your electric roller shutter motor and power supply according to the wiring diagram. The module typically connects to the Live (L), Neutral (N), Up, and Down wires of your roller shutter motor.
- Secure Placement: Place the module securely within the electrical box or housing, ensuring no wires are pinched.
- Power Reconnection: Restore power to the circuit.
- Remote Control Pairing:
- Press the pairing button on the DiO module (refer to the module for exact location, usually a small button or LED indicator).
- Within 10 seconds, press the 'ON' or 'UP' button on the desired channel of your 3-channel remote control.
- The module should respond (e.g., the shutter moves slightly or an LED flashes) to confirm successful pairing.
- Test Operation: Test the roller shutter operation using the paired remote control.
Image: DiO Roller Shutter Module Wiring Diagram and Features. This diagram illustrates the electrical connections for the module (230V, Max. 500W) and shows the remote control with its CR2032 3V battery. It also highlights the 3+1 channels group functionality and a 2-year warranty.
Operating Instructions
The 3-channel remote control allows for easy operation of your connected roller shutters.
- Individual Control: Use the numbered buttons (1, 2, 3) on the remote control to select a specific channel (and thus a specific module/shutter).
- Up/Open: Press the UP button (usually indicated by an upward arrow or 'ON') for the selected channel to open the roller shutter.
- Down/Close: Press the DOWN button (usually indicated by a downward arrow or 'OFF') for the selected channel to close the roller shutter.
- Stop: Press the STOP button (usually indicated by a square or 'STOP') to halt the roller shutter at any desired position.
- Group Control: The remote control features a group function. Press the GROUP button (often labeled 'G' or a similar symbol) to control all paired roller shutters simultaneously. Then use the UP, DOWN, or STOP buttons to operate the group.
Image: DiO 3-Channel Remote Control and Modules. This image shows the black remote control with its distinct channel buttons (1, 2, 3) and group button, alongside the two white roller shutter modules, illustrating the control interface.
Maintenance
The DiO roller shutter modules and remote control are designed for low maintenance. Follow these guidelines to ensure longevity:
- Cleaning: Wipe the remote control and visible parts of the modules with a soft, dry cloth. Do not use liquid cleaners or abrasive materials.
- Battery Replacement: The remote control uses a CR2032 3V battery. Replace the battery when the remote's range decreases or it becomes unresponsive. Refer to the remote control's battery compartment for instructions on replacement.
- Environmental Conditions: Ensure the modules are installed in a dry environment, protected from moisture and extreme temperatures.
Troubleshooting
If you encounter issues with your DiO roller shutter module set, refer to the following common problems and solutions:
| Problem | Possible Cause | Solution |
|---|---|---|
| Shutter does not respond to remote control. |
|
|
| Shutter moves erratically or stops unexpectedly. |
|
|
| Group control not working. |
|
|
Specifications
| Feature | Detail |
|---|---|
| Model Number | 54852 |
| Brand | DiO Connected Home |
| Dimensions (L x W x H) | 18.3 x 15.5 x 2.6 cm (Product packaging dimensions) |
| Weight | 150 grams |
| Material | Plastic |
| Operating Voltage | 230 Volts |
| Max Wattage | 500 Watts |
| Current Rating | 10 A |
| Operating Mode | ON-NONE-OFF |
| Switch Type | Momentary (SPST), Remote Control |
| Connector Type | Plug-in |
| Contact Type | Normally Closed |
| Wireless Frequency | DiO 1.0 - RF 433.92MHz |
| Range | Up to 50 meters in open field |
| Remote Battery | CR2032 3V (for remote control) |
Warranty and Support
The DiO Connected Home Roller Shutter Module Set (Model 54852) comes with a 2-year warranty from the date of purchase. This warranty covers manufacturing defects under normal use. Please retain your proof of purchase for warranty claims.
For technical support, troubleshooting assistance beyond this manual, or warranty inquiries, please contact DiO Connected Home customer service. Visit the official DiO Connected Home website for contact information or refer to the product packaging.
Online Resources: For additional information and product updates, you may visit the DiO Connected Home Brand Store.
