Clairol Professional Permanent Liquicolor Hair Color Instruction Manual

1. Introduction

This manual provides comprehensive instructions for the safe and effective use of Clairol Professional Permanent Liquicolor Hair Color. This product is designed for professional use and offers 100% gray coverage with SOY4PLEX technology, providing up to 84% more deep conditioning and 61% more shine compared to untreated hair.

Please read all instructions carefully before beginning the application process.

2. Important Safety Information

WARNING: Hair colorants can cause severe allergic reactions. Read and follow instructions.

• Perform a skin allergy test 48 hours before each use of this product, even if you have previously used coloring products.
• Do not use if you have a rash on your face or sensitive, irritated, or damaged scalp.
• Do not use if you have experienced a reaction to a temporary 'black henna' tattoo in the past.
• Wear suitable gloves during preparation, application, and rinsing of the product.
• Avoid contact with eyes. Rinse eyes immediately if product comes into contact with them.
• Do not use to dye eyelashes or eyebrows.
• Rinse hair well after application.
• Keep out of reach of children.

3. Product Components

The Clairol Professional Permanent Liquicolor product typically includes:

• Clairol Professional Permanent Liquicolor (59 mL / 2 FL OZ LIQ)
• Instructions for use

Note: Developer is sold separately and is required for use with this product.

Image 1: Clairol Professional Permanent Liquicolor 6GN Dark Gold Neutral Blonde bottle and box. The box displays 'SOY4PLEX liquicolor permanente' and '6GN Dark Gold Neutral Blonde', along with 'Deep Conditioning Gray Coverage'. The bottle shows similar branding and color information.

4. Preparation Before Application

1. Skin Allergy Test: Conduct a skin allergy test 48 hours prior to each application. Apply a small amount of the mixed color to a clean area of skin behind the ear or on the inner elbow. Leave undisturbed for 48 hours. If any reaction occurs, do not use the product.
2. Strand Test: For best results and to determine processing time, perform a strand test. Mix a small amount of color and developer, apply to a small section of hair, and check every few minutes until desired color is achieved.
3. Gather Supplies: Ensure you have non-metallic mixing bowl, applicator brush, protective gloves, a timer, and a towel.
4. Protect Clothing: Drape a towel over your shoulders to protect clothing.

5. Mixing Instructions

Mix 2 oz. of Clairol Professional Liquicolor Permanente with 2 oz. of Clairol Professional Developer. The recommended ratio is 1:1 (one part color to one part developer).

• Use a non-metallic bowl for mixing.
• Stir thoroughly until a smooth, consistent mixture is achieved.

6. Application Instructions

Follow these general steps for applying Clairol Professional Permanent Liquicolor. For specific techniques like root melt, refer to the video demonstration below.

General Application:

1. Section Hair: Divide dry, unwashed hair into four equal sections using non-metallic clips.
2. Apply to Roots: Starting at the roots, apply the color mixture evenly to small subsections of hair. Ensure complete saturation.
3. Extend to Ends: If coloring all hair, extend the color through the mid-lengths and ends. For root touch-ups, apply only to the regrowth area.
4. Even Distribution: Use an applicator brush to ensure even distribution.

Video Demonstration: Root Melt Technique

7. Processing and Rinsing

1. Processing Time: Allow the color to process for 30 minutes. For resistant gray hair, an additional 5-10 minutes may be necessary. Do not exceed 45 minutes.
2. Rinsing: Once processing is complete, thoroughly rinse hair with lukewarm water until the water runs clear.
3. Shampoo and Condition: Shampoo and condition hair using a color-safe product.

8. Aftercare

To maintain your hair color and condition:

• Use color-safe shampoos and conditioners.
• Limit washing frequency to preserve color vibrancy.
• Protect hair from excessive sun exposure and chlorine.

9. Specifications

10. Troubleshooting

Common Issues:

• Color not taking: Ensure hair was clean and dry. Verify correct mixing ratio and processing time. Hair porosity can affect results; a strand test is recommended.
• Uneven color: Ensure thorough and even application, saturating all hair strands. Sectioning hair properly helps.
• Allergic reaction: Discontinue use immediately. Consult a medical professional. Always perform a skin allergy test 48 hours prior to use.

11. Warranty and Support

For specific warranty information or product support, please contact Clairol Professional directly through their official website or customer service channels. Details regarding product guarantees and support services are typically provided by the manufacturer.

Manufacturer: Clairol Professional