1. Introduction
This manual provides essential instructions for the installation, operation, and maintenance of your Marantec 104586 Battery Back Up system. This unit is designed to provide emergency power to Marantec Synergy 360, 370, and 380 garage door openers during power outages, ensuring continued access to your garage.
Please read this manual thoroughly before installation and use to ensure safe and efficient operation.
Figure 1: Marantec 104586 Battery Back Up Unit. This image displays the compact, rectangular black battery unit with a blue connector visible on one side, designed for integration with compatible Marantec garage door openers.
2. Setup and Installation
The Marantec 104586 Battery Back Up system is designed for easy integration with compatible Marantec Synergy garage door openers (models 360, 370, 380). It features a fully integrated 24-volt system, eliminating the need for external power cables.
2.1 Safety Precautions
- Ensure the garage door opener is unplugged from the main power supply before beginning installation.
- Refer to your garage door opener's main instruction manual for specific details regarding battery backup port location.
- Do not attempt to open or modify the battery backup unit.
2.2 Installation Steps
- Locate the Battery Port: Identify the dedicated battery backup port on your Marantec Synergy 360, 370, or 380 garage door opener. This port is typically clearly marked.
- Align and Insert: Carefully align the Marantec 104586 battery backup unit with the designated port. The unit is designed to slide into place securely.
- Secure Connection: Ensure the unit is fully seated and the connector (often blue, as seen in Figure 1) is firmly engaged.
- Restore Power: Plug your garage door opener back into the main power supply. The battery backup unit will begin charging automatically.
- Initial Charge: Allow several hours for the battery to fully charge after initial installation.
Once installed, the battery backup system operates automatically, providing power when the main electricity supply is interrupted.
3. Operation
The Marantec 104586 Battery Back Up system is designed for automatic operation during power outages.
3.1 Automatic Activation
- When main power to the garage door opener is interrupted, the battery backup unit will automatically engage, supplying power to the opener.
- The garage door opener will function normally using the battery power.
3.2 Battery Capacity
A fully charged battery backup unit allows for approximately 10 to 12 door operations (open and close cycles) over a 24-hour period during a power outage. Actual performance may vary based on door size, weight, and ambient temperature.
3.3 Power Restoration
Once main power is restored, the garage door opener will automatically switch back to AC power, and the battery backup unit will begin recharging.
4. Maintenance
Regular maintenance ensures the longevity and reliability of your Marantec 104586 Battery Back Up system.
4.1 Battery Testing
- It is recommended to test the battery backup system every 3-6 months.
- To test: Unplug the garage door opener from the main power supply. Operate the garage door using your remote control. If the door operates, the battery backup is functioning.
- Plug the opener back in after testing.
4.2 Battery Replacement
The lifespan of a battery can vary. If the battery backup unit fails to provide power during a test or a power outage, it may need replacement. Contact Marantec customer support or an authorized dealer for replacement options.
4.3 Cleaning
Keep the battery backup unit and its connection points clean and free from dust and debris. Use a dry, soft cloth for cleaning.
5. Troubleshooting
This section addresses common issues you might encounter with your Marantec 104586 Battery Back Up system.
| Problem | Possible Cause | Solution |
|---|---|---|
| Garage door opener does not work during a power outage. | Battery is not charged or is depleted. | Ensure the garage door opener is plugged into main power to allow the battery to charge. If the problem persists, the battery may need replacement. |
| Battery backup unit does not seem to be charging. | Loose connection or faulty unit. | Check that the battery backup unit is securely connected to the garage door opener. Verify the garage door opener is receiving main power. If issues continue, contact support. |
| Fewer than 10-12 operations during a power outage. | Battery is aging or not fully charged. | Ensure the battery has ample time to charge. Consider replacing the battery if it consistently provides significantly fewer cycles. |
For further assistance, please contact Marantec customer support.
6. Specifications
| Feature | Detail |
|---|---|
| Model Number | 104586 |
| Compatibility | Marantec Synergy 360, 370, 380 Garage Door Openers |
| Battery Voltage | 24 Volt (Integrated System) |
| Operations per Charge | Approx. 10-12 cycles over 24 hours (during power outage) |
| External Power Cables | Not required |
| ASIN | B07S9D21ND |
| Date First Available | November 24, 2022 |
7. Warranty and Support
For warranty information or technical support, please refer to the documentation provided with your original Marantec garage door opener or visit the official Marantec website. You may also contact Marantec customer service directly for assistance with your 104586 Battery Back Up unit.
