Godox X2T-N Wireless Flash Trigger Instruction Manual

1. Introduction

The Godox X2T-N is a versatile wireless flash trigger designed for Nikon cameras, offering advanced control over Godox flashes and speedlites. It integrates a 2.4G wireless X system, Bluetooth connectivity for smartphone app control, and supports various flash modes including TTL autoflash and 1/8000s High-Speed Sync (HSS). This manual provides detailed instructions for setup, operation, and maintenance to ensure optimal performance of your X2T-N trigger.

2. Safety Information

• Always read this instruction manual thoroughly before using the product.
• Do not expose this product to rain or moisture to avoid fire or electric shock.
• Do not disassemble. Should repairs be necessary, this product must be sent to an authorized maintenance center.
• Keep out of reach of children.
• Use only specified batteries (2x AA alkaline batteries). Incorrect battery types may cause damage.
• Avoid strong impacts or vibrations.

3. Package Contents

• 1x Godox X2T-N Wireless Flash Trigger
• 1x Instruction Manual (this document)
• 1x USB Type-C Cable (for firmware updates)

4. Parts Identification

Familiarize yourself with the components of your Godox X2T-N trigger:

• LCD Display: Shows current settings, groups, channels, and modes.
• Mode Button: Cycles through flash modes (TTL, M, Multi).
• Menu Button: Accesses additional settings.
• Set Button: Confirms selections.
• Group Buttons (A-E): Selects individual flash groups for control.
• Control Dial: Adjusts values and navigates menus.
• Hot Shoe: Mounts the trigger to your camera.
• Quick Lock Hot-Shoe: Secures the trigger to the camera.
• Type-C USB Port: For firmware updates.
• 3.5mm Sync Cord Jack: For wired triggering of flashes or cameras.
• Battery Compartment: Holds two AA batteries.

Image: Side view of Godox X2T-N, highlighting the Type-C USB port, 3.5mm sync cord jack, and the AA battery slot.

Image: A person holding the Godox X2T-N, illustrating its ergonomic design and button placement for easy operation.

5. Setup

5.1 Battery Installation

The X2T-N requires two AA batteries for operation. Locate the battery compartment on the side of the trigger. Slide the cover open, insert two AA batteries according to the polarity markings (+/-), and then close the cover securely.

5.2 Mounting to Camera

Slide the X2T-N onto your Nikon camera's hot shoe. Push it forward until it clicks into place. Rotate the quick-lock hot-shoe mechanism to secure the trigger firmly to the camera.

5.3 Power On/Off

To power on the X2T-N, press and hold the power button located on the side until the LCD screen illuminates. To power off, press and hold the power button again until the screen turns off.

5.4 Bluetooth Pairing (APP Control)

The Godox X2T-N supports control via the 'GodoxPhoto' smartphone application. Follow these steps to pair your device:

1. Download the 'GodoxPhoto' APP from your smartphone's app store.
2. Ensure Bluetooth is enabled on your smartphone.
3. On the X2T-N, press and hold the Bluetooth button (usually indicated by a Bluetooth icon) to activate pairing mode.
4. Open the 'GodoxPhoto' app on your phone and follow the on-screen instructions to connect to your X2T-N trigger.
5. Once connected, you can control flash settings directly from your smartphone.

Image: The Godox X2T-N trigger connected to a smartphone via Bluetooth, demonstrating app control capabilities with various Godox flashes.

6. Operating Instructions

6.1 Basic Operation

The X2T-N provides intuitive controls for managing your flash setup.

• Channel Setting: Press the 'CH' button, then rotate the control dial to select a channel from 1 to 32. Ensure your flashes are set to the same channel as the trigger to establish communication.
• Group Setting: Press one of the Group buttons (A, B, C, D, E) to select a specific flash group. Once a group is selected, use the control dial to adjust its power output or mode.
• Mode Selection: Press the 'MODE' button to cycle through available flash modes: TTL (Through-The-Lens Autoflash), M (Manual), and Multi (Stroboscopic Flash).
• Wireless ID Setting: To prevent interference from other wireless systems, press the 'ID' button and use the control dial to select a unique wireless ID from 01 to 99. Both the trigger and the flash units must have the same ID.

Image: Godox X2T-N LCD screen displaying settings for channel, ID, and PC sync, along with other operational parameters.

Image: Close-up of the Godox X2T-N mounted on a camera, showing the backlit LCD screen with flash group settings visible in a low-light setting.

6.2 Advanced Functions

• High-Speed Sync (HSS): The X2T-N supports shutter speeds up to 1/8000s for HSS. Ensure your camera and compatible flash units are also set to HSS mode.
• Flash Exposure Compensation (FEC): In TTL mode, use the control dial to adjust the flash exposure compensation to fine-tune the flash output.
• Flash Exposure Lock (FEL): This function allows you to lock the flash exposure value for consistent lighting across multiple shots. Refer to your camera's manual for FEL activation.
• Zoom Setting: Remotely adjust the zoom position of compatible flash heads directly from the X2T-N.

6.3 Firmware Update

To ensure your X2T-N has the latest features and bug fixes, regularly check for firmware updates. Connect the trigger to your computer using the provided Type-C USB cable. Visit the official Godox website to download the latest firmware and follow the provided update instructions.

Image: Diagrams illustrating the versatile applications of the Godox X2T-N, including triggering Godox flashes, speedlites, camera shutters, and flashes via sync cord.

7. Maintenance

• Cleaning: Use a soft, dry cloth to clean the exterior of the trigger. Do not use abrasive cleaners or solvents.
• Storage: When not in use for extended periods, remove the batteries to prevent leakage. Store the trigger in a cool, dry place, away from direct sunlight and extreme temperatures.
• Handling: Handle the trigger with care. Avoid dropping or subjecting it to strong impacts.

8. Troubleshooting

9. Specifications

10. Warranty and Support

For detailed warranty information, technical support, and service inquiries, please visit the official GODOX website or contact your authorized GODOX dealer. Keep your purchase receipt as proof of purchase for warranty claims.