1. Introduction
This manual provides comprehensive instructions for the assembly, operation, and maintenance of your Aosom PawHut 3PC Dog Agility Equipment Set. This set is designed to provide engaging physical and mental exercise for your dog, fostering a stronger bond between pet and owner. The equipment includes an adjustable hurdle, a jumping hoop, and six weave poles.
Regular exercise and training with this equipment can contribute to your dog's overall health and well-being.
2. Safety Information
- Always supervise your dog during training sessions.
- Ensure all components are securely assembled before use.
- Start training slowly and gradually increase difficulty to prevent injury.
- Do not force your dog to perform any exercise they are uncomfortable with.
- Inspect the equipment regularly for any damage or wear. Discontinue use if any part is broken or compromised.
- Ensure the training area is clear of hazards and provides adequate space for your dog to move safely.
- This equipment is intended for dogs. Keep out of reach of small children when not in use.
3. Package Contents
Before assembly, verify that all parts are present. The set includes:
- Adjustable Hurdle (components for one unit)
- Jumping Hoop (components for one unit)
- Weave Poles (components for six poles)
- Connecting Pipes and Joints
- Carry Bag

Figure 3.1: All components included in the package.
4. Setup Instructions
The agility equipment is designed for quick assembly and disassembly. Follow these steps for each obstacle:
4.1 General Assembly Tips
- Connect pipes firmly into the joints until they are snug.
- The base sections provide stability. Ensure they are flat on the ground.
4.2 Assembling the Hurdle
- Assemble the base frame using the appropriate pipes and corner joints.
- Insert the vertical support poles into the base.
- Attach the horizontal jump bar using the adjustable clips. These clips allow you to set the jump height according to your dog's size and training level.

Figure 4.1: Adjustable Hurdle.

Figure 4.2: Detail of adjustable clip for hurdle height.
4.3 Assembling the Jumping Hoop
- Assemble the base frame similar to the hurdle.
- Insert the vertical support poles.
- Attach the orange hoop to the vertical poles using the provided straps or clips. The hoop's height can be adjusted.

Figure 4.3: Detail of hoop attachment.
4.4 Assembling the Weave Poles
- Connect the base sections for the weave poles.
- Insert the six individual poles into the designated slots on the base. Ensure they are upright and stable.

Figure 4.4: Overview of the three obstacles: Hurdle, Jumping Hoop, and Weave Poles.

Figure 4.5: Product dimensions for each obstacle.
5. Operating Instructions (Training Guide)
This agility set is designed to help your dog get daily exercise and improve their agility skills. Remember to keep training sessions positive and rewarding.
5.1 General Training Principles
- Positive Reinforcement: Use treats, praise, and toys to reward your dog for successful attempts.
- Short Sessions: Keep training sessions brief (5-15 minutes) to maintain your dog's interest and prevent fatigue.
- Consistency: Practice regularly to reinforce learned behaviors.
- Start Simple: Begin with low heights and wide spacing, gradually increasing difficulty as your dog gains confidence.
5.2 Hurdle Training
- Set the hurdle to its lowest height.
- Lure your dog over the bar with a treat or toy, walking alongside them.
- Once your dog consistently jumps over, introduce a verbal command like "Jump!" or "Over!".
- Gradually increase the height of the bar as your dog becomes proficient.
5.3 Jumping Hoop Training
- Position the hoop at a low, easily accessible height.
- Guide your dog through the hoop with a treat, initially holding the treat on the other side.
- Introduce a command like "Through!" or "Hoop!" as they pass through.
- Increase the hoop's height as your dog masters the exercise.
5.4 Weave Pole Training
- Start with the poles spaced wider apart if your dog is new to weaving.
- Guide your dog through the poles in an S-pattern using a treat or your hand.
- Use a command like "Weave!" as they navigate the poles.
- As your dog improves, gradually decrease the spacing between the poles.

Figure 5.1: Dog demonstrating use of the agility course.
6. Maintenance
Proper maintenance ensures the longevity and safe use of your agility equipment.
- Cleaning: The equipment is hand washable. Use mild soap and water to clean any dirt or debris. Rinse thoroughly and allow to air dry completely before storage.
- Storage: After use, especially outdoors, disassemble the equipment and store it in the provided carry bag. Store in a dry, protected area to prevent damage from weather elements.
- Inspection: Periodically check all pipes, joints, and straps for cracks, breaks, or loose connections. Replace any damaged parts immediately.
7. Troubleshooting
This section addresses common issues you might encounter with the agility set.
- Equipment is unstable or falls over easily: The equipment is lightweight for portability and safety. For increased stability, especially on uneven ground or with larger, more energetic dogs, you may consider filling the hollow pipes with play sand. Ensure caps are securely in place after filling.
- Weave poles come apart easily: Ensure all pipe connections are pushed firmly into the joints during assembly. If moving the assembled weave poles, handle them carefully to prevent separation.
- Dog is not engaging with the equipment: Ensure training sessions are short, positive, and use high-value rewards. Re-evaluate the difficulty level; it might be too challenging. Consult a professional dog trainer if difficulties persist.
8. Specifications
| Model Number | D07-023 |
| Item Weight | 10.34 pounds |
| Overall Dimensions (LxWxH) | 127.25 x 26.5 x 37.25 inches |
| Material | PE (Polyethylene) |
| Number of Items | 3 (Hurdle, Hoop, Weave Poles) |
| Breed Recommendation | Medium Size |
| Care Instructions | Hand Washable |
9. Warranty and Support
This Aosom PawHut Dog Agility Equipment Set comes with a 1-Year Manufacturer's Warranty.
For warranty claims, technical support, or inquiries regarding replacement parts, please contact Aosom customer service directly. Refer to your purchase documentation or the Aosom website for current contact information.
When contacting support, please have your model number (D07-023) and proof of purchase readily available.