BWT D300

BWT D300 Pool Robot User Manual

Model: D300 | Brand: BWT

Introduction

This manual provides essential information for the safe and efficient operation, maintenance, and troubleshooting of your BWT D300 Pool Robot. Please read this manual thoroughly before using the device and keep it for future reference.

Safety Instructions

  • Always disconnect the power supply before performing any maintenance or cleaning.
  • Do not operate the robot if the power cable is damaged. Contact qualified service personnel for repair.
  • Ensure the robot is fully submerged before starting operation.
  • Keep children and pets away from the pool area during robot operation.
  • Use only original BWT replacement parts and accessories.
  • Store the robot in a cool, dry place when not in use.

Setup

Follow these steps for initial setup:

  1. Unpacking: Carefully remove the pool robot from its packaging.
  2. Filter Preparation: Clean the filter before the first use to ensure optimal performance.
  3. Placement in Pool: Gently place the pool robot into the pool. Ensure it sinks to the bottom.
  4. Power Connection: Connect the robot's power supply to a suitable electrical outlet.
BWT D300 Pool Robot with app control

Figure 1: The BWT D300 Pool Robot, designed to clean the floor, walls, and waterline of pools up to 12 meters in length. It features convenient app control for easy operation.

Operation

The BWT D300 Pool Robot offers intelligent navigation and can be controlled via a dedicated app.

  1. Starting the Robot: You can start the pool robot either via the dedicated mobile application or by pressing the button on the control unit.
  2. App Control: Download the BWT app from your device's app store. Connect to the robot via Bluetooth for remote control and setting cleaning cycles.
  3. Cleaning Cycle: The robot will automatically clean the pool floor, walls, and waterline using its smart navigation system and gyroscopic sensors.
Hand holding smartphone with BWT app

Figure 2: A hand holding a smartphone displaying the BWT app interface, which allows for convenient control of the pool robot via Bluetooth.

BWT D300 Pool Robot cleaning pool floor

Figure 3: The BWT D300 Pool Robot submerged and actively cleaning the pool floor, demonstrating its innovative control system and smart navigation capabilities.

Maintenance

Regular maintenance ensures the longevity and optimal performance of your BWT D300 Pool Robot.

  1. Filter Cleaning: After each cleaning cycle, remove the robot from the pool and clean its filter. The 4D filtration technology captures even the smallest impurities.
  2. Hose Cleaning: Rinse the robot and its cable with fresh water after use to remove chlorine and debris.
  3. Storage: Store the robot and its power supply in a dry, shaded area when not in use. The included caddy facilitates easy transport and storage.
Man cleaning the 4D filter of the BWT D300 Pool Robot

Figure 4: A person cleaning the easily accessible 4D filter of the BWT D300 Pool Robot with a hose, highlighting its design for capturing even the finest particles.

BWT D300 Pool Robot with transport caddy

Figure 5: The BWT D300 Pool Robot positioned on its transport caddy, demonstrating its very simple handling, anti-tangle device, and compact power supply.

Troubleshooting

This section addresses common issues you might encounter with your BWT D300 Pool Robot.

ProblemPossible CauseSolution
Robot does not start.No power supply; cable damaged; control unit error.Check power connection. Inspect cable for damage. Restart control unit.
Poor cleaning performance.Clogged filter; worn brushes; insufficient submersion.Clean filter thoroughly. Check brushes for wear and replace if necessary. Ensure robot is fully submerged.
Robot does not move or gets stuck.Obstruction; tangled cable; motor issue.Remove any obstructions. Untangle the cable. If problem persists, contact support.
App connection issues.Bluetooth not enabled; robot out of range; app error.Ensure Bluetooth is on. Move closer to the robot. Restart the app or your phone.

If you encounter issues not listed here or if the suggested solutions do not resolve the problem, please contact BWT customer support.

Specifications

  • Brand: BWT
  • Model Name: BWT Pool-Roboter D300 APP
  • Model Number: 125305504
  • Special Feature: Easy to clean, excellent suction power, intelligent navigation, 4D filtration technology, easy app operation.
  • Control Method: App
  • Installation Type: Robotic
  • Material: Stainless Steel
  • Power Source: Corded Electric
  • Item Weight: 11 Kilograms
  • Suitable for Pools: Up to 12 meters in length, up to 100 m² surface area.
  • Cleaning Coverage: Floor, Walls, Waterline.

Warranty and Support

The BWT D300 Pool Robot comes with a limited warranty. For detailed warranty information, please refer to the warranty card included with your product or visit the official BWT website.

For technical support, spare parts, or service inquiries, please contact BWT customer service. Contact details can typically be found on the BWT website or on your purchase documentation.

No official seller videos were found for this product in the provided data.

© 2024 BWT. All rights reserved.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.