Introduction
This manual provides essential information and instructions for the proper installation and maintenance of your Lxiyu MAF2 Humidifier Filter Replacements. These filters are designed to ensure optimal performance of your compatible humidifier, contributing to a healthier and more comfortable indoor environment.
Product Overview
The Lxiyu MAF2 Humidifier Filter is a wicking filter designed to absorb water and allow it to evaporate into the air, increasing humidity levels. It helps to filter out minerals and pollutants from the water, preventing white dust and ensuring cleaner moisture output.

Figure 1: Lxiyu MAF2 Humidifier Filter Replacements (4-pack)
Compatibility
These Lxiyu MAF2 humidifier filter replacements are compatible with a wide range of humidifier models, including:
- Emerson MoistAir Models: MA0600, MA0601, MA0800, MA08000
- Kenmore Models: 15408, 154080, 17006, 29706, 29880C, 29988, 299880C, 758.15408, 758.17006, 758.29706, 758.29880C, 758.29988
- Noma Models: CT0800, CT0800-0, CT08000
- Also compatible with Emerson Part # MAF2, Kenmore Part # 15508, and Noma Part # EF2.
Features
- High Density Multi-layer Mesh: Constructed from natural fabric with a dense network structure for enhanced water absorption and maximum moisture output.
- Efficient Water Evaporation: Designed to maintain optimal humidity levels for long-lasting humidifier performance.
- Mineral Filtration: Helps to filter out hardness minerals and other pollutants from the water, preventing white dust and improving air quality.
- Durable Construction: Features a tight connection and reinforced design for extended filter life.

Figure 2: Detailed view of the filter's multi-layer mesh and construction.
Setup and Installation
Follow these steps to properly install your new humidifier filter:
- Power Off: Ensure your humidifier is turned off and unplugged from the power outlet before beginning installation.
- Remove Humidifier Cover: Carefully remove the top cover or housing of your humidifier to access the filter compartment.
- Remove Old Filter: Lift out the old, used humidifier filter. Dispose of it according to local regulations.
- Clean Humidifier Base: It is recommended to clean the humidifier's water reservoir and base thoroughly to remove any mineral buildup or residue before installing the new filter.
- Install New Filter: Place the new Lxiyu MAF2 filter into the designated filter compartment. Ensure it is seated correctly and securely. The filter is designed to fit snugly.
- Replace Cover: Reattach the humidifier cover or housing, ensuring it is properly closed and secured.
- Refill Water Tank: Fill the humidifier's water tank with clean, fresh water.
- Power On: Plug the humidifier back into the power outlet and turn it on.
Video 1: Demonstration of MAF2 Humidifier Filter Replacement for MA0800 and Kenmore 15408 models. This video illustrates the process of removing an old filter and installing a new one.
Video 2: MAF2 Humidifier Filter Replacement. This video provides a general guide on replacing the humidifier filter.
Operating
Once the new filter is installed and the humidifier is powered on, it will begin to humidify the air. Allow some time for the new filter to fully absorb water and reach its optimal wicking capacity. The humidifier should operate as per its original manufacturer's instructions.
Maintenance
Regular maintenance of your humidifier and filter is crucial for optimal performance and longevity.
- Filter Replacement Frequency: For best results and to maintain healthy air quality, replace your humidifier filter every 1 to 3 months, or more frequently if you notice reduced moisture output, mineral buildup, or discoloration. The lifespan of the filter can vary depending on water hardness and usage.
- Regular Cleaning: Clean your humidifier's water tank and base regularly (e.g., weekly) to prevent the growth of mold, mildew, and bacteria. Follow your humidifier's manufacturer guidelines for cleaning.
- Water Quality: Using distilled or demineralized water can extend the life of your filter and reduce mineral buildup.
Video 3: MAF2 Wick Humidifier Filters. This video highlights the features and benefits of the filters, emphasizing their role in humidifier maintenance.
Troubleshooting
- Reduced Moisture Output: If you notice a decrease in humidification, check if the filter is heavily caked with mineral deposits. Replace the filter if necessary. Ensure the water tank is full.
- White Dust: White dust indicates mineral buildup being released into the air. This is a sign that your filter is saturated and needs replacement. Using distilled water can help prevent this.
- Unpleasant Odor: An odor may indicate bacterial growth in the water tank or on the filter. Clean the humidifier thoroughly and replace the filter.
- Filter Not Wicking Water: Ensure the filter is fully submerged in water and properly seated. If the filter is old or heavily mineralized, it may lose its wicking ability and require replacement.
Specifications
| Attribute | Detail |
|---|---|
| Model Number | MAF2 |
| Brand | Lxiyu |
| Compatible Devices | Humidifiers (specific models listed in Compatibility section) |
| Material | High-quality filter paper with multi-layer mesh |
| Color | White |
| Item Weight | Approximately 1.39 pounds (for 4-pack) |
| Package Dimensions | Approximately 12 x 10 x 8 inches |
| UPC | 634715767677 |

Figure 3: Lxiyu MAF2 filters emphasizing key benefits.
Warranty and Support
For specific warranty information or customer support regarding your Lxiyu MAF2 Humidifier Filters, please refer to the product packaging or contact the manufacturer directly. Keep your purchase receipt for warranty claims.





