1. Introduction
This manual provides comprehensive instructions for the safe and efficient installation, operation, and maintenance of your Aurlane CAB172 Shower Cabin. Please read this manual thoroughly before beginning installation or use to ensure proper function and longevity of the product. Keep this manual for future reference.
2. Safety Information
Always observe the following safety precautions:
- Ensure all electrical connections are made by a qualified electrician, if applicable.
- Verify that the installation surface is level and capable of supporting the weight of the shower cabin and its contents.
- Use appropriate personal protective equipment (PPE) during installation, such as gloves and safety glasses.
- Handle glass components with extreme care to prevent breakage and injury.
- Do not use abrasive cleaners or tools that could damage the surfaces of the shower cabin.
- Ensure adequate ventilation in the bathroom during and after use.
3. Package Contents
Verify that all components are present and undamaged before beginning installation. The Aurlane CAB172 Shower Cabin package typically includes:
- Painted aluminum frame (metallic grey)
- Sliding doors (5 mm tempered glass)
- Shower tray/base (5 mm tempered glass, grey)
- Roof (white tempered glass)
- Shower head and associated fittings
- Assembly hardware and seals
Figure 3.1: Exterior view of the Aurlane CAB172 Shower Cabin, showing the overall structure and sliding doors.
4. Setup and Installation
Professional installation is recommended for optimal results. Ensure the installation area meets the following requirements:
- Required Height: A minimum height of 230 cm is needed for installation.
- Level Surface: The floor must be perfectly level to ensure proper drainage and stability.
- Water Connections: Hot and cold water supply lines must be readily accessible.
- Drainage: A floor drain must be available and correctly positioned.
4.1 Assembly Steps
- Prepare the Base: Position the 5 mm grey tempered glass shower tray on the prepared, level surface. Ensure it is stable and correctly aligned with the drainage.
- Install the Frame: Assemble the metallic grey painted aluminum frame according to the diagrams provided in the separate assembly guide (not included in this manual). Secure all frame components firmly.
- Mount the Glass Panels: Carefully insert the fixed tempered glass panels into the frame. Use appropriate seals to ensure a watertight fit.
- Attach Sliding Doors: Install the 5 mm tempered glass sliding doors onto the frame's runners. Test their smooth operation.
- Install Roof: Place the white tempered glass roof panel onto the top of the frame, ensuring it is securely seated and sealed.
- Connect Plumbing: Connect the shower head and associated fittings to the water supply lines. Ensure all connections are watertight.
- Final Checks: After assembly, perform a leak test by running water through the shower system. Check all seals and connections for any signs of leakage.
Figure 4.1: Close-up view of the shower cabin base, showing the drainage point and tempered glass construction.
5. Operating Instructions
The Aurlane CAB172 Shower Cabin is designed for straightforward operation.
- Door Operation: The shower cabin features sliding doors. Gently slide the doors open or closed using the bar-type handles. Avoid forcing the doors.
- Water Flow: Use the integrated mixer tap to control water temperature and flow to the shower head.
Figure 5.1: Interior view of the Aurlane CAB172 Shower Cabin, showing the shower head, controls, and internal structure.
6. Maintenance
Regular cleaning and maintenance will ensure the longevity and appearance of your shower cabin.
- Daily Cleaning: After each use, rinse the glass panels and interior surfaces with clean water to remove soap residue.
- Weekly Cleaning: Use a soft cloth and a mild, non-abrasive bathroom cleaner to clean all surfaces. Avoid cleaners containing harsh chemicals, ammonia, or abrasive particles, as these can damage the glass and frame finish.
- Glass Care: To prevent water spots and limescale buildup, wipe glass surfaces dry with a squeegee or microfiber cloth after each use.
- Drain Maintenance: Periodically clean the shower drain to prevent blockages.
- Seal Inspection: Regularly inspect seals for wear and tear. Replace damaged seals to maintain watertight integrity.
7. Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Water Leakage | Loose connections, damaged seals, improper installation. | Check all plumbing connections and tighten if necessary. Inspect seals and replace if damaged. Ensure the shower cabin is level. |
| Sliding Doors Stick | Dirt or debris in runners, misaligned rollers. | Clean the door runners thoroughly. Check and adjust door rollers for proper alignment. |
| Slow Drainage | Blocked drain. | Remove and clean the drain trap. Use a drain cleaner if necessary, ensuring it is safe for your plumbing system. |
If you encounter issues not listed here or if troubleshooting steps do not resolve the problem, contact customer support.
8. Specifications
| Feature | Detail |
|---|---|
| Brand | AURLANE |
| Model Number | CAB172 |
| Material | Acrylic, Tempered Glass |
| Door Style | Sliding Doors |
| Glass Thickness | 5 mm (Doors, Base) |
| Frame Material | Painted Aluminum (Metallic Grey) |
| Roof Material | White Tempered Glass |
| Installation Type | Freestanding |
| Shape | Rectangular |
| Required Installation Height | 230 cm |
9. Warranty and Support
For warranty information, technical support, or to order replacement parts, please contact Aurlane customer service. Refer to your purchase documentation for specific warranty terms and contact details.
Manufacturer: Aurlane
ASIN: B07S76JKJN