Coaster Fine Furniture 3-Piece Occasional Set User Manual

Introduction

This manual provides instructions for the assembly, use, and maintenance of your Coaster Fine Furniture 3-Piece Occasional Set. This set includes one coffee table and two end tables, designed with a white faux marble surface and dark gunmetal legs. Please read these instructions carefully before assembly and use to ensure proper setup and longevity of your furniture.

The complete 3-piece occasional set, including one coffee table and two end tables, arranged in a modern living room environment.

Safety Information

• Ensure all parts are securely fastened before using the furniture. Periodically check and re-tighten all connections.
• Do not stand or sit on the tables. They are designed for decorative items and light use.
• Keep small parts and packaging materials away from children to prevent choking hazards.
• Place tables on a level surface to prevent tipping.
• Do not exceed the recommended weight capacity for each table. While specific limits are not provided, exercise caution with heavy items.

Package Contents

Before beginning assembly, verify that all components are present and undamaged. If any parts are missing or damaged, contact customer support.

• 1 x Coffee Table Top (White Faux Marble)
• 2 x End Table Tops (White Faux Marble)
• 1 x Coffee Table Frame (Dark Gunmetal Metal)
• 2 x End Table Frames (Dark Gunmetal Metal)
• Hardware Pack (Screws, washers, Allen wrench, etc.)

Setup and Assembly

Assembly is required for this occasional set. It is recommended to assemble the furniture on a soft, clean surface to prevent scratching. Two people may be required for easier assembly.

Tools Required (Not Included):

• Phillips Head Screwdriver (optional, for some screws)

Assembly Steps:

1. Unpack Components: Carefully remove all parts from the packaging and lay them out on a protected surface. Identify each component against the package contents list.
2. Assemble Table Frames: For each table (one coffee table, two end tables), attach the horizontal support bars to the vertical leg sections using the provided hardware (screws, washers) and Allen wrench. Do not fully tighten screws at this stage.
3. Attach Table Tops: Carefully place the faux marble table top onto the assembled frame. Align the pre-drilled holes in the table top with the holes in the frame. Secure the top to the frame using the appropriate screws.
4. Final Tightening: Once all parts are aligned and loosely assembled, gradually tighten all screws until secure. Avoid over-tightening to prevent damage.
5. Placement: Carefully move the assembled tables to their desired location.

A diagram illustrating the height, width, and depth measurements for the coffee table and end tables.

A straight-on view of the coffee table, highlighting its rectangular white faux marble top and dark gunmetal base.

A side view of one of the end tables, showcasing its square white faux marble top and dark gunmetal frame.

Operating and Usage

The 3-Piece Occasional Set is designed for use in living areas as functional and decorative surfaces. The coffee table serves as a central piece, while the end tables can be placed beside sofas or chairs.

• Use coasters under beverages to protect the faux marble surface from moisture rings.
• Avoid placing hot items directly on the surface; use protective pads.
• Distribute weight evenly across the table surface.
• Do not drag items across the faux marble top to prevent scratches.

Care and Maintenance

Proper care will help maintain the appearance and extend the life of your occasional set.

Faux Marble Tops:

• Wipe spills immediately with a soft, damp cloth.
• For general cleaning, use a mild, non-abrasive cleaner specifically designed for faux marble or laminate surfaces. Avoid harsh chemicals, abrasive cleaners, or polishes containing silicone.
• Do not use wax or furniture polish on the faux marble surface.
• Protect from direct sunlight and extreme temperature changes.

Metal Frames:

• Clean the dark gunmetal frames with a soft, damp cloth.
• Avoid using abrasive cleaners or solvents that could damage the finish.
• Periodically check and tighten all hardware connections to ensure stability.

Detailed view of the white faux marble tabletop, showing its realistic veining pattern.

A close-up image of the dark gunmetal finish on the metal frame, illustrating its texture and color.

Troubleshooting

Wobbly Table:

• Ensure all assembly screws are fully tightened.
• Check if the table is placed on an uneven surface. Adjust with furniture glides if necessary.

Surface Scratches or Stains:

• Refer to the "Care and Maintenance" section for cleaning instructions.
• Use coasters and protective pads to prevent future damage.

Specifications

Warranty Information

This Coaster Fine Furniture product is covered by a 1-year limited warranty from the date of purchase. This warranty covers manufacturing defects in materials and workmanship under normal household use. It does not cover damage resulting from improper assembly, misuse, abuse, accidents, or normal wear and tear. For warranty claims, please retain your proof of purchase and contact customer support.

Customer Support

If you have any questions regarding the assembly, parts, or operation of your Coaster Fine Furniture 3-Piece Occasional Set, please contact the retailer where you purchased the product or visit the official Coaster Fine Furniture website for support resources.

Online Resources: www.coasterfurniture.com