1. Introduction
This user manual provides comprehensive instructions for the setup, operation, and maintenance of your XTUGA ES602 Professional Audio Mixer. Please read this manual thoroughly before operating the device to ensure proper use and to maximize its performance and longevity. Keep this manual for future reference.
The XTUGA ES602 is an ultra-thin, 6-channel audio mixer designed for professional stage and studio applications. It features mono and stereo inputs, 3-band equalization per channel, built-in digital effects, Bluetooth connectivity, USB/MP3 playback and recording, and +48V phantom power.
2. Key Features
- Ultra-thin Design: Fashionable all-metal chassis, high dynamic range, and low noise design.
- Multi-format Play Support: Integrated Bluetooth for wireless connection to mobile devices and tablets. Features a digital display MP3 player with U-DISK input and recording capabilities.
- Mono Channels EQ: Each mono channel includes a 3-band EQ for precise tone shaping.
- Input Flexibility: 6 channels with XLR and Line inputs, gain trim, switchable high-pass filters, and +48V phantom power for condenser microphones.
- Comprehensive Monitoring & Control: Headset monitoring, recording outputs, stereo equipment output jacks. Each channel is equipped with Aux, Effect, Gain, Channel fader knobs, and a Peak indicator.
- Built-in Digital Effects: Enhance your sound with integrated digital sound effects.
- Total Output EQ: 5-band EQ on the total output for master sound adjustment.
3. Setup Guide
3.1 Unpacking and Inspection
Carefully remove the mixer from its packaging. Inspect the unit for any signs of damage that may have occurred during transit. Retain the original packaging for future transport or storage.
3.2 Power Connection
Connect the provided power adapter to the mixer's power input jack. Plug the adapter into a suitable AC power outlet. Ensure the mixer's power switch is in the "OFF" position before connecting to power.
3.3 Initial Connections
Before powering on the mixer, connect all necessary input and output devices. This includes microphones, instruments, playback devices, amplifiers, and monitoring speakers.
Figure 1: Rear panel of the XTUGA ES602 mixer, illustrating the power input, main outputs, and auxiliary connections. Ensure all cables are securely connected before powering on the unit.
- Microphones: Connect XLR cables from your microphones to the XLR inputs on channels 1-6.
- Instruments/Line Devices: Connect 1/4" TS/TRS cables from instruments or line-level devices to the Line inputs on the respective channels.
- Main Output: Connect the main outputs (e.g., XLR or 1/4" TRS) to your amplifier or powered speakers.
- Monitor Output: Connect your monitor speakers or headphones to the dedicated monitor outputs.
4. Operating Instructions
4.1 Channel Controls Overview
Figure 2: Front panel layout of the XTUGA ES602, highlighting the individual channel controls and the master section. Familiarize yourself with the layout for efficient operation.
- GAIN Knob: Adjusts the input sensitivity for each channel. Set this to achieve a strong signal without clipping (indicated by the PEAK LED).
- EQ (HIGH, MID, LOW): Three-band equalizer for shaping the tone of each channel.
- HIGH: Adjusts treble frequencies (12KHz).
- MID: Adjusts mid-range frequencies (150Hz-3.5KHz for mono, 720Hz for stereo).
- LOW: Adjusts bass frequencies (80Hz).
- AUX Knob: Controls the level of the channel signal sent to the auxiliary output (e.g., for monitor mixes).
- EFFECT Knob: Controls the level of the channel signal sent to the built-in digital effects processor.
- PAN/BALANCE Knob: Positions the channel signal in the stereo field (left to right).
- CHANNEL FADER: Adjusts the overall volume level of the individual channel sent to the main mix.
- PEAK LED: Illuminates when the input signal is too high, indicating potential clipping. Reduce the GAIN if this LED lights up frequently.
- +48V PHANTOM POWER: Button to activate +48V phantom power for condenser microphones. Ensure microphones are connected before activating.
4.2 Master Section Controls
- MAIN MIX FADER: Controls the overall output volume of the main stereo mix.
- EFFECTS SECTION: Controls for selecting and adjusting the built-in digital effects. Refer to the display for effect parameters.
- MP3/USB/BLUETOOTH SECTION:
- MODE Button: Switches between USB, Bluetooth, and MP3 playback modes.
- PLAY/PAUSE Button: Starts or pauses playback.
- PREV/NEXT Buttons: Navigates through tracks.
- REC Button: Initiates recording to a connected USB drive.
- USB Port: For connecting USB flash drives for MP3 playback and recording.
- HEADPHONE LEVEL: Adjusts the volume for the headphone output.
- GRAPHIC EQ: 5-band graphic equalizer for fine-tuning the overall main mix sound.
4.3 Bluetooth Operation
- Press the MODE button in the MP3/USB/Bluetooth section until "Bluetooth" or "BT" is displayed.
- On your mobile device or tablet, enable Bluetooth and search for available devices.
- Select "XTUGA ES602" (or similar name) from the list to pair.
- Once paired, you can play audio from your device through the mixer. Adjust the MP3/USB/Bluetooth channel fader to control its volume in the mix.
4.4 USB/MP3 Playback and Recording
- Insert a USB flash drive into the USB port.
- Press the MODE button until "USB" or "MP3" is displayed. The mixer will automatically scan for compatible audio files.
- Use the PLAY/PAUSE, PREV, and NEXT buttons to control playback.
- To record the main mix to the USB drive, press the REC button. Press it again to stop recording. The recorded file will be saved on the USB drive.
5. Maintenance
5.1 Cleaning
To clean the mixer, use a soft, dry cloth. For stubborn dirt, a slightly damp cloth can be used, followed by a dry cloth. Do not use abrasive cleaners, solvents, or waxes, as these can damage the finish and internal components. Ensure the mixer is powered off and unplugged before cleaning.
5.2 Storage
When not in use for extended periods, store the mixer in a cool, dry place, away from direct sunlight, extreme temperatures, and excessive dust. It is recommended to use the original packaging for storage to protect against physical damage.
6. Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| No sound output. |
|
|
| Distorted sound. |
|
|
| Microphone not working (condenser mic). |
|
|
| Bluetooth not connecting. |
|
|
7. Technical Specifications
| Parameter | Value |
|---|---|
| Frequency Response (Mic Line Input to Any Output) | ±1.5dB, 20Hz ~ 20KHz |
| Total Harmonic Distortion + Noise (Sensitivity -30dB, Mixing Output +14dBu) | <0.02% @ 1KHz |
| Channel Mute Crosstalk (1KHz) | >90dB |
| Fader Off Crosstalk (Reference Mark +10) | >90dB |
| AUX Send Port Closed Crosstalk | >83dB |
| Mono Input EQ - LOW (Low Frequency) | 80Hz ± 15dB |
| Mono Input EQ - MID (Sweep) | 150Hz-3.5KHz ± 15dB (Q: 1.5) |
| Mono Input EQ - HIGH (High Frequency) | 12KHz ± 15dB |
| Stereo Input EQ - LOW (Low Frequency) | 80Hz ± 15dB |
| Stereo Input EQ - MID (Intermediate Frequency) | 720Hz ± 15dB (Q: 0.8) |
| Stereo Input EQ - HIGH (High Frequency) | 12KHz ± 15dB |
| Power Consumption | Less than 35W (AC power) |
| Working Conditions Temperature | 5°C to +40°C |
| Product Dimensions | 55 x 45 x 10 cm |
| Item Weight | 5 kg |
| Model Number | ES602 |
8. Warranty and Support
For information regarding warranty coverage, technical support, or service, please contact XTUGA customer service through their official website or the retailer from whom you purchased the product. Please have your product model number (ES602) and purchase details ready when contacting support.
For the most up-to-date support information, visit the official XTUGA website: www.xtuga.com (Note: This is a placeholder URL, please refer to actual product documentation for official support links).
