Introduction
This manual provides detailed instructions for the safe and effective use of your Oral-B AquaCare 6 Pro-Expert Oral Irrigator. This wireless oral irrigator utilizes Oxyjet technology, enriching water with micro-air bubbles for intensive cleaning between teeth and promoting healthier gums. It features 6 cleaning modes, allowing for adjustable water intensity and jet types to suit individual dental care needs.
Safety Information
- Always read the instructions before use.
- Keep out of reach of children.
- Do not use if you have certain medical conditions. Consult a dental professional if unsure.
- Do not immerse the device in water.
- Allow the device to cool before storing.
- Do not use damaged or worn nozzles. Replace nozzles every 3 months or sooner if worn.
- Always unplug the device from the power source before cleaning.
Package Contents
Your Oral-B AquaCare 6 Pro-Expert Oral Irrigator package includes:
- 1 Oral-B AquaCare Pro-Expert Oral Irrigator unit
- 1 Charging station
- 2 Oxyjet nozzles
- 2 AA batteries (included)
Image: The Oral-B AquaCare 6 Pro-Expert Oral Irrigator unit, its charging station, and two Oxyjet nozzles, displayed alongside its product packaging.
Setup
1. Charging the Device
Before first use, fully charge the oral irrigator. Place the device on the charging station. The charging indicator will illuminate to confirm charging is in progress. A full charge typically takes approximately 1 hour.
2. Attaching a Nozzle
Select one of the provided Oxyjet nozzles. Align the nozzle with the opening at the top of the irrigator unit and push it firmly until it clicks into place.
Image: The Oral-B AquaCare 6 Pro-Expert Oral Irrigator standing upright with a nozzle attached, and a spare nozzle lying next to it, illustrating the interchangeable design.
3. Filling the Water Container
The water container is easily removable for filling. To remove, first pull back the blue lock hook located on the bottom of the device. Fill the container with lukewarm water. For enhanced cleaning, you may add mouthwash as recommended by your dental professional. Reattach the container by aligning it and pushing it back until the lock hook secures it.
Image: A person holding the Oral-B AquaCare 6 Pro-Expert Oral Irrigator under a faucet, demonstrating the process of filling its water tank.
Operating Instructions
1. Power On and Mode Selection
Press the power button to turn on the device. The AquaCare 6 Pro-Expert offers 6 cleaning levels, including 3 adjustable water intensities (normal, medium, sensitive) and options for targeted or rotating water jets. Use the mode selection button to cycle through the available settings and choose your preferred intensity and jet type.
Image: A close-up view of the control panel on the Oral-B AquaCare 6 Pro-Expert Oral Irrigator, highlighting the power button and the intensity selection options (intense, medium, sensitive).
2. Activating the Water Jet
The water jet can be activated on demand. Position the nozzle at a 90-degree angle to your gumline. Direct the water jet at the teeth and along the gumline, focusing on interdental spaces. The device is suitable for use with tooth braces.
Image: A visual representation of the Oral-B AquaCare 6 Pro-Expert's water jet effectively cleaning between teeth, dislodging food particles and plaque.
Image: An illustration showcasing the Oxyjet technology, where water is enriched with micro-air bubbles for a gentle yet thorough cleaning experience.
3. Using Targeted or Rotating Jet
For precise cleaning, select the targeted jet. For a gentle massage of the gums, choose the rotating jet. Adjust the intensity as needed for comfort and effectiveness.
Image: A visual demonstrating the on-demand water jet feature, allowing users to activate the stream only when required for controlled cleaning.
Maintenance
1. Cleaning the Device
After each use, empty any remaining water from the reservoir. Rinse the water container thoroughly with clean water. Wipe the exterior of the irrigator unit with a soft, damp cloth. Ensure the charging port cover is securely closed to maintain water resistance.
2. Nozzle Care and Replacement
Rinse the nozzle under running water after each use. For optimal hygiene and performance, replace the Oxyjet nozzles every three months or sooner if they show signs of wear.
Troubleshooting
If the device does not turn on or operate as expected, ensure it is fully charged. Check that the water reservoir is correctly attached and filled. If the water jet is weak, ensure the nozzle is not clogged and the intensity setting is appropriate. For persistent issues, refer to the full product manual or contact Oral-B customer support.
Specifications
- Model Number: 80322277
- Product Dimensions: 6.34 x 2.68 x 9.96 inches
- Weight: 1.17 Pounds
- Power Source: Battery Powered (2 AA batteries included)
- Special Features: Adjustable water intensity, Targeted jet, Interdental cleaner, Oxyjet technology
- Product Benefits: Provides gentle and effective cleaning for sensitive teeth and gums
- Manufacturer: Procter & Gamble
Warranty and Support
For warranty information and customer support, please refer to the documentation provided with your product at the time of purchase or visit the official Oral-B website. Keep your proof of purchase for warranty claims.
