Trulrox Bark Collar Model COLLAR User Manual

1. Introduction

Thank you for choosing the Trulrox Bark Collar. This device is designed to assist in training your dog to reduce excessive barking through a combination of beep, vibration, and optional static correction. Please read this manual thoroughly before use to ensure proper operation and the safety of your pet.

Package Contents:

• 1 x Receiver
• 1 x Adjustable Nylon Collar
• 1 x USB Charging Cable
• 1 x Test Light
• 1 x User Manual (this document)
• 4 x Contact Points (two short, two long)
• 4 x Conductive Silicone Covers

Image 1: Contents of the Trulrox Bark Collar package, including the receiver, collar, charging cable, test light, contact points, and silicone covers.

2. Safety Information

• This device is intended for dog training purposes only.
• Do not use on aggressive dogs or dogs with health issues. Consult a veterinarian if unsure.
• The collar should not be worn for more than 12 hours per day to prevent skin irritation.
• Regularly check your dog's neck for signs of irritation or sores. If irritation occurs, discontinue use until the skin heals.
• Ensure the collar is properly fitted, not too tight or too loose.
• The static correction feature should be used responsibly and only after other training methods have been attempted.
• Keep out of reach of children.

3. Product Components and Display

Image 2: Diagram illustrating the various components of the Trulrox Bark Collar receiver, including the charging jack, contact points, sensor microphone, mode button, power/set button, sensitivity level display, battery status, and mode indicators.

Key Components:

• Sensor Mic: Detects dog's barking.
• Contact Points: Deliver static correction (if enabled).
• Conductive Silicone: Covers contact points for comfort and protection.
• Charging Jack: For connecting the USB charging cable.
• Mode Button (M): Cycles through training modes.
• Power/Set Button (Power icon): Turns the device on/off and adjusts sensitivity.
• Display: Shows battery status, sensitivity level, and active mode.

4. Setup and Fitting

4.1 Charging the Device

Before first use, fully charge the bark collar receiver. Connect the USB charging cable to the charging jack on the receiver and a compatible 5V USB power adapter (not included). The battery status indicator on the display will show charging progress. A full charge typically takes 2 hours and provides up to 10 days of use.

Image 3: The bark collar receiver connected to a USB charging cable, illustrating the charging process. Note the warning about using a 5V adapter.

4.2 Attaching Contact Points and Silicone Covers

1. Select the appropriate length of contact points (short for short-haired dogs, long for long-haired dogs) to ensure good skin contact.
2. Screw the chosen contact points onto the receiver.
3. Place the conductive silicone covers over the contact points for enhanced comfort and to prevent direct metal-to-skin contact.

4.3 Fitting the Collar

1. Thread the adjustable nylon collar through the receiver.
2. Place the collar around your dog's neck, ensuring the receiver is positioned centrally under the chin.
3. Adjust the strap so that it is snug but not too tight. You should be able to fit one finger comfortably between the collar and your dog's neck.
4. Ensure the contact points make proper contact with your dog's skin.

Image 4: The Trulrox Bark Collar properly fitted around a dog's neck, showing the receiver positioned for optimal function.

5. Operating Instructions

5.1 Powering On/Off

• To Power On: Press and hold the Power/Set button for 2 seconds. The display will light up.
• To Power Off: Press and hold the Power/Set button for 2 seconds. The display will turn off.

5.2 Adjusting Sensitivity

The collar has adjustable sensitivity levels to detect barking. Higher sensitivity means it will detect softer barks. Adjust based on your dog's barking volume and environment.

1. With the device powered on, press the Power/Set button briefly to cycle through sensitivity levels (1-7).
2. Level 1 is the lowest sensitivity, Level 7 is the highest.
3. The current sensitivity level will be displayed.

5.3 Selecting Training Mode

The collar offers two main training modes: No Shock Mode and Shock Mode.

1. With the device powered on, press the Mode button (M) briefly to cycle between modes.
2. The display will indicate the active mode (Beep+Vibrate or Beep+Vibrate+Shock).

6. Training Modes and Protection

Image 5: Flowchart detailing the two main training modes (No Shock and Shock) and the progressive correction levels for each bark detected within the protection mode cycle.

6.1 No Shock Mode (Beep + Vibration)

In this mode, the collar will only use audible beeps and vibrations to deter barking. This is recommended for initial training or for sensitive dogs.

• Bark 01: 3 seconds Beep, 5 seconds Vibration.
• Bark 02: 3 seconds Beep, 5 seconds Vibration.
• ... (Progressive intensity for subsequent barks)

6.2 Shock Mode (Beep + Vibration + Static Correction)

This mode includes static correction in addition to beeps and vibrations. The static correction is intermittent and increases in intensity with persistent barking. This is the default setting.

• Bark 01: 3 seconds Beep, 5 seconds Vibration.
• Bark 02: 3 seconds Beep, 5 seconds Vibration, 1.5 seconds (normal) Static Correction.
• Bark 03: 3 seconds Beep, 5 seconds Vibration, 1.5 seconds (increased) Static Correction.
• Bark 04: 3 seconds Beep, 5 seconds Vibration, 1.5 seconds (strong) Static Correction.
• Bark 05: 3 seconds Beep, 5 seconds Vibration, 1.5 seconds (strong) Static Correction.
• Bark 06: 3 seconds Beep, 5 seconds Vibration, 1.5 seconds (strong) Static Correction.

6.3 Protection Mode

For your pet's safety, the collar features a built-in protection mode. If the collar is triggered 7 times within a 1-minute period, it will automatically stop functioning for 2 minutes. After this 2-minute safety period, the collar will resume normal operation.

The collar is designed to activate only when your dog barks. Other nearby dog barks or sounds should not trigger the collar.

7. Maintenance

7.1 Cleaning

• Regularly clean the receiver and contact points with a damp cloth.
• Ensure the contact points are free of dirt or debris to maintain effective contact with your dog's skin.
• The collar is IP67 waterproof, meaning it can withstand splashes, rain, and brief immersion. However, it is not recommended for prolonged swimming.

Image 6: A dog playing in water with the Trulrox Bark Collar, demonstrating its IP67 waterproof rating against splashes and rain.

7.2 Battery Care

• Charge the collar when the battery indicator shows low power.
• Avoid overcharging or completely draining the battery for optimal lifespan.
• Store the collar in a cool, dry place when not in use.

8. Troubleshooting

9. Specifications

• Material: ABS PC (Receiver), Nylon, Polycarbonate (Collar)
• Waterproof Level: IP67
• Battery Capacity: 480mAh Lithium Ion
• Output: 5.0V 1.0A
• Charge Time: Approximately 2 Hours
• Battery Life: Up to 10 Days per Charge
• Adjustable Collar Range: 3.7 - 21.5 inches
• Suitable for Dogs: 6 to 150 lbs
• Item Model Number: COLLAR
• Collar Dimensions (L x W): 21.5 x 3.7 inches
• Weight: 6 ounces (total product)

10. Warranty and Support

For warranty information or technical support, please refer to the contact details provided with your purchase or visit the official Trulrox website. Keep your purchase receipt as proof of purchase.