1. Introduction
This manual provides essential instructions for setting up, operating, and maintaining your JBL Cinema SB110 Soundbar. Please read this manual thoroughly before using the product to ensure proper functionality and safety.
Image: The JBL Cinema SB110 Soundbar shown with its remote control, illustrating the sleek design of the soundbar.
2. Safety Information
Always follow basic safety precautions when using this product to reduce the risk of fire, electric shock, and personal injury:
- Do not expose this appliance to dripping or splashing.
- Do not place objects filled with liquids, such as vases, on the apparatus.
- Ensure proper ventilation; do not block any ventilation openings.
- Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat.
- Protect the power cord from being walked on or pinched, particularly at plugs, convenience receptacles, and the point where they exit from the apparatus.
- Only use attachments/accessories specified by the manufacturer.
- Unplug this apparatus during lightning storms or when unused for long periods of time.
3. What's in the Box
Carefully unpack your soundbar and verify that all components are present:
- 1 x JBL Cinema SB110 Soundbar
- 1 x Remote control with batteries
- Power cables (up to 4pcs depending on region SKUs)
- 1 x HDMI cable
- Wall-mount bracket kit with screws
- 1 x Quick start guide
- 1 x Warranty card
- 1 x Safety sheet
4. Product Overview
4.1. Top Panel Controls
Image: A close-up view of the soundbar's top panel, showing the power button, source selection, volume down, and volume up buttons.
- Power Button: Turns the soundbar on or off.
- Source Button: Selects the audio input source (HDMI, Optical, Bluetooth).
- Volume Down (-): Decreases the volume level.
- Volume Up (+): Increases the volume level.
4.2. Remote Control
Image: The remote control for the JBL Cinema SB110, displaying buttons for power, mute, volume, playback controls, and dedicated source/sound mode buttons (BT, Movie, Optical, Music, HDMI, News).
The remote control provides convenient access to all soundbar functions, including power, volume, source selection, and sound modes.
4.3. Internal Speaker Configuration
Image: An internal diagram of the JBL Cinema SB110 soundbar, highlighting the placement of its speakers and built-in subwoofer for deep bass.
The JBL Cinema SB110 features a built-in subwoofer and multiple speakers designed to deliver a comprehensive audio experience with deep bass without the need for an external subwoofer unit.
5. Setup
5.1. Placement
Place the soundbar on a flat, stable surface directly in front of your television. Ensure there are no obstructions blocking the soundbar's speakers.
Image: The JBL Cinema SB110 soundbar positioned below a television, illustrating its physical dimensions (37.4 inches wide) in relation to a typical 32-inch TV (29.2 inches wide).
5.2. Wall Mounting
The soundbar can be wall-mounted using the included bracket kit. Refer to the quick start guide for detailed wall-mounting instructions. Ensure the wall can support the weight of the soundbar and use appropriate fasteners for your wall type.
5.3. Connections
Image: A diagram illustrating two primary connection methods for the JBL Cinema SB110: Option 1 shows connection via HDMI ARC to a TV, and Option 2 shows connection via an Optical cable to a TV.
5.3.1. HDMI ARC Connection (Recommended)
- Connect one end of the HDMI cable (included) to the HDMI OUT (ARC) port on your soundbar.
- Connect the other end of the HDMI cable to the HDMI ARC port on your television. This port is usually labeled 'HDMI ARC' or 'HDMI (eARC)'.
- Ensure HDMI-CEC is enabled in your TV's settings. This allows your TV remote to control the soundbar's volume and power. Refer to your TV's user manual for specific instructions on enabling HDMI-CEC.
Note: Only HDMI 1.4 cables or higher support the ARC function.
5.3.2. Optical Connection
- Remove the protective cap from the OPTICAL socket on the soundbar.
- Connect an optical cable (not included) from the OPTICAL OUT port on your television or other audio source to the OPTICAL input on the soundbar.
Note: In Optical/HDMI ARC mode, if there is no sound output from the unit and the status indicator flashes, you may need to activate PCM or Dolby Digital Signal output on your source device (e.g., TV, DVD or Blu-ray player).
5.3.3. Bluetooth Connection
To connect a Bluetooth device:
- Press the Bluetooth (BT) button on the remote control or the source button on the soundbar until the Bluetooth indicator lights up.
- On your device, enable Bluetooth and search for 'JBL Cinema SB110'.
- Select the soundbar from the list to pair. Once connected, the Bluetooth indicator will glow solid.
6. Operating Instructions
6.1. Power On/Off
Press the Power button on the soundbar's top panel or the remote control to turn the unit on or off.
6.2. Source Selection
Press the Source button on the soundbar or the dedicated source buttons (HDMI, Optical, BT) on the remote control to switch between input sources.
6.3. Volume Control
Use the Volume Up (+) or Volume Down (-) buttons on the soundbar or remote control to adjust the volume. Press the Mute button on the remote to temporarily silence the audio.
6.4. Sound Modes
The remote control features dedicated buttons for optimizing audio for different content types:
- MOVIE: Enhances dialogue and sound effects for films.
- MUSIC: Provides a balanced sound profile for music playback.
- NEWS: Optimizes voice clarity for news broadcasts and spoken content.
7. Maintenance
To maintain the performance and appearance of your soundbar:
- Clean the soundbar with a soft, dry cloth. Do not use liquid cleaners or aerosols.
- Avoid placing the soundbar in direct sunlight or near heat sources.
- Do not expose the soundbar to excessive moisture.
8. Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| No power | Power cord not connected or outlet not active. | Ensure the power cord is securely plugged into the soundbar and a working power outlet. |
| No sound | Incorrect input source selected, volume too low, or cables not connected properly. | Select the correct input source. Increase volume. Check HDMI or Optical cable connections. Ensure TV audio output is set to external speakers (PCM or Dolby Digital). |
| Bluetooth pairing fails | Soundbar not in pairing mode, or device too far. | Ensure the soundbar is in Bluetooth pairing mode. Move your device closer to the soundbar. Disconnect other Bluetooth devices from the soundbar. |
| Remote control not working | Batteries depleted or obstructed signal. | Replace remote control batteries. Ensure there are no obstructions between the remote and the soundbar. |
9. Specifications
- Model Name: Cinema SB110
- Speaker Type: Soundbar
- Total Speaker Maximum Output Power: 110 Watts
- Frequency Response: 40Hz - 20kHz
- Max SPL: 82dB
- Surround Sound Channel Configuration: 2.1
- Connectivity Technology: Bluetooth, HDMI, Wireless
- Bluetooth Version: 4.2
- Audio Input Compatible with Item: HDMI, Optical
- Product Dimensions (LxWxH): 43.3 x 4.9 x 3.7 cm
- Item Weight: 2.6 kg
- Mounting Type: Wall Mount
- Included Components: Soundbar, Remote control, Power cables, HDMI cable, Wall-mount bracket kit, Quick start guide, Warranty card, Safety sheet
10. Warranty and Support
The JBL Cinema SB110 Soundbar comes with a 1-year manufacturer's warranty from the date of purchase. Please retain your proof of purchase for warranty claims.
For technical support, service, or warranty inquiries, please contact JBL customer service through their official website or the contact information provided in your warranty card.
