1. Product Overview
The Jada Toys Fast & Furious Brian & Toyota Supra 1:24 Scale Die-Cast Model Kit allows for the assembly of a detailed replica of the iconic Toyota Supra from the Fast & Furious film series. This kit includes a 2.75-inch die-cast figure of Brian O'Conner. The model features authentic exterior styling, a detailed interior, and real rubber tires, constructed from quality die-cast metal components.
Image 1.1: Packaged Jada Toys Fast & Furious Brian & Toyota Supra 1:24 Scale Die-Cast Model Kit.
2. Safety Information
- Recommended Age: This product is recommended for ages 8 years and up. Adult supervision is advised for younger users.
- Small Parts: The kit contains small parts which may pose a choking hazard for children under 3 years of age. Keep all components out of reach of infants and toddlers.
- Heavy Die-Cast Components: The model contains heavy die-cast metal parts. Handle with care to avoid injury. Do not throw or misuse the product.
- Sharp Edges: Some components may have sharp edges. Exercise caution during assembly.
3. What's in the Box
Your Jada Toys Fast & Furious Brian & Toyota Supra 1:24 Scale Die-Cast Model Kit includes the following components:
- Die-cast vehicle body (Toyota Supra)
- Die-cast Brian O'Conner figure (2.75 inches)
- Various assembly parts (e.g., wheels, interior components, chassis, spoiler)
- Assembly screwdriver
Image 3.1: Contents of the model kit, including the vehicle body, figure, and various parts.
4. Setup and Assembly
This model kit is designed for straightforward assembly. Follow these general steps to construct your die-cast vehicle:
- Unpack Components: Carefully remove all parts from the packaging. Verify that all listed components are present.
- Review Instructions: Refer to any included diagrams or specific instructions provided within the kit packaging for detailed assembly steps.
- Assemble Chassis and Interior: Attach interior components to the chassis as indicated.
- Attach Wheels: Secure the wheels to the axles. Ensure they rotate freely.
- Mount Body: Carefully place the die-cast vehicle body onto the assembled chassis.
- Add Exterior Details: Attach the spoiler and any other exterior accessories.
- Secure Parts: Use the provided screwdriver to tighten any screws, ensuring all parts are firmly connected.
- Position Figure: Place the Brian O'Conner figure alongside or within the completed vehicle for display.
Image 4.1: The assembled model, demonstrating features like the removable roof panel.
5. Operating and Display
Once assembled, the Jada Toys Fast & Furious Brian & Toyota Supra model is primarily intended for display and light interaction.
- Display: Place the model on a stable, flat surface away from direct sunlight, extreme temperatures, and high humidity to preserve its finish and structural integrity.
- Interaction: The wheels are designed to roll, allowing for gentle movement. The included Brian O'Conner figure can be positioned as desired.
- Avoid Rough Handling: This is a collector's item and not designed for rough play. Excessive force or impact may cause damage to the die-cast components or paint finish.
Image 5.1: The assembled Toyota Supra model displayed with the Brian O'Conner figure.
6. Maintenance
- Cleaning: To clean the model, gently wipe it with a soft, dry, lint-free cloth. For stubborn dust, a slightly damp cloth can be used, followed immediately by a dry cloth. Avoid abrasive cleaners or solvents, as these can damage the paint and finish.
- Storage: When not on display, store the model in its original packaging or a protective display case to prevent dust accumulation and accidental damage.
- Inspection: Periodically inspect the model for any loose parts. Re-tighten screws with the provided screwdriver if necessary.
7. Troubleshooting
- Parts Not Fitting: If parts do not fit together easily, do not force them. Re-check the assembly instructions and diagrams to ensure correct orientation. Small burrs on plastic parts can sometimes be carefully trimmed with a hobby knife (adult supervision required).
- Missing Parts: If you discover any missing components upon opening the kit, please contact Jada Toys customer support with your product model number and purchase details.
- Loose Components: If any parts become loose after assembly, gently re-attach them. For screw-fastened parts, use the provided screwdriver to tighten them carefully, avoiding over-tightening.
8. Specifications
| Brand | Jada Toys |
| Model Number | JA30699 |
| Scale | 1:24 |
| Product Dimensions | 8.5 x 3.63 x 2.5 inches (L x W x H) |
| Item Weight | 1.54 pounds |
| Material | Die-cast metal |
| Recommended Age | 8 years and up |
Image 8.1: The model car shown with a ruler for scale reference.
9. Warranty and Support
For warranty information or product support, please refer to the contact details provided on the product packaging or visit the official Jada Toys website. Keep your proof of purchase for any warranty claims.
