Introduction
The DEWALT DXFRS220 is a pair of wearable walkie-talkies designed for heavy-duty use. These two-way radios offer ultra-clear, long-distance reception, covering up to 100,000 square feet depending on terrain and conditions. They provide easy access to all 22 FRS channels and are compatible with other FRS walkie-talkie two-way radios. This manual provides essential information for the proper setup, operation, and maintenance of your DXFRS220 walkie-talkies.
Figure 1: Front view of two DEWALT DXFRS220 Walkie Talkies.
What's in the Box
Verify that all items are present upon unpacking:
- Two (2) DEWALT DXFRS220 Walkie Talkies
- One (1) Micro-USB Charging Cable
Product Features
- Long Range Communication: 1 Watt of power provides up to 100,000 sq. ft. of signal range, varying with terrain and conditions.
- Roger Beep Tone: A confirmation tone signals the completion of your transmission, indicating to others that the channel is clear to talk.
- Extended Battery Life: Built-in rechargeable Li-polymer battery offers up to 10 hours of operation. Charges conveniently via Micro-USB.
- Water Resistant (IPX4 Standard): Provides protection against splashing water from any direction.
- 22 FRS Channels: Easy access to all available Family Radio Service channels.
Setup
1. Charging the Battery
Your DXFRS220 walkie-talkies come with a built-in rechargeable Lithium Polymer battery. Before first use, fully charge the devices.
- Connect the Micro-USB charging cable to the charging port on the side of the walkie-talkie.
- Plug the other end of the USB cable into a compatible USB power adapter (not included) or a computer USB port.
- The charging indicator light will illuminate, typically red, during charging and change color (e.g., green) when fully charged.
- Charging typically takes several hours. Do not overcharge the battery.
2. Powering On/Off
To power on or off the walkie-talkie:
- Power On: Press and hold the Power/Mode button (usually marked with a power symbol) located on the side of the device until you hear an audible tone.
- Power Off: Press and hold the Power/Mode button until the device powers down.
Figure 2: Side view showing control buttons and charging port.
Operating Instructions
1. Selecting a Channel
Your DXFRS220 walkie-talkies operate on 22 FRS channels. To communicate with another radio, both devices must be set to the same channel.
- With the radio powered on, press the Mode button (often the same as the Power button, or a dedicated 'M' button) to enter channel selection mode.
- Use the Up (+) or Down (-) buttons to cycle through the available channels (1-22).
- Once the desired channel is displayed, press the Mode button again or wait a few seconds for the selection to be confirmed.
2. Transmitting and Receiving
To communicate:
- To Transmit (Talk): Press and hold the Push-to-Talk (PTT) button (typically a large button on the side). Speak clearly into the microphone, holding the radio approximately 2-3 inches from your mouth. Release the PTT button when you finish speaking.
- To Receive (Listen): Ensure the PTT button is not pressed. The radio will automatically receive transmissions on the selected channel.
3. Roger Beep Tone
The Roger Beep tone is an audible signal transmitted when you release the PTT button. This tone confirms to other users that your transmission has ended and the channel is clear for them to speak.
4. Adjusting Volume
Use the Up (+) and Down (-) buttons to adjust the listening volume to a comfortable level.
Video 1: Official product video demonstrating the features and operation of the DEWALT DXFRS220 Walkie Talkies.
Maintenance
1. Cleaning
To maintain optimal performance and appearance:
- Wipe the radio with a soft, damp cloth.
- Do not use abrasive cleaners or solvents.
- Ensure the charging port cover is securely closed when not charging to maintain water resistance.
2. Battery Care
To prolong the life of your Li-polymer battery:
- Avoid fully discharging the battery frequently.
- Store the radios in a cool, dry place when not in use for extended periods.
- Recharge the battery at least once every three months if stored.
3. Water Resistance
The DXFRS220 is rated IPX4 water resistant, meaning it is protected against splashing water. It is not designed for submersion. Always ensure the charging port cover is sealed to maintain water resistance.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| No power | Battery is depleted. | Recharge the battery using the Micro-USB cable. |
| Cannot communicate with other radios | Radios are on different channels. | Ensure all radios are set to the same channel. |
| Poor range or static | Obstructions (buildings, hills) or interference. | Move to a more open area. Reduce distance between radios. Check for sources of electrical interference. |
| No sound from speaker | Volume is too low. | Increase the volume using the (+) button. |
| Roger Beep not heard | Feature may be disabled (if applicable) or not heard due to distance. | Ensure the feature is enabled (refer to advanced settings if available). Confirm reception at closer range. |
Specifications
| Feature | Detail |
|---|---|
| Model Number | DXFRS220 |
| Product Dimensions | 2.39 x 2.36 x 1.19 inches |
| Item Weight | 9.4 ounces |
| Batteries | 1 Lithium Polymer battery required (included) |
| Number of Channels | 22 FRS Channels |
| Frequency Range | 400-470 MHz |
| Talking Range Maximum | 100,000 Feet (approx. 19 miles, varies by terrain) |
| Voltage | 3.7 Volts |
| Water Resistance Level | IPX4 Water Resistant |
| Included Components | Walkie Talkie (2), charging cable |
| Color | Clear (referring to the product's primary color scheme, typically black and yellow) |
Figure 3: Rear view showing model number and belt clip.
Warranty Information
DEWALT products are manufactured to high-quality standards. For specific warranty details, including coverage period and terms, please refer to the warranty card included with your product or visit the official DEWALT website. Keep your proof of purchase for warranty claims.
Support
For further assistance, technical support, or to view additional product information, please visit the official DEWALT website or contact their customer service department. Contact information can typically be found on the DEWALT website or in the product packaging.
