Professional Glass Washer with Drain Pump

1. Introduction and Overview

This manual provides essential information for the safe and efficient operation, installation, and maintenance of your STALGAST Professional Glass Washer, Model 801401. Designed for commercial use, this appliance features a built-in drain pump, a rinse aid dispenser, and low water consumption, making it ideal for washing glassware and bar crockery.

Please read this manual thoroughly before operating the appliance and keep it for future reference.

Figure 1: Stalgast Professional Glass Washer, Model 801401.

2. Safety Information

Always adhere to the following safety precautions to prevent injury or damage to the appliance:

• Ensure the appliance is connected to a properly grounded electrical outlet (230 Volts).
• Do not operate the machine if the power cord or plug is damaged.
• Keep hands and foreign objects clear of moving parts, especially during operation.
• Use only detergents and rinse aids specifically designed for commercial glass washers.
• Never attempt to repair the appliance yourself. Contact qualified service personnel for all repairs.
• Always disconnect the power supply before cleaning or performing maintenance.

3. Setup

3.1 Unpacking

Carefully remove the glass washer from its packaging. Inspect for any shipping damage. Retain packaging materials for future transport if needed. The box includes the glass washer unit, a cutlery basket, and a drain hose.

3.2 Placement

Place the appliance on a stable, level surface capable of supporting its weight when full. Ensure adequate ventilation around the unit. Avoid placing it near heat sources or in direct sunlight.

3.3 Connections

• Water Supply: Connect the appliance to a cold water supply using appropriate hoses. Ensure water pressure is within the recommended range.
• Drain Connection: Connect the provided drain hose to a suitable drain point. The integrated drain pump will automatically discharge wastewater.
• Electrical Connection: Plug the appliance into a dedicated 230 Volt, grounded electrical outlet.

3.4 Initial Rinse

Before first use, perform an empty wash cycle to flush out any manufacturing residues. Add a small amount of commercial dishwasher detergent to the dispenser for this initial cycle.

4. Operating Instructions

4.1 Loading the Glass Washer

Arrange glassware and bar crockery in the provided basket, ensuring items are not nested and water can reach all surfaces. Do not overload the basket. The unit is designed for efficient washing of glassware and bar crockery.

Figure 2: Properly loaded glass washer basket.

4.2 Adding Detergent and Rinse Aid

Fill the designated detergent dispenser with commercial liquid detergent. The appliance features an automatic rinse aid dispenser; ensure it is filled with appropriate commercial rinse aid for optimal drying results and to prevent spotting.

4.3 Selecting a Wash Cycle

The glass washer offers 6 parameters for its single wash cycle option. Use the push-button controls on the front panel to select and initiate the desired cycle. Refer to the control panel for specific cycle indicators.

Figure 3: Operating the control panel and door handle.

4.4 Starting and Stopping

Close the door securely. Press the start button to begin the wash cycle. The machine will automatically proceed through the wash, rinse, and drain phases. To stop the cycle prematurely, press the stop button or open the door (caution: hot water may be present).

4.5 Unloading

Once the cycle is complete, carefully open the door and allow steam to escape. Remove the basket with clean, dry glassware. Exercise caution as items may still be hot.

5. Maintenance

Regular maintenance ensures optimal performance and longevity of your glass washer.

5.1 Daily Cleaning

• Interior: Wipe down the interior surfaces with a damp cloth after each use.
• Filters: Remove and clean the coarse and fine filters daily to prevent blockages and ensure proper drainage.
• Spray Arms: Check the spray arms for clogged nozzles. Remove and clean them if necessary to ensure even water distribution.

Figure 4: Interior view showing spray arms and filter.

5.2 Drain Pump Maintenance

The integrated drain pump requires minimal maintenance. Periodically check the drain hose for kinks or blockages. If the pump appears to be struggling or not draining effectively, consult the troubleshooting section or contact service.

5.3 Descaling

Depending on water hardness, periodic descaling may be necessary. Use a commercial descaling agent suitable for dishwashers and follow the product instructions carefully. This helps maintain heating efficiency and prevents mineral buildup.

6. Troubleshooting

Before contacting service, review the following common issues and their potential solutions:

7. Specifications

8. Warranty and Support

For warranty information and technical support, please refer to the documentation provided at the time of purchase or contact STALGAST customer service directly. Ensure you have your model number (801401) and serial number ready when contacting support.