Soarking Charging Dock/Stand for Fossil and Michael Kors Smartwatches - Instruction Manual

1. Product Overview

The Soarking Charging Dock/Stand is designed to provide a convenient and efficient charging solution for a range of Fossil and Michael Kors smartwatches. It features a built-in 5-foot cable and a stand design for optimal viewing during charging.

Key Features:

• Fast Charging: Achieves a full charge for compatible smartwatches in approximately 1 hour.
• Integrated Protection: Features built-in overvoltage, overcurrent, overheat, and short-circuit protection for safe charging.
• Enhanced Magnetic Connection: Equipped with an updated magnetic design to ensure a secure connection between the watch and charger.
• Extended Cable Length: Includes a 5-foot cable for flexible placement.
• Portrait Orientation Charging: The stand design allows the smartwatch to be charged in a portrait orientation, providing an intuitive viewing angle.

2. Compatibility

Compatible Smartwatch Models:

This charging dock is specifically designed to work with the following smartwatch models:

• Fossil Gen 6
• Fossil Gen 5 / 5E (Carlyle men, Julianna women)
• Fossil Sport
• Fossil Gen 4 (Explorist HR, Venture HR)
• Emporio Armani
• Michael Kors MKGO Runway
• Michael Kors Sofie Heart Rate
• Michael Kors Access MKGO
• Diesel ON Fullguard 2.5 Smartwatch (Model: DZT9001)
• Diesel Axial (Models: DZT2014, DZT2016, DZT2015, DZT2017)
• Skagen Falster 2 (2018)
• Kate Spade Scallop 2
• Misfit Vapor 2

Incompatible Smartwatch Models:

This charging dock is NOT compatible with the following smartwatch models:

• Fossil Gen 3 Sport / Explorist / Venture
• Fossil Q Founder Gen 2 / Marshal Gen 2 / Q Wander Gen 2 / Q Founder Gen 1
• Michael Kors Access Bradshaw / MK Access Steel
• Emporio Armani Gen 1
• Diesel Gen 3, Gen 2, Gen 1
• Skagen Falster Gen 1
• Kate Spade Scallop 1

3. Setup

Connecting the Charging Dock:

1. Uncoil the integrated 5-foot USB charging cable from the Soarking Charging Dock/Stand.
2. Insert the USB-A end of the cable into a compatible USB power source (e.g., a computer USB port, a USB wall adapter, or a power bank). Ensure the power source provides 5 Volts and 1 Amp output for optimal performance.
3. Place the charging dock on a stable, flat surface.

Setup Video:

4. Operating Instructions

Charging Your Smartwatch:

1. Ensure the charging dock is properly connected to a power source as described in the Setup section.
2. Gently place your compatible smartwatch onto the magnetic charging puck located on the stand. The magnetic connection will help align the watch correctly.
3. Verify that the smartwatch screen indicates it is charging. If not, slightly adjust the watch's position on the puck until charging begins.
4. Allow approximately 1 hour for the smartwatch to achieve a full charge. Charging time may vary based on the watch model and its current battery level.

5. Safety Information

To ensure safe operation and prolong the life of your charging dock and smartwatch, please observe the following safety guidelines:

• Do not expose the charging dock to water or excessive moisture.
• Avoid dropping or subjecting the device to strong impacts.
• Use only with compatible smartwatches as listed in the Compatibility section.
• Do not attempt to disassemble or modify the charging dock.
• Keep out of reach of children and pets.
• Ensure proper ventilation around the charging dock during use to prevent overheating.
• The built-in protection circuits (overvoltage, overcurrent, overheat, short-circuit) are designed for safety; however, always monitor charging.

6. Maintenance

Proper care and maintenance will help ensure the longevity and optimal performance of your Soarking Charging Dock/Stand:

• Cleaning: Disconnect the charger from the power source before cleaning. Use a soft, dry, lint-free cloth to wipe the surface of the charging dock. Do not use harsh chemicals, cleaning solvents, or strong detergents.
• Storage: When not in use, store the charging dock in a cool, dry place away from direct sunlight and extreme temperatures.
• Cable Care: Avoid bending or crimping the charging cable excessively. Do not pull the cable to disconnect it from the power source; always grasp the USB plug.

7. Troubleshooting

If you encounter any issues with your Soarking Charging Dock/Stand, please refer to the following common troubleshooting steps:

• Smartwatch Not Charging:
  • Ensure the USB cable is securely plugged into both the power source and the charging dock.
  • Verify that the power source is active and functioning correctly. Try a different USB port or wall adapter.
  • Adjust the position of your smartwatch on the magnetic charging puck. A secure magnetic connection is crucial for charging.
  • Confirm that your smartwatch model is listed as compatible with this charging dock.
• Slow Charging:
  • Ensure your power source provides adequate output (5 Volts, 1 Amp). Lower power output may result in slower charging.
  • Avoid using the smartwatch extensively while it is charging.
• Weak Magnetic Connection:
  • Some lighter smartwatches may experience a less firm magnetic hold. Ensure the watch is stable on the stand and the charging indicator is active.
  • Clean the charging contacts on both the smartwatch and the charging puck to ensure optimal contact.
• Charger Stops Working:
  • Try connecting the charging dock to a different power source to rule out an issue with the original power source.
  • Inspect the cable for any visible damage or kinks.
  • If the issue persists, refer to the Warranty and Support section.

8. Specifications

9. Warranty and Support

The Soarking Charging Dock/Stand comes with a 1-Year Warranty from the date of purchase. For warranty claims or technical support, please contact Soarking customer service through your retailer or the official Soarking website.