KRAUS Kore Workstation 30-inch Undermount Kitchen Sink User Manual

Introduction

This manual provides essential information for the installation, operation, and maintenance of your KRAUS Kore Workstation 30-inch Undermount 16 Gauge Stainless Steel Kitchen Sink. The Kore Workstation sink is engineered with an integrated ledge to support custom sliding accessories, designed to streamline kitchen tasks from meal preparation to cleanup. Constructed from heavy-duty TRU16 gauge stainless steel, this sink offers exceptional durability and a modern aesthetic for any kitchen environment.

1. Important Safety Information

Please read all instructions carefully before installation and use. Failure to follow these instructions may result in property damage, injury, or voiding of the warranty.

• Always wear appropriate personal protective equipment (PPE), such as safety glasses and gloves, during installation.
• It is highly recommended that installation be performed by a qualified professional to ensure proper setup and adherence to local plumbing codes.
• Ensure all water supply lines are shut off before beginning any plumbing work.
• This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.

2. Package Contents

Verify that all components listed below are included in your package:

• KRAUS Kore Workstation 30-inch Undermount Kitchen Sink
• Heavy-duty Bamboo Cutting Board
• Roll-Up Dish Drying Rack
• Protective Bottom Grid
• Drain Assembly
• Decorative Drain Cover
• Installation Hardware and Cut-Out Template

Figure 2.1: KRAUS Kore Workstation Sink and its accompanying accessories.

3. Specifications

Detailed specifications for the KRAUS Kore Workstation 30-inch Sink:

Figure 3.1: Sink Dimensions and Minimum Cabinet Size.

Figure 3.2: TRU16 Gauge Stainless Steel Thickness.

4. Setup & Installation

For detailed installation instructions, please refer to the official Installation Manual (PDF) provided by Kraus. Key steps include:

1. Preparation: Ensure your countertop is properly prepared for an undermount sink. Use the provided cut-out template for accurate sizing.
2. Mounting: Securely mount the sink to the underside of the countertop using the supplied hardware. Ensure a watertight seal.
3. Plumbing Connections: Connect the drain assembly and P-trap to your household plumbing system. Verify all connections are tight and leak-free.
4. Faucet Installation: Install your chosen kitchen faucet according to its manufacturer's instructions.

It is highly recommended to consult with a professional plumber or installer to ensure correct and safe installation, especially for undermount sinks which require precise countertop cutting and sealing.

5. Operating Instructions

The KRAUS Kore Workstation Sink is designed for enhanced functionality with its integrated ledge system. This allows for seamless use of the included accessories directly over the sink, maximizing your counter space.

• Bamboo Cutting Board: Slide the cutting board along the integrated ledge to create a convenient food preparation area directly over the sink. This helps contain messes and simplifies cleanup.
• Roll-Up Dish Drying Rack: Position the drying rack over the sink for air-drying dishes, produce, or other items. Its roll-up design allows for easy storage when not in use.
• Protective Bottom Grid: Place the grid at the bottom of the sink to protect the sink's surface from scratches and dents, and to promote better drainage by keeping dishes elevated.
• Drain Assembly and Cover: The stainless steel drain assembly includes a removable strainer to catch food debris. The decorative drain cover can be used to conceal the drain opening for a clean look or to fill the sink bowl for soaking.

Figure 5.1: Workstation functionality with cutting board and drying rack.

Figure 5.2: Roll-up dish drying rack in use.

6. Maintenance & Care

Proper care will ensure the longevity and appearance of your KRAUS Kore Workstation Sink.

Stainless Steel Sink Care:

• Daily Cleaning: Wipe the sink with a soft cloth and warm, soapy water after each use. Rinse thoroughly and wipe dry to prevent water spots and mineral buildup.
• Avoid Abrasives: Do not use abrasive cleaners, steel wool, or scouring pads, as these can scratch the satin finish.
• Chemicals: Avoid harsh chemicals, bleach, or cleaners containing chlorides, as they can damage the stainless steel.
• Rust Prevention: While stainless steel is highly resistant to rust, prolonged contact with iron objects (e.g., cast iron pans, steel wool) can cause surface rust. Remove promptly.
• Drainage: The sink features a sloped bottom and channel grooves for efficient drainage. Ensure the sink is kept clear of debris to facilitate proper water flow.

Accessory Care:

• Bamboo Cutting Board: Hand wash with mild soap and water. Do not soak or put in a dishwasher. Periodically apply food-grade mineral oil to maintain the wood.
• Roll-Up Dish Drying Rack: This rack is dishwasher-safe. For best results, hand wash with mild soap and water.
• Protective Bottom Grid: Clean with warm, soapy water. The grid can be removed for easier cleaning of the sink basin.

Figure 6.1: NoiseDefend Technology and Easy-to-Clean Corners.

7. Troubleshooting

This section addresses common concerns you might encounter with your sink.

If you encounter issues not covered here or require further assistance, please contact Kraus Customer Support.

8. Warranty Information

KRAUS products are manufactured under the highest quality standards and will provide years of trouble-free performance. This product is backed by a Lifetime Limited Warranty. For complete warranty details, please visit the official Kraus website or refer to the warranty documentation included with your purchase.

9. Customer Support

For technical assistance, replacement parts, or any other inquiries, please contact Kraus Customer Support:

• Website: www.kraususa.com
• User Manual (PDF): Download Here
• Installation Manual (PDF): Download Here

Please have your model number (KWU110-30) and date of purchase ready when contacting support.