HASAKEE Q8 FPV Drone User Manual

1. Introduction

Thank you for purchasing the HASAKEE Q8 FPV Drone. This quadcopter is designed for an enjoyable and intuitive flying experience, suitable for both beginners and experienced pilots. With its 1080P HD camera, advanced flight modes, and durable design, the Q8 drone offers a unique perspective and endless fun. Please read this manual thoroughly before operating the drone to ensure safe and optimal performance.

Figure 1.1: HASAKEE Q8 FPV Drone, remote controller, and modular batteries.

2. Safety Guidelines

WARNING: To prevent potential hazards, always follow these safety precautions. Improper use can lead to injury or damage.

• Always operate the drone in open, clear areas, away from people, animals, buildings, and power lines.
• Maintain a safe distance from the drone during flight.
• Do not fly in strong winds or adverse weather conditions.
• Ensure the drone battery is fully charged before each flight.
• Battery Charging Caution: Use only the provided charging cable and a compatible power source. Monitor the battery during charging and disconnect immediately if you observe any signs of overheating, swelling, or unusual odor. Do not leave charging batteries unattended.
• Keep fingers and loose clothing away from propellers when the drone is powered on.
• This product contains small parts and is not suitable for children under 3 years old. Adult supervision is recommended for all users, especially children.
• Do not attempt to modify or disassemble the drone or its components.

3. Package Contents

• HASAKEE Q8 FPV Drone
• Remote Controller
• Modular Batteries (Quantity may vary, typically 2)
• USB Charging Cable
• Spare Propellers
• Screwdriver
• User Manual

Figure 3.1: Typical package contents for the HASAKEE Q8 FPV Drone.

4. Component Identification

4.1 Drone Components

• Propellers: Four main propellers for lift and thrust.
• Protective Circle: Illuminating protective ring around the propellers for safety and night visibility.
• HD Camera: Integrated 1080P camera for photo and video capture.
• Battery Compartment: Located at the rear for modular battery insertion.
• LED Lights: Bright yellow LEDs for enhanced visibility and night flight.

Figure 4.1: Drone components highlighting the protective circle and modular battery.

Figure 4.2: The drone's illuminating protective circle and body lights.

4.2 Remote Controller Components

• Left Joystick: Controls altitude (up/down) and rotation (left/right).
• Right Joystick: Controls forward/backward and left/right movement.
• Phone Holder: Adjustable clamp to secure your smartphone for FPV viewing.
• One-Key Take-off/Landing Button: Initiates automatic take-off or landing.
• Speed Switch Button: Toggles between low, medium, and high-speed modes.
• Headless Mode Button: Activates headless mode for simplified orientation.
• One-Key Return Button: Initiates automatic return to the take-off point.
• 3D Flip Button: Executes a 360-degree flip.

Figure 4.3: Remote controller with smartphone for FPV viewing.

5. Setup

5.1 Charging the Drone Battery

1. Connect the drone battery to the USB charging cable.
2. Plug the USB cable into a 5V/1A USB power adapter (not included) or a computer USB port.
3. The indicator light on the USB cable will show charging status (refer to cable instructions for specific light behavior).
4. Charging typically takes approximately 60-90 minutes. Disconnect once fully charged.

IMPORTANT: Always supervise the battery during charging. Do not overcharge. If the battery shows any signs of damage, swelling, or overheating, discontinue use and dispose of it properly.

5.2 Installing the Drone Battery

1. Ensure the drone is powered off.
2. Locate the battery compartment at the rear of the drone.
3. Gently slide the charged battery into the compartment until it clicks securely into place.

5.3 Installing Propellers

The drone comes with pre-installed propellers. If replacement is needed:

1. Identify the 'A' and 'B' markings on the propellers and the drone's motor arms.
2. Match the 'A' propellers to the 'A' motor arms and 'B' propellers to the 'B' motor arms.
3. Press the propellers firmly onto the motor shafts until they are secure.

5.4 Remote Controller Battery Installation

The remote controller requires 3 x AAA batteries (not included).

1. Open the battery compartment on the back of the remote controller.
2. Insert the AAA batteries, ensuring correct polarity (+/-).
3. Close the battery compartment cover.

5.5 App Installation and Wi-Fi Connection

1. Download the dedicated HASAKEE FPV app from your smartphone's app store (iOS and Android compatible).
2. Power on the drone. The drone's Wi-Fi signal will become active.
3. On your smartphone, go to Wi-Fi settings and connect to the drone's Wi-Fi network (usually named 'HASAKEE-Q8' or similar).
4. Open the HASAKEE FPV app. The live video feed from the drone's camera should appear.

6. Operating Instructions

6.1 Pairing the Drone and Controller

1. Place the drone on a flat, level surface.
2. Power on the drone. The drone's indicator lights will flash.
3. Power on the remote controller.
4. Push the left joystick all the way up, then all the way down. The drone's lights will stop flashing and become solid, indicating successful pairing.

6.2 Basic Flight Controls

• One-Key Take-off: Press the One-Key Take-off/Landing button. The drone will automatically ascend and hover at a stable altitude.
• Altitude Hold: The drone is equipped with an air pressure sensor to maintain a stable hovering height automatically.
• Adjusting Speed: Press the Speed Switch button to cycle through Low, Medium, and High-speed modes. Low speed is recommended for beginners.
• Headless Mode: Press the Headless Mode button. In this mode, the drone's orientation is relative to the pilot, simplifying control regardless of the drone's front direction.
• One-Key Landing: Press the One-Key Take-off/Landing button again. The drone will automatically descend and land.

Figure 6.1: One-key take-off, altitude hold, and speed modes.

Figure 6.2: Altitude Hold Function in action.

6.3 Advanced Features

• Gesture Control: Use specific hand gestures in front of the camera to trigger photo or video recording. An "OK" sign typically takes a photo, and a "PEACE" sign initiates video recording. The camera will count down before capturing.
• Smart Voice Control: Control the drone with simple voice commands through the app, such as "take off", "landing", "left", "right", "forward", "backward".
• Gravity Sensor Mode: In the app, activate Gravity Sensor Mode. You can then control the drone's movement (forward/backward, left/right) by tilting your mobile phone.
• Trajectory Flight Mode: Draw a flight path on the app interface, and the drone will automatically follow the designated route.
• 3D Flip: Press the 3D Flip button on the controller, then push the right joystick in any direction to perform a 360-degree flip.
• One-Key Return: Press the One-Key Return button. The drone will automatically fly back towards its take-off position.

Figure 6.3: Gesture control for photo and video capture.

Figure 6.4: Gravity control, trajectory flight, and smart voice control.

Figure 6.5: One-key 3D flips and high-speed spin.

6.4 FPV Real-Time Transmission

The drone's 1080P HD camera provides a real-time video feed to your connected smartphone, allowing for immersive First Person View (FPV) flying and easy photo/video capture.

Video 6.1: Official product video demonstrating various features including stable hovering, one-key rotation, HD camera, Wi-Fi real-time transmission, gesture control, gravity sensor mode, 3D flip, one-key return, and one-key landing.

7. Maintenance

• Cleaning: Use a soft, dry cloth to clean the drone and controller. Do not use harsh chemicals or solvents.
• Propeller Inspection: Regularly check propellers for damage (cracks, bends). Replace damaged propellers immediately using the provided spare parts.
• Storage: Store the drone and its components in a cool, dry place, away from direct sunlight and extreme temperatures. Remove batteries from the controller if storing for extended periods.
• Battery Care: Do not fully discharge batteries. Charge them periodically if not used for a long time to maintain battery health.

8. Troubleshooting

• Drone not responding: Ensure the drone and controller are fully charged and properly paired. Re-pair if necessary.
• Drone unstable during flight: Calibrate the drone on a flat surface. Check for damaged propellers and replace if needed. Ensure no debris is obstructing motors.
• No FPV feed: Ensure your smartphone is connected to the drone's Wi-Fi network. Restart the app and drone if connection issues persist. Check if your phone supports 5G Wi-Fi for optimal connection, as some users report 4G may not link up.
• Short flight time: Ensure the battery is fully charged. Battery performance may degrade over time; consider replacing old batteries.
• Drone flies away uncontrollably: Immediately press the One-Key Return button. Ensure you are flying in an open area and are familiar with controls before attempting advanced maneuvers.

9. Specifications

10. Warranty and Support

For warranty information and technical support, please refer to the contact details provided on the product packaging or visit the official HASAKEE website. Keep your purchase receipt as proof of purchase.