Pulsar Core FXQ38 BW Thermal Attachment - User Manual

1. Introduction

Thank you for choosing the Pulsar Core FXQ38 BW Thermal Attachment. This device is designed to provide advanced thermal imaging capabilities, functioning both as a standalone monocular and as a clip-on attachment for your traditional riflescope. Its robust construction and high-performance sensor ensure reliable operation in various conditions. This manual provides essential information for the safe and effective use of your device.

2. Safety Information

• Do not look directly at intense light sources through the device.
• Keep the device away from extreme temperatures and direct sunlight.
• Use only specified battery types (CR123A).
• Do not attempt to disassemble or modify the device. This will void the warranty and may cause damage.
• Ensure the device is securely mounted when used as a clip-on attachment to prevent accidental detachment.

3. Package Contents

Verify that all items are present in your package:

• Pulsar Core FXQ38 BW Thermal Attachment
• Carrying Case
• Eyepiece
• Two CR123A Batteries
• Cleaning Cloth
• User Manual (this document)

Figure 3.1: Pulsar Core FXQ38 BW Package Contents. Includes the thermal device, carrying case, eyepiece, batteries, and cleaning cloth.

4. Product Overview

The Pulsar Core FXQ38 BW is a compact and versatile thermal imaging device. It features an objective lens, an eyepiece (for monocular use), control buttons, and a battery compartment.

Figure 4.1: Front angled view of the Core FXQ38 BW.

Figure 4.2: Side view of the Core FXQ38 BW, showing control buttons.

Figure 4.3: Opposite side view of the Core FXQ38 BW.

Figure 4.4: Close-up of the eyepiece for monocular use.

Figure 4.5: Close-up of the objective lens and attachment point.

5. Setup

5.1 Battery Installation

The Core FXQ38 BW requires two CR123A batteries. Locate the battery compartment, typically on the side or bottom of the device. Insert the batteries according to the polarity indicators (+/-) inside the compartment. Close the battery cover securely.

5.2 Monocular Use

To use the device as a monocular, attach the provided eyepiece to the rear of the unit. Ensure it is securely fastened. Adjust the diopter on the eyepiece for clear focus.

5.3 Clip-on Attachment

To use the device as a thermal attachment for your riflescope, you will need a compatible DN clip-on adapter (not included). Attach the Core FXQ38 BW to the front of your riflescope using the adapter. This allows your traditional riflescope to remain zeroed while gaining thermal imaging capabilities.

6. Operating Instructions

6.1 Power On/Off

Press and hold the power button (refer to product overview images for button location) for a few seconds to turn the device on. The display will illuminate. To turn off, press and hold the power button again until the display shuts down.

6.2 Digital Zoom

The Core FXQ38 BW features a 2x digital zoom. Use the designated zoom buttons (often marked with '+' and '-') to cycle through magnification levels. In monocular mode, the device offers a 6.2x magnification.

6.3 Calibration Modes

The device supports manual, automatic, and semi-automatic calibration modes to optimize image quality. Consult the on-screen menu (accessed via control buttons) to select your preferred calibration method. Calibration helps to remove image artifacts and improve thermal uniformity.

6.4 Pixel Repair Function

If you notice any 'stuck' or 'dead' pixels on the display, the device includes a pixel repair function. Access this feature through the device's menu to remap or disable faulty pixels, improving your viewing experience.

6.5 Thermal Imaging Examples

The Core FXQ38 BW provides clear thermal imagery, allowing for detection of objects up to 1475 yards. Below are examples of thermal images captured by the device.

Figure 6.1: Thermal view of a coyote, demonstrating target identification.

Figure 6.2: Thermal view of wild boars, highlighting detection capabilities.

7. Maintenance

7.1 Cleaning

Use the provided cleaning cloth to gently wipe the lenses and exterior surfaces. For stubborn dirt, a small amount of lens cleaning solution designed for optics can be applied to the cloth. Do not use abrasive materials or harsh chemicals.

7.2 Storage

When not in use, store the device in its carrying case in a cool, dry place. Remove batteries if the device will not be used for an extended period to prevent leakage.

8. Troubleshooting

• Device does not power on: Check battery orientation and ensure batteries are fully charged. Try new batteries.
• Poor image quality: Perform a calibration. Ensure lenses are clean. Adjust focus if applicable.
• Display flickering: This may indicate low battery. Replace or recharge batteries.
• Buttons unresponsive: Power cycle the device. If the issue persists, contact customer support.

9. Specifications

10. Warranty and Support

Pulsar products are manufactured with high-quality materials and undergo rigorous quality control. For warranty information, technical support, or service inquiries, please refer to the official Pulsar website or contact your authorized dealer. Keep your proof of purchase for warranty claims.